|
|
|
World's second largest manufacturer of Wheel Loaders More than 30.000 units of production and sales in 2008 world's largest Wheel Loader production line the products fully meet various applications
|
|
ZL15H WHEEL LOADER
Main specifications:
* operating weight: 5500kg
* rated power: 45kW Perkins Engine
* standard Bucket capacity: 0.75 cubic meters
ZL75H WHEEL LOADER
Main specifications:
* operating weight: 23500kg
* rated power: 216kW Cummins Engine
* standard Bucket capacity: 4.2 cubic meters
|
|
CG938H TUV-CE TIRE3
Engine:original CUMMINS QSB6.7
Power:119kw
Transmission:ZF Transmission
Operating Mass 12500kg
Rated Bucket Capacity 2.1m3
Rated Load 3800kg
Maximum traction 110kN
Grade Ability 260
Breakout Force 120kN
Dimension:7330*2470*3300
|
|
CG990H TUV-CE,TIRE3
Engine model:Original CUMMINS QSM11
Rated power:250/2100
Transmission:ZF transmission
Operating weight:31.5T
Rated load weight:9 T
Rated bucket capacity:5T
Traction force:260KN
Dimesion:9459*3500*3821
|
|
- OveralL data
- Operating Weight: 11400Kg
- Bucket Capacity: 2.0 m3
- Rated Load: 3500kg
- Maximum traction: 98KN
- Grade ability: 25
- Breakout force(tilt cylinder):110kn
- Static Tipping Load (full 35B)F 87kN
|
|
CG958H TUV-CE TIRE3
Engine:Original CUMMINS engine QSB6.7
Power:164kw
Transmission;ZF transmission
Operating Mass 18.T
Rated Bucket Capacity 3.1m3
Rated Load 5T
Maximum traction 165kN
Breakout Force 180kN
Dimension:8180*3000*3540
|
|
Wheel Loaders : WA900-3
Komatsu-integrated design
For the best value, reliability, and versatility. Hydraulics, power train, frame, and all other major components are engineered by Komatsu. You get a machine with components that are designed to work together to deliver higher production levels, greater reliability, and more versatility.
High productivity and fuel efficiency
High performance SAA12V140E-3 engine
Low fuel consumption
Dual-mode engine power select system
Automatic transmission with shift timing select system
Superior dumping height and reach
Standard, high-lift and Load & Carry booms are available in order to suit your application.
A full range of buckets and wear parts
|
|
| ... products without technical information |
| |
... see all the products in the category
Loaders
|
If you need accurate, high speed weigh price labelling with longer running times, look no further than the WPL 8160. Its specifically designed to handle small to medium size retail packs where, typically, high packing speeds of 160 packs/min are required.
Speed alone, however, is not enough because the weighing of every pack is vital to consistently efficient processing and production and this is where the 8160 excels.
To ensure that every pack is pitched correctly across the weigh table, driven side belts provide positive control and correct orientation of incoming packs. These, along with side guides that are manually adjusted to set the pack width at the input of the machine, ensure product runs true and correctly spaced over the weigh table.
The machine can regulate its own speed according to product input.
|
|
GH
GH is a modern labeling device for flexible, variable-weight pricing and labeling. A rational solution for labeling larger quantities of merchandise, it can be used with different load receptors of different sizes and weighing ranges and is available in the form of a desktop or free-standing unit with stand or installation frame.
|
|
The group of weighing and automatic labelling at Gemini high speed functions under a computing system able to treat the weighings with speeds going to 150 products per minute.
For detailed information, visit www.preciamolen.com
|
|
|
|
|
|
The group of weighing manual labelling I 500 makes it possible to carry out the labelling of the fresh produce in the small boats under films.
Of a great facility of use thanks to its touchscreen, I 500 gives access easily the operations of weighing labelling (use, programming).
I 500 was designed for an integration in the corporate network (operation multipost, exchange of information by network, Ethernet TCP/IP or key USB, connection to the databases of the company.
Its great memory size is the guarantee of a traceability total (number of operation and single DSD, management of the batches, data of traceability skeletal per family of products.
For a faster seizure of the data, the terminal I 500 can be equipped with a keyboard of the type PC and a reader of bar code.
The group I 500 is composed:
Of a terminal of weighing I 500:
- an accessory measures
- 2 ports series
- 1 parallel port
- 1 port USB
Of a platform R1 DLS
Of a printer P950 or P970
Of a key USB 64 Mo
Of CD creation of labels
In option:
- second printer
- second and third ways of measurement
- Ethernet port
|
|
ES 7001
1 Printer from above
Weighing range 3 / 6 / 8 kg
Scale increment 1 / 2 / 5 g
The new ES 7000 provides fully automatic price labelling of the highest standard. Utilizing dynamic weighing technology, the system achieves a labelling output up to 120 packs per minute with maximum precision*.
The ES 7000 Series
ES 7001 | ES 7002 | ES 7003 | ES 7004 | ES 7005 | ES 7010 | ES 7011 | ES 7012 | ES 7013 | ES 7014 | ES 7022 | ES 7023 | ES 7100 | ES 7411
|
|
Burt labelers are exceptional for any roll through application. This horizontal labeler accommodates diameters from 112 to 704 and will run metal, glass, plastic and aerosol containers.
-Models: 408 and 704
-Speeds up to 800 CPM
-Labels replenished without stopping production
-Narrow label packages available
-Container changeovers in 15 minutes
-Valco lap system available
|
|
ES 9002
2 Printer from above
The new ES 9002 provides fully automatic price labelling of the highest standard. Utilizing dynamic weighing technology, the system achieves a labelling output of 150 packs per minute with maximum precision.
The ES 9000 Series
ES 9001 | ES 9002 | ES 9003 | ES 9004 | ES 9005 | ES 9010 | ES 9011 | ES 9012 | ES 9013 | ES 9014 | ES 9022 | ES 9023 | ES 9800
|
|
| ... products without technical information |
| |
Earth Pressure Balance Machines (EPBM)
EPBMs are used for high powered pipe jacking with precise control of earth pressure via operator control of the cutterhead with pressure sensors, jacking speed, screw conveyor operation and foam and bentonite slurry additive system for conditioning of spoils. Akkerman manufactures EPBMs for installation of pipe in the 96"-168" OD range.
|
|
|
|
|
|
If the geology of your tunnel ranges from soft soils to weathered rock, then a Robbins Earth Pressure Balance Machine (EPBM) is the correct technical solution for your project. This is particularly true when your project is located in an urban environment and ground surface subsidence cannot be tolerated.
EPBMs are utilized in the construction of rail tunnels, metropolitan subway systems, highway tunnels, and other projects where the tunnel will be constructed either partly or completely in soft soil beneath the water table.
Robbins has integrated over 50 years of TBM design and jobsite experience into our EPBMs. Nobody has a wider range of experience designing innovative machinery to cope with difficult underground conditions. Our engineers will tailor your EPBM to handle the specific challenges of your project. From "Smooth Flow" cutterheads that reduce friction to super-reliable sealing systems and Variable Frequency Cutterhead Drives, Robbins has taken the traditional EPB design to the next level.
|
|
Earth pressure balance tunnel boring machines
Historically, EPBs were developed in order to do away with the mucking system and the reprocessing of boring slurry. To do this, the soil must ideally consist of fine elements (clay and silt) and natural water. This type of mix is rare, which is why foams were developed.
Basic principle
The earth pressure balance tunnel boring machine or EPB consists of a cutting chamber located behind the cutterhead. This chamber is used to mix the soil + water foam. It is maintained under pressure by the mucking system. The system consists of a screw conveyor whose speed is controlled so that constant pressure inside the chamber is guaranteed. The material exits the screw conveyor via a hatch that can be closed when the TBM is shut down. The material is then removed by a belt conveyor and/or train cars circulating in the tunnel.
|
|
Slurry shield tunnel boring machines
Bentonite slurry, consisting of a specific clay and water mixture is universally used in boring and digging operations. The slurry has numerous properties: sealing of the cutting face, reduced friction on the TBM's structure, and transport of cuttings to the separation plant outside the tunnel.
The basic principle of this TBM is to maintain the tunnel's cutting face during the excavation phase by filling the working chamber, located behind the cutterhead, with slurry.
Slurry pressure is carefully controlled by a large air bubble which is maintained by a separately-controlled air supply system. This air bubble acts as a damper by absorbing sudden variations in mucking output.
|
|
|
Herrenknecht Earth Pressure Balance (EPB) Shields are in their element in soft ground. Cohesive and incohesive soils with high clay or silt content and low water permeability provide the ideal conditions for EPB tunnelling.
|
|
|
|
|
|
BinMasters SmartBob2 weight and cable inventory management system is designed for powder and bulk solids measurement in bins and storage silos up to 180 feet tall. Consisting of SmartBob sensors, control consoles and Windows-based eBob reporting software, BinMaster provides an automated wired or wireless inventory monitoring and reporting solution for the grain, seed, feed, cement, coal, aggregates, food, chemical, pharmaceutical and plastics industries. SmartBob is ideal for any location where ongoing inventory management and remote reporting is required for just one bin or a network of up to 120 small and large bins.
Measurement devices include the SmartBob2 remote for bins or silos up to 180 feet tall including a high temperature model to operate in extreme conditions from 240 to 500 degrees Fahrenheit, plus the SmartBob-TS1 for smaller bins up to 40 feet tall. SmartBob2 can be uniquely configured using a variety of probe designs and extensions for solid, slurry, and liquid applications. Long-lasting, hassle-free service is ensured by SmartBobs unsurpassed cable cleaning system.
SmartBob2 is extremely rugged, featuring the industrys strongest cable and motor design which is completely sealed in a strong, lightweight molded polycarbonate enclosure which is explosion proof and rated for Class II, Groups E, F & G certifications. Requiring no field calibration, SmartBob2 is easy to install, needs minimal wiring, or can be used with the SmartBob wireless transceiver. SmartBob2 provides enhanced surge / transient protection for the RS-485 port for protection against power surges or indirect lightning strikes on tall silos.
|
|
Data logger MDS-Floater 2
For water level monitoring down to 300 mts. depths. This completely pressure tight instrument combines float technology with advanced electronic. 15 years battery function is guaranteed!
|
|
| ... products without technical information |
| |
- high speeds with total integration
- greater than 95% efficiency
- rapid former changes using the auto connect & upload assist features
- wastage rates down as low as 0.5%
- small footprint reduces floor space costs
- all of the above deliver lowest cost of ownership and highest return on investment
|
|
|
|
|
|
Scope of use
Packing loose and powdered materials like: tea, beans and ground coffee, grits, rice, candies, raisins and nuts, chemical granulated products, flour, sugar, buttons, nuts etc. into sealable materials. Additionally they are used for packing liquid and semi-liquid products, such as: milk, ketchup, mayonnaise, mineral water, etc.
There are two versions of the device; packages can be sealed by permanently heating jaws with adjustable temperature (laminates) or resistance tape by impulses with adjustable power flow time (PE).
Packaging material
Polyethylene foil, polypropylene, multi-layer laminates, polyethylene covered paper and other thermo-sealable materials.
Operation principle
Foil is unfolded off the bobbin drum and moves through feeding rolls towards the forming pipe (so-called tube). Here the foil is welded into a sleeve and the date is printed. Then the foil is moved by rubber driving belts to any fixed distance or by a stroke reflecting the graphic sign printed on the foil. Fixed amount of the product is then batched to the formed sleeve in a fixed time. Filled pouch is closed with a lateral weld, cut off and it slides down along a special skid or moves towards a stacking channel.
|
|
Sometimes it's the simple ideas that really click with our customers - such as marrying the Kliklok Compak II, one of the most well-known bagmakers in the snack food industry, and a compact Yamato 510 Alpha weigher with a custom weigher support structure. This union begets a very reliable packaging system with a minimal footprint, short setup time, renowned ease-of-use and extremely low maintenance needs - at a price that will fit any budget.
The Uni2 (pronounced unidos, meaning united, all-in-one, integrated) Packaging System was originally put together specifically for low- to mid-volume snack manufacturers in the Mexico, Central and Latin America markets. The Uni2 produces pillow-pouch bags at speeds up to 80 bpm and can handle bag widths up to 250 mm. KW's exclusive Insight icon-based, multilingual, colour touch screen operator interface includes automatic program setup and instant program changeover. A code dater and a quick-change former assembly round out the feature set.
|
|
|
|
see the results for the following category : 
