|
|
Loading ramps - electro-hydraulic platforms
Designed to compensate any differences in height between the loading docks and the differing truck load platform heights, KOPRON ramps are planned and built in compliance with existing EEC regulations. KOPRON carries out thorough calculations on the nominal carrying capacity and strict qualitative choice of the accessories and electrical and pneumatic components to make sure that our ramps can resist to harsh handling, knocking and overloading. They are very easy to operate and operator-friendly and each control panel comes with a detailed instructions manual.
KOPRON ramps can satisfy even the most diverse demands and come in a wide range of models:
- platform ramps
- telescopic ramps
- pantograph ramps
- bunk ramps
- counterbalanced drawbridge ramps (in Fe and Al)
- removable projecting ramps (in Fe and Al)
|
|
| ... products without technical information |
| |
Main advantages:
- Self or non self propelled
- Multimodal steering
- AGV or rail mounted system
- Hidraulic elevation system for palletized cargos
- Low noise level
- Perpendicular movements of the materials handled
- Maximum safety for operators and for the material handled
- Easy to operate...
|
|
| ... products without technical information |
| |
TRAY FOR SKIP WASHING PLATFORM
In order to respect the environment, SECATOL present a special tray for the skip washing platform to hold back the waste waters.
The tray is placed under the front part of the platform and when lifting this front part, the tray can be removed.
The tray has the following equipments:
- 4 lifting eyes to facilitate the prehension.
- An overflow outlet to evacuate the clear waters after the settling and decanting of the waste waters
|
|
SKIP WASHING PLATFORM
PATENTED EQUIPMENT
To facilitate the cleaning and washing of the SECATOL skip range
The SECANET skip washing platform has been designed to improve the cleanliness on the building sites by facilitating the cleaning and maintenance of the SECATOL range of skips.
The two ladders, the platform, the guardrail and the security handrail on the washing area make the skip washing platform a secured element to use.
All types of SECATOL skips can be placed onto the platform by means of different abutments.
The platform can easily be placed with a forklift truck or with a crane and can be fitted on the floor with pins on the feet.
The platform is easily washable and the mesh metal on the platform does not held back the washing waters. .
If needed, the washing platform can be supplied with a special tray to hold back the waste waters.
The skip washing platform is available in painted or galvanized version.
|
|
ThermalTray HP (high profile, high fins) provides a solid, thermo-conductive platform for all cold- and warm-temperature laboratory procedures. Eliminates frustrating problems commonly associated with using only ice to hold bench-top operations at 4°C.
A single pan of ice can maintain samples below 4°C for over 10 hours without ever changing ice (see also product sheet).
Applications
Eliminates tube, plate, specimen tipping or drowning
Stable platform for all Coolsinks and CoolRacks
Keep samples dry and organized
Easy working with wet or dry ice and LN2
Long-term cooling or warming
Histological procedures
Specimen temperature control
Cold room replacement
Features
Rapid thermo-conductivity through a patented precision machined aluminum alloy construction
Stable dry platform for ice pans and water baths
>10 hrs of worry free experimentation on one (maxi) pan of ice (see also product sheet)
Ideal for use with any CoolSink or CoolRack M, CF, PCR 96 or any other thermally conductive tools
Works best with Ice Pan Maxi 9L (see also CoolSystems)
|
|
... see all the products in the category
Labware
|
MicroTCA Integrated Platforms
Kontron offers comprehensive pre-integration and pre-validation services for its MicroTCA open modular platforms. Available in different form factors, the line of Kontron OM MicroTCA platforms are reliable, scaleable and always the best configuration from the very start.
|
|
Tubular steel construction. Injury safe structure.
Base covered with a non-slip multi-fold wooden plate.
Panel resists damp, impact and scratching.
Two fixed + two pivoting wheels with brakes, complying with
European standard EN 1757-3 (Safety of handling trolleys).
|
|
|
These heavy duty platform trucks are offered in a vast choice of sizes and casters to answer the most varied needs as far as the required capacity and type of use are concerned. The 1.25" tubular handle can be inserted at any one end of the platform. Choice of a steel reinforced deck with two 2" x 1" rectangular channels running along its lenght for added strengt and rigidity or of varnished hard wood 3/4" thick. Fitted with 2 swivel and 2 rigid casters. Quality finish. Optional rubber bumpers may be installed at the steel platform corners. Additional tubular handles available.
|
|
4403 Utility Platform Truck, 5" dia x 1 1/4" wide (12.7 cm x 3.2 cm) Rubber Casters, Crossbar Handle
Built for durability and efficient mobility of heavy loads.
Complete range of models for versatility.
Sturdy structural foam construction won%u2019t rust, dent, chip, peel, or splinter.
Virtually maintenance free.
Available in 1 or 2 crossbar handle versions to help maneuver loads easily.
9T06 Heavy-Duty Platform Convertible Wagon with 16" (40.6 cm) Pneumatic Wheels
Ideal for transporting heavy or bulky loads in manufacturing, industrial, and groundskeeping settings.
Constructed of a structural foam body.
All wagons come standard with a T-Bar Handle for pulling by hand, optional tow package allows for Pintle or Hook & Eye hitching methods.
A rear hitch allows training several wagons together to eliminate multiple trips.
16" (40.6 cm) pneumatic wheels
Increases capacity to 20 cu. ft. (.6m3) and helps keep small loads intact.
|
|
Herkulex - Aluminium-Transport Equipment :
* this truck can be used for almost any application eg. garage, office
* Delivery within Germany "free of charge"!
|
|
| ... products without technical information |
| |
Ideal for treating medium and large sized parts
Spray washing using water and detergents. They can be used in sectors such us : maintenance, thermal treatments, paint stripping.
|
|
Hot water washing machines and industrial detergents washing machines. Plating and pump in Aisi 304.
The whole range can be fitted with accessories in order to improve the quality of the cleaning and decrease maintenance work to optimize times and costs.
|
|
| ... products without technical information |
| |
Presto PLP
Stand-on pallet truck
With robust fold-down driver platform, for longer travel distances and extended work cycles.
Foldable side guards. Optional fixed driver protected platform.
|
|
|
The Linde Electric Pallet Truck with Rider Plattform T20SP offers convenience and safety with its innovative driver’s platform, set at a 45° angle. The standard electric steering and powerful 3kW-AC-motor can make a great difference in any warehouse. Active side stabilisers ensure perfect stability and road traction. All components have a service-friendly CAN bus structure that allows you to set each parameter individually for maximum handling performance on the T20SP. Service calls are needed only every 1000 hours of use or once a year.
|
|
MP20X, MP20XV
Capacity: 2000kg
- Electric pallet truck with folding operator platform
- Side or rear protection models with fixed operator platform (MP20X)
- Combi MOSFET electronic control technology
- Yale AC Technology
- Ride-on or pedestrian operation
- Brushless power steering motor (MP20X)
- Rear fixed protection with fixed platform (MP20XV)
|
|
TENSIONLESS INSPECTION MACHINE
FOR ELASTOMER FABRICS WITH RELAX BELT WITH PLATFORM
Mod. ISRP 220
The inspection, winding tensionless machine
ISR 07’ TENSIONLESS,
provided of axial or tangential unwinding for big rolls, it’, an excellent machine for the elastomer fabrics.
The fabric gently comes situated, in the form of small folding, on a conveyor belt, that allows it to relax and particularly as it regards the elastic materials to resume its own elasticity. An additional conveyor belt incline ® (Exclusive Patent COMATEX) accompanies the fabric, without altering its acquired stability, to the summit of the table of inspection illuminated, where possible to view and mark the defects eventually found.
Before the end phase of winding, a special software Comatex combined to the electronic sensor of tension, it allows to maintain results of relaxation and to get rolls without residual tension.
Technical characteristics:
•Inlet fabric from J-BOX with synchronization / Small rolls / Plait / Big rolls
•Relax conveyor belt
•Patent conveyor belt
•Inclined inspection table with rear light
•Up light
•Platform
•Auto-centring winding unit
•Reading fabric tension with adjustment of the bad tensions
•Winding of the roll
•Adjustable compactness of the rolls
•ø500 mm diameter knitted fabric rolls
•3÷60 m/min. speed control without step.
Optional:
•Digital weight measuring system
•Automatic linear cut
•Wood or special light
•Comatex software for store all the faults
•Barcode labelling for more type of error
•Mark-fault one or more fault
•Doubling system in 2 or 4
•Packing system
|
|
TENSIONLESS INSPECTION MACHINE
FOR ELASTOMER FABRICS WITH RELAX BELT
Mod. ISR 220
The inspection, winding tensionless machine
ISR 07’ TENSIONLESS,
provided of axial or tangential unwinding for big rolls, it’, an excellent machine for the elastomer fabrics.
The fabric gently comes situated, in the form of small folding, on a conveyor belt, that allows it to relax and particularly as it regards the elastic materials to resume its own elasticity. An additional conveyor belt incline ® (Exclusive Patent COMATEX) accompanies the fabric, without altering its acquired stability, to the summit of the table of inspection illuminated, where possible to view and mark the defects eventually found.
Before the end phase of winding, a special software Comatex combined to the electronic sensor of tension, it allows to maintain results of relaxation and to get rolls without residual tension.
Technical characteristics:
•Inlet fabric from J-BOX with synchronization / Small rolls / Plait / Big rolls
•Relax conveyor belt
•Patent conveyor belt
•Inclined inspection table with rear light
•Up light
•Auto-centring winding unit
•Reading fabric tension with adjustment of the bad tensions
•Winding of the roll
•Adjustable compactness of the rolls
•ø500 mm diameter knitted fabric rolls
•3÷60 m/min. speed control without step.
Optional:
•Digital weight measuring system
•Automatic linear cut
•Wood or special light
•Comatex software for store all the faults
•Barcode labelling for more type of error
•Mark-fault one or more fault
•Doubling system in 2 or 4
•Packing system
|
|
Used in applications such as train doors or funicular or cable railways, these automatic doors play an important role in public transportation. Safety, reliability and comfort are enhanced; a train service according to the schedule is ensured while the passengers are protected against potentially harmful incidents.
Modular product structures allow to achieve customized installation solutions for automatic doors in public transport systems.
|
|
| ... products without technical information |
| |
|
