|
|
The media duct of Zero.Point.Systems® is with a very simple mechanism and integrable in any cylinders of Zero.Point.Systems®. The media ducts goal is to transfer any fluids (water, hydr., oil) or gases, from pallet to pallet.
The opening of the media duct is mechanically and automatically during the starting release of the cylinder and inversely during the unrelease of the cylinder, the media ducts is simultaneously closed.
Advantages and technical data:
• Leakage free
• Entirely stainless
• Easier assembling
• Standard pressure 0-500 bar
• Vacuum function
• Coupling under pressure
• Standard temperature until 160°C
• Different application domains
• Media duct couples by pull in force and the automatic movement force of Zeropoint Quickclamping cylinder
• Short coupling way (ex.: K20, nominal width 7 mm, couple way 2 mm)
• Great position tolerance (ex.: K20, nominal width 7 mm, tolerance 2 mm)
• Surface cleaning through blowing off
• High pressure cleaning through fluid and gas
• Long durability, also in case of pulsating operation
• Available for any types of Zero-Point-Systems®´ cylinders |
|
| DSTI offers a number of standard & custom union designs that have been used in the robotics industry. These assemblies can be used to transfer air & electrical signal data to & from the rotating gripping system. |
|
SKF Bearing professional fitting tool kit TMFT 36T
TMFT 36, contains 36 impact rings, 3 impact sleeves and a dead-blow hammer packed in a carrying case.
The impact rings are made of high-impact modified polyamide.
The impact sleeves are made of glass fibre-reinforced, high-impact modified polyamide, which is super-tough, strong and lightweight.
The dead-blow hammer has nylon faces and is steel-shot loaded for maximum impact. The welded-on steel handle, with comfortable rubber-grip for good handling, absorbs shock and vibration.
In addition to mounting bearings manufacturers, the TMFT 36 is also suitable for mounting other components such as bushings, professional seals and pulleys. |
|
Professional fitting Tool FT 33
For careful mounting of roller bearings on shafts and cases. Universal use for suppliers of bearings with a bore diameter from 10 to 50 mm. Easily carried in a handy case, including a recoil-free hammer.
3 Impact sleeves and 33 impact rings
No mechanical damage of the bearing
Also suitable for the mounting of sleeves, seals rings, pulleys and so forth |
|
| EDDYTHERM® induction heaters offer the ideal solution for fast, accurate, safe and efficient heating and perfect demagnetization of bearings supplier, couplings, gears and other shrink-fitted parts. A wide range of models offers just the right capacity for nearly any size of workpiece |
|
FAG mounting tool sets allow cost-effective and safe mounting of rolling suppliers of bearings with bore diameters of 10 to 50 mm or outside diameters of 16 to 110 mm. They can also be used to easily mount sleeves, intermediate rings, professional seals and similar parts. Tightly fitted inner rings can be driven onto the shaft or outer ring into the housing bore by hitting the mounting sleeve with the hammer. This prevents the mounting forces being transmitted through the rolling elements and raceways, which can lead to damage. The carefully matched FAG precision parts ensure that the forces are uniformly transmitted to the side faces of the bearing rings.
Great care is also required during dismounting. The extraction tool must always be applied to the ring to be removed. Mechanical FAG extractors can be used to dismount small rolling earings up to approx. 100 mm bore diameter that are located with a tight fit on a shaft or in a housing. The extraction force is normally applied by means of a threaded spindle manufacturers. A hydraulic spindle facilitates work with hydraulic FAG extractors for larger rolling bearings. Extraction forces of up to 400 kN (40 tonnes) can be generated in this case. |
|
Clinch studs are inserted through pre-pierced sheets into clinch dies. Initially the hole in the sheet is widened by the calibrating collar. After that, the clinch stud is precentred by means of the calibrating collar. Finally, the sheet material is forced into the annular groove and the Torx locking feature is pressed in. A very high loadcarrying capacity is achieved by means of the patented underhead geometry.
The reduction of production stages and of energy consumption results in considerable cost savings. An additional advantage is the possibility of processing several clinch studs in a single stage. |
|
The tooling can be used with nearly all tool and professional press systems. Standardised components are used normally. This allows very rapid individual setting up of punch blocks and dies. The simple and intelligent construction guarantees reliable function of all system components. Due to the variable options of feeding techniques this system is suitable for small-batch and large-series facilities.
The versatility of applications, the profitableness, and the efficiency of the processing method, as well as the multitude of adcantages compared with traditional joining techniques make more and more users all over the world to rely on this unique system. |
|
ODE in these years developed a range of manufacturers of solenoid valves for sanitary water atuomated control in public and private toilets. The solenoid manufacturers cock includes a mixing station for cold/hot water. The valve control can be done with an electronic circuit that is available on request from ODE.
Contact ODE filling the information request form in order to receive all datas you need. |
|
| ... products without technical information |
| |
CAPACITY: 2"
PNEUMATIC INPUT: MAX 7 BAR
WEIGHT: 85 KG
DIMENSIONS L x D x H: 900 x 650 x 1100 mm
|
|
Assembling of professional hose and tube parts for automotive applications.
Our standard assembly machine manufacturer LTM-106 has a frame with variable height, lockable wheels, illumination, pneumatic system and a Lantz Control System. This machine can be equipped with different types of tools or fixtures for assembly operations. It can have one fixed table for a high volume product or we can use a quick change system. Change the assembly fixture and the machine will run the corresponding program. |
|
Pace1 Professional press
Pace1 Press is the first battery operated pre-assembling machine for cutting rings. It's weight is only 7kg and that makes it very easy to use. It is designed for 6-42mm pipes and there is plenty of force even for stainless steel assemblies. Pressure is fully adjustable. Machine has been tested with all leading cutting ring and professional fitting solutions on the market. |
|
Pace1 Professional press
Pace1 Press is the first battery operated pre-assembling machine for cutting rings. It's weight is only 7kg and that makes it very easy to use. It is designed for 6-42mm pipes and there is plenty of force even for stainless steel assemblies. Pressure is fully adjustable. Machine has been tested with all leading cutting ring and professional fitting solutions on the market. |
|
Pace1 Professional press
Light, but extremely powerful.
Designed for hydraulic and industrial sprinkler pipes
(also High Fog) installations.
Easy and simple to use: Socket change and pressure adjustment take just few seconds.
Easy to move around with the shoulder strap, that also
reduces stress on arms.
Revolutionary technology protected by several global patents.
. |
|
UNISPEED US-FL/01 - MODEL MAN
PRE-ASSEMBLING 6 > 42x4 mm
37° FLARING 6 > 42x4 mm
MATERIALS AISI 316 TI - ST 37.4
WEIGHT 40 KG
DIMENSIONS L x D x H 350 x 400 x 270 mm
TOOLS HOLDER OPTIONAL
OIL included
UNISPEED US-FL/01 - MODEL EL
PRE-ASSEMBLING 6 > 42x4 mm
37° FLARING 6 > 42x4 mm
MATERIALS AISI 316 TI - ST 37.4
WEIGHT 58 KG
DIMENSIONS L x D x H 430 x 600 x 270 mm
STANDARD VOLTAGE 400V 50Hz 3PH
MOTOR POWER 0.75 KW
TOOLS HOLDER OPTIONAL
OIL included
|
|
PRE-ASSEMBLING: 6 > 42x4 mm
37° FLARING: 6 > 42x4 mm
CUTTING: MAX Ø 100 mm
BENDING: 6 > 42x4 mm
DEBURRING: MAX Ø 42x4 mm
MATERIALS: AISI 316 TI - ST 37.4
DIMENSIONS L x D x H: 830 x 1260 x 1210 mm
WEIGHT: 262 KG
STANDARD VOLTAGE: 230V 50Hz 1PH
MOTOR POWER: 4.6 KW MAX
CONTROL BOARD: included
OIL: included
COMPRESSED AIR: 220 L/MIN.
TOOLS HOLDER: OPTIONAL
37° FLARING BLOCK: OPTIONAL
|
|
Pace1 Professional press
Pace1 Press is the first battery operated pre-assembling machine for cutting rings. It's weight is only 7kg and that makes it very easy to use. It is designed for 6-42mm pipes and there is plenty of force even for stainless steel assemblies. Pressure is fully adjustable. Machine has been tested with all leading cutting ring and professional fitting solutions on the market. |
|
| The Automatic Tubesetter is an industrial assembly tool that inserts a professional fitting into the end of a flexible tube automatically. This unit uses smart relay technology and pneumatic action to achieve precise repeatable action. Saves operators hands and greatly improves throughput. |
|
The two twin-channel PME modules (MP85 and MP85DP) from HBM provide the optimum solution for monitoring press-fit and assembly operations.
Almost any commercially available transducer can be connected to the professional amplifiers which operate synchronously and in parallel. The industrial design and the standardized CANopen and Profibus DP interfaces, or digital I/Os alternatively ensure optimum connectivity to the automation environment.
Features and benefits:
Twin-channel amplifier
Comfortable integration into automation system via field bus interfaces
Intelligent signal conditioning and powerful algorithms for monitoring of the professional fitting process
Results can be saved directly in SPC format
Industrial design.
|
|
Possible applications include:
- Power electronics
- Mounted printed circuit boards
- Sensorics and Electrical Engineering
- Semiconductors and other electronic components
Possible features:
- 2D X-ray imaging
- Max. inspection area of 24" x 18"
- Detail detectability of <2µ
- Real-time detector resolution 848 x 480 Pixel
- Max. X-ray voltage of 130kV
- Maintenance-free X-ray tube
- Max. magnification of up to 460x
- Max. object size (height x diameter) 16" x 4"
- Automated X-ray inspection of BGAs, Voiding Calculation
- Easy and intuitive operation
- User-friendly image processing |
|
| ... products without technical information |
| |
|
|
see the results for the following category
