|
|
Socony Oven Conveyer Lubricant is a high performance product designed specifically for the lubrication of oven conveyor chains at temperatures up to 200 degrees celsius. It is formulated from a low viscosity oil and colloidal graphite. The oil acts as a carrier for the graphite and can penetrate between the moving parts. The oil is sufficiently volatile at the working temperature to evaporate without leaving residues that might cause sticking.
Socony Oven Conveyor Lubricant is best applied at a low temperature point to allow the fluid to penetrate between the links and pins. As the conveyor moves into a hot zone the carrier evaporates, leaving a lubricating film of graphite. The lubricant may be applied manually by brush or some form of centralised mechanical system.
|
|
OKS 100
MoS2 Powder, high degree of purity
To improve the sliding properties of machine elements. Run-in lubricant in combination with oil or grease lubrication. Prevents friction and wear. Difficult moulding processes in metal working. For integration in plastics, seals and packings.
|
|
Provides excellent lubrication
Ideal for releasing molded parts
Excellent for high temperature applications up to 500°F (260°C)
Dry, thin film won’t attract dust or dirt
Nonflammable
Does not contain silicone or chlorinated solvents
Safe on most surfaces
Meets USDA requirements for H2
|
|
|
|
|
|
Mobil EAL Arctic Series are high performance Environmental Awareness Lubricants (EAL) that are fully synthetic products designed specifically for the lubrication of refrigeration compressors and systems, using ozone-friendly HFC refrigerants. (HFCs are chlorine-free products replacing chlorine-containing refrigerants in the world market). Mobil EAL Arctic Series oils are formulated from proprietary synthesised polyol esters (POEs) and a unique additive system to provide outstanding lubricity, wear protection, chemical and thermal stability, and hydrolytic stability. They are miscible with HFC refrigerants and have well-defined viscosity/temperature/pressure relationships with widely used HFCs. The performance of the Mobil EAL Arctic Series has been well documented with HFCs in a broad range of refrigeration and air conditioning systems and are used by many major compressor and system builders around the world.
Mobil EAL Artic Series are available in ISO Viscosity grades 15 to 220. They are recommended for use in household and commercial refrigeration and air conditioning systems where HFC refrigerants are used.
|
|
Lubricants for HOLLOW GLASS:
- Soluble lubricants for shear spray and for the “delivery system”
- Neat oils for “delivery system”
- Dual-component product for the dry “delivery” coating
- Graphited varnish for mould lubrication
- Lubricants for SWABBING
- Oils for conveyor belt chains
Lubricants for FLAT GLASS:
- Neat oil for cutting
- A complete range for edge grinding
- Solutions for water treatment problems.
And also a complete range of maintenance products oil and greases “mineral and synthetic”
CONDAT always develops new products that respect the environment and that follow the latest European regulations (REACH, Biocides).
Beyond furnishing lubricants, CONDAT makes a commitment to develop a partnership with its customers and offers them a complete service (analysis of products and water, environmental advice, assistance concerning regulatory information,…) and suitable equipments (dosing units, oil separator,…).
|
|
Lubricants for PRESSURE DIE CASTING of aluminum alloys:
- release agents
- protective greases for ladles,
- piston lubricants,
- flameproof hydraulic fluids (HFC, HFD)
Lubricants for FORGING involving steel, aluminum, yellow metals and special alloys, this range includes:
- graphited oils,
- graphited aqueous solutions,
- white products,
- ceramics and coatings,
- solid lubricants.
Products for HEAT TREATMENT developed to ensure better cooling cycle control:
- Tempering oils
- Polymers
- Monitoring of products in service and on-site cooling capacity measurement.
|
|
|
|
|
|
The Humble Hydraulic H Series oils are quality anti-wear hydraulic oils designed to meet the requirements of most fluid power systems. They exhibit good anti-wear properties that help reduce the wear rates in gear, vane and piston pumps. They also possess a high level of resistance to oxidation and thermal degradation that helps control the formation of system deposits. The Humble Hydraulic H line also has good water separation properties, rust and corrosion prevention, and foam resistance. They are formulated with high quality base oils and a performance additive system.
Features and Benefits
The Humble Hydraulic H Series oils provide good anti-wear protection reducing wear in pumps and actuators in open or closed-loop systems. Their high resistance to oxidation and thermal degradation helps reduce the formation of deposits and varnish. The Humble Hydraulic H Series offers the following benefits:
Good anti-wear protection improves pump life
High resistance to oxidation eliminates deposit formation and improves oil life
Good water separation properties allow easy removal of water from systems reducing potential damage to system components
|
|
Sapphire Hi-Power is a range of lubricating fluids uniquely suitable for use in both air compressors & hydraulic systems. Incorporating the L-CO system ensures low carry over of the oil in compressor systems. This results in a dryer air stream and longer compressor lubricant life. In hydraulic systems, the premium quality ensures the fluid does not generate deposits, sludge or varnish.
Available as ISO VG 22, 32, 46, 68 and 100; all grades are approved to the following specifications:
- DIN 51506 (VBL, VCL, VDL)
- ISO/DP 6521 (DAA, DAB, DAH, DAG)
- DIN 51524 pt 2/3 (HLP, HVLP)
- AFNOR NFE 48-603 (HM, HV)
- VDMA 24318
- US STEEL 126, 127, 136
- SPERRY VICKERS M-2950-S
- DENISON TP 02100
- Temperature range -20 to +120°C
|
|
For machining operations:
- bar turning,
- turning,
- milling,
- drilling,
- boring,
- grinding,
- EDM,
- cutting / stamping
CONDAT has developed a complete product range for all metals ( steels, cast irons, aluminum, titanium...) :
- Soluble lubricants
- Neat oils
- Vanishing lubricants
- Protection products
- Degreasing agents
|
|
Parting Paste
Moistening the centerdrill with our highly heat-resistant parting paste, matched to the respective material to be processed, is important for the life of the centerdrill. The paste can be applied manually or with a spray device.
Lubrication during thread forming
The use of our lubricant is highly recommended during thread forming. It should be applied before each operation on the centertap. Our lubricant is ecologically tested according to DIN.
For further details and more information, please visit our website.
|
|
The FOODLUBE range is a comprehensive group of lubricants designed for the food & other clean industries. NSF H1 Registered as safe for incidental food contact, FOODLUBE is formulated using only FDA listed ingredients, and meets DIN V-10517, FDA Group 21 CFR 178.3570. Additionally, all FOODLUBE products are free from any GM, Soya, nut or nut derivatives; and mineral hydrocarbons.
FOODLUBE products have the superior performance you expect from ROCOL and are manufactured under strict BE EN ISO standards to ensure plant efficiencies across the site.
The comprehensive FOODLUBE range consists of industry leading lubricants covering Bearing Greases, Chain Lubricants, Gearbox Fluids, Hydraulic and Compressors Fluids along with a range of additional products covering all other lubricant applications. All backed up with the ROCOLcare premier service package supplying world class lubrication solutions for industry; FOODLUBE is the essential link in the food chain.
|
|
NSF H1 registered #129000
for use in meat and poultry plants
Conforms to USDA H1 - 1998
Meets FDA Regulation 21-CFR-178.3570
for incidental food contact
Penetrates to loosen frozen nuts and bolts
Provides excellent lubricity
Does not contain silicone
Colorless, odorless and non-toxic
Eliminates sticking, binding and squeaking
Non-staining lubricant
Safe on most surfaces
Inverta spray valve lets you spray in an upright
or inverted position
Value performance
|
|
Recognized throughout the world, the VICAFIL range is specially designed for wire, tube, bar drawing and metal rolling.
The range includes:
• VICAFIL®: the largest range of lubricants for all Wire Drawing applications in the industry
• STEELSKIN®: specific High Tech Dry lubricants range
• LUBRINOX®: specialized oil range for stainless steel applications.
• STEAGEL®: grease and paste for all applications
• CONDATUB: special range for steel tube and bar applications
• GALVASMOOTH®: range for galvanizing wires for hot dip processes
• CONDACLEAN: range of cleaners for all applications
• EXTRUGLISS®: dual purpose oil range for cold heading applications
As worldwide leader in Wire Industry, CONDAT offers you eco-friendly products (Borax free) and lubricants that fit with the most recent legislations (REACH, Biocides).
|
|
|
Ongoing research and a 90-year legacy of working with leading equipment builders help ExxonMobil Marine Lubricants develop products that continually meet customer needs. With a complete line of mineral and synthetic lubricants, we offer the products your fleet's engines and equipment need to perform reliably and operate efficiently. Our flagship product line for both two- and four-stroke diesel marine engines, Mobilgard, has been shown time and again in proof-of-performance trials. Also, we offer synthetic lubricants to help improve performance benefits and economic advantages for marine equipment operating at higher temperatures and under more stress.
|
|
KUTWELL is the trademark for a line of two high-performance 'soluble' cutting fluids for cooling and lubricating the tool and work in machining operations. The line includes one petroleum-base fluid, KUTWELL 40, and one semi-synthetic fluid, KUTWELL 82.
KUTWELL products mix readily into water to form stable emulsions. They have excellent rust-preventive properties, both are inhibited against foaming, and both are versatile products suitable for a wide range of metal cutting and grinding operations. KUTWELL products effectively remove heat from the work piece and can be applied as a stream or in mist form.
In many cases, the proper KUTWELL grade can replace straight mineral cutting oils, and a single grade may often serve all the machine tools in a plant.
|
|
|
Tuthill Vacuum & Blower Systems supplies its own proprietary lines of lubricants for blowers and vacuum pumps, to keep your blowers and vacuum pumps in top running condition.
|
|
|
|
|
|
Mobil Gas Compressor Oil is a premium quality, high performance, synthetic gas compressor lubricant based on poly-alkylene glycol. It is primarily intended for use in gas compressors for hydrocarbon and chemical gases where the crankcases and bearings operate in a gas filled atmosphere. It is particularly suitable for marine service on vessels carrying liquefied gas cargoes. It also has application in general industry where problems with oil and gas solubility issues have resulted in less than satisfactory equipment performance. Compared with conventional mineral oil, Mobil Gas Compressor Oil has a lower gas solubility and consequently resists dilution and has improved viscosity control which results in additional protection against wear, improved efficiency and reduced foaming.
Features and Benefits
Mobil Gas Compressor Oil is a special purpose synthetic product developed to reduce the problems resulting from gas dissolving in the lubricant and causing problems with wear, sealing, increased maintenance and frequent oil changes.
|
|
|
Industrial silicone lubricant prevents sticking and binding, stops friction squeaks, repels moisture. Leaves a clean, clear, non-greasy, slick, rust resistant coating. For use in areas where petroleum products are not suitable.
|
|
OKS 1000
OKS 1000
Silicone Oil
Lubricant and parting agents for plastics and elastomers. Also as damping oil. Neutral with respect to plastics, elastomers or paints. Broad temperature application range. Excellent surface wetting.Resin and acid-free. Available in viscosities of 50 to 5000 cSt (on request).
|
|
Colorless, thin film
Excellent for releasing molded parts
in high temperatures or pressures
Low odor
Nonstaining
Nonflammable
Noncorrosive
Does not contain CFCs, or chlorinated solvents
|
|
|
|
|
|
Mobil Mist Lube Series are extra high performance oils designed for the oil-fog or mist-lubrication of machine components such as slideways, bearings, gears, chains etc. They are formulated from high quality, solvent refined base stocks and a unique additive system designed for optimum reclassifying properties. They have a high resistance to oxidation and good extreme pressure and anti-wear properties. The products have enhanced surface wetting capabilities and they reclassify (or agglomerate) readily from a mist to a liquid when the mist is subjected to extreme turbulence or is impinged onto a surface at high velocity. This allows a lubricating film to form on bearings and gears and prevents stray mist from escaping through narrow apertures into the atmosphere.
The four viscosity grades in the Mobil Mist Lube Series, ranging from ISO VG 32 to 460, allow the machine designer to choose the product most suitable for proper mist lubrication of machine elements. The heavier grades are used on ways, gears, and slow-speed, heavily loaded bearings, while the lower viscosity grades are used in high-speed bearings.
|
|
- Tufgear Universal: Suitable for lubricating all open gears - regardless of size. Water resistant with exceptional load carrying capacity. Operating temperature range -40ºC to +120ºC
- Tufgear Spray: High performance open gear lubricant in aerosol form for all open gears. Water repellent thin tenacious film which resists high loads and throw off. Temperature Range -10ºC to 100ºC
- Tuflube All Weather: Extremely adhesive lubricant with excellent water displacing properties which provides good corrosion protection and long term lubrication. Temperature Range -30ºC to 70ºC
|
|
Leader of the specialities of lubrication, FUCHS LUBRICATING fulfills the requirements imposed by Hardening, thanks to a specific range including/understanding:
Oils froides*, semi-chaudes* and chaudes*,
Oils for vacuum ovens *,
Aqueous fluids at polymeric base, for case or mass Hardening,
... and a personalized analytical follow-up of its fluids
in service to guarantee performances and longevity.
*: at speed of standard or accelerated cooling
|
|
|
FUCHS LUBRICANT proposes a broad hydraulic oils range of high performance additivées antioxidants, antiusure, anti-corrosive and improving of index of viscosity for the hydraulic equipment of systems of all types (machine tools, presses of cutting-stamping, press for injection plastic,...).
|
|
Lubricating 100% synthetic for the most various applications. It has an exceptional adherence, a pressure resistance high and lubricates in a broad beach of temperatures (- 20°C with +120°C uninterrupted).
Fight effectively against corrosion and resists water projections.
Net volume: 500 ml
|
|
|
Reduced the varnish deposits of oxidation and is used in a broad beach of temperature (of -35°C with +175°C). Synthetic oil for compressors and vacuum pumps, in which can occur a fortuitous contact between the foodstuffs and the oil contained in the drawing-off air. Compatible with the joints, the trimmings, the pipes and the elements of the pneumatic system or the circuit of air. Rank 68: also recommended to lubricate the A.F.C. chains.
|
|
Description
High performance mineral oil-based micro-emulsions for extended tool life and superb surface finish.
Unique biological concept delivers long term stability without the need for tank side biocides.
Blaser’s best for all around performance, stability, safety and ease of use.
Available for hard or soft water in low to non-foaming varieties.
All versions available with or without chlorinated additives.
Applications/Properties
Universal for machining & grinding of ferrous and non-ferrous materials.
Well suited for heavy duty and difficult operations such as deep hole drilling, broaching, reaming, creep-feed grinding & high speed machining.
|
|
All cooling lubricants for feeder blades have following properties:
- long feeder blade life
- no attack on aluminium
- no gumming or resinification
- excellent cooling effect
- very good resistance to hard water
- highly economical consumption
|
|
Description
Synthetic, water-miscible, mineral oil free cutting fluid for grinding. Good
rinsing behaviour keeps grinding wheels and machines clean.
Efficient corrosion protection even at low concentrations, good settling
behavior.
Liquid tool® consists of a unique mix of state-of-the-art products (cutting oils and cutting fluids) application and consulting know-how laboratory, customer and training services
|
|
|
|
