|
|
Description
Vegetable oil-based micro emulsion for superior performance.
Blaser’s best for the most difficult operations and surface tolerance requirements.
«If Vasco cannot do it, no water miscible cutting fluid can.»
Available with or without chlorinated or sulfurized additives.
Applications/Properties
All ferrous and non-ferrous materials.
Ideally suited for the most demanding machining & grinding applications.
|
|
|
|
|
|
LUBRICANTS and HACCP
The industrialists of the agro-alimentary sector are confronted with two requirements: to ensure the profitability of their exploitation by using high equipment the output and to promote a policy of quality and environment constantly improved.
They should solve the delicate problem of the lubrication of their machines, important factor of the productivity. To meet these needs, IGOL INDUSTRY proposes lubricating compositions designed according to a protocol meeting the standard ISO 9001, specifically developed for the agro-alimentary sector. These lubricants are produced in a specific workshop, on a site IGOL also certified ISO 14001 and ECO-AUDIT.
Hydraulic oils, gears, compressors, slides, fluids of heat transfer, grease, the fluids of this range developed since 1992 are preparations formulated with components in conformity with the guide workbench by the CNERNA (National Center of Coordination of the Studies and Recherches on the Nutrition and the Food) while answering the provisions into force defined by Food and Dry Administration (FDA): payment 21 CFR 178. 3570 (lubricants being able to come into accidental contact with foodstuffs the United States - H1 level).
|
|
|
GTP600 is a high purity graphite paste which outperforms any conventional lubricant. When tightening bolts and nuts, using GTP600 will ensure low and uniform friction conditions, making it possible to utilize the bolts’ full capacity.
|
|
|
Provide a smooth surface of high-grade graphite. Adheres to metal for long lasting lubrication under extreme pressure, temperature, and weather. Excellent where dusty or dirty environments make oil lubricants ineffective.
|
|
The ALL WAY SUPER DEGRIPPANT is a mixture of hydrocarbons and light oils, with antirust agents.
It is especially designed to ensure the releasing of all parts or sets.
|
|
Molykote® compressor and pump fluids are formulated to meet or exceed the performance of comparable
OEM fill products. With the exception of L-3232 and L-3246, these fluids are all compatible with
mineral oils and systems designed for mineral oil lubrication. Dow Corning can perform oil analysis to
ensure that the right product is used for each application and that product life is maximized.
|
|
Cutting Fluid
Ref: HDC
Industrial grade metal working oil
Powerful lubricant and friction reducer
Allows high speed punching
Extends tool life by reducing the risk of pulling
|
|
All the same whether Schrupparbeiten or precisely within the purifying simple range a dielectric must become at any time fair the very special requirements. The high speed dielectrics oelheld of the GmbH are developed and with erosion-intensifying and wear reducing additives as well as ageing inhibiters additiviert for the employment for funkenerosiven treatment.
Products of the IonoPlus row are produced contrary to conventional petroleum products by a special Blendingverfahren. Of oelheld patented dielectrics are enriched with satellite electrodes.
Hahezu all manufacturers of funkenerosiver plants recommend expressly oelheld quality. The dielectrics possess besste dielectric strength and are almost odorless.
|
|
Exxon Superflo High Mileage 5W-30, 10W-30, and 10W-40, are high quality engine oils that combine a seal conditioner to help prevent leaks in high-mileage engines - coupled with excellent anti-wear protection and special friction-reducing technology.
Features and Benefits
Exxon Superflo High Mileage 5W-30, 10W-30, and 10W-40 provides vital protection for high-mileage engines (typically engines with over 75,000 miles) through a combination of a seal conditioner, high quality base oils, and other performance additives. Exxon Superflo High Mileage 5W-30, 10W-30, and 10W-40 helps prevent leaks in older engines and protects engines from build up of harmful deposits, sludge and varnish. The 5W-30 and 10W-30 grades are specially formulated as ILSAC "energy conserving" to provide fuel savings benefits.
|
|
ALCO 250 is a high pressure white grease.
Grease with additives which has an excellent water resistance. NLGI 2
ALCO 250 has a high drop point .
It can be used from -50°C to 150°C
Has an important lubricant power.
Applications:
- High-speed movements, including under heavy loads
- Very low temperature lubrication
- Clean lubrication.
|
|
|
|
|
|
Molykote® synthetic oils are produced
through chemical synthesis to meet
targeted performance specifications and
to minimize impurities. Synthetic oils
are formulated with new generation
performance-enhancing additives.
Molykote mineral oils are produced in
a series of proprietary hydroprocessing
steps, which ensures that they are nearly
free of contaminants. Synthetic blends are
comprised of synthetic and hydroprocessed
mineral oil base stocks.
All oils in this section are available in pails
and drums.
Molykote® gearbox lubricants help prevent wear and process interruptions in power transmission
systems and components. Compared to conventional oils they also offer greater resistance to
oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils
maximize fill intervals and maintain viscosity characteristics at wide temperature ranges. Molykote
gearbox oils meet AGMA 9005-E02. In addition to AGMA, Molykote L-21XX series gearbox oils also
meet DIN 51 517 Part 3, US Steel 224, Flender, Cincinnati Machine, David Brown SL.53.101.
|
|
Réducteur Biodégradable F 10 is a a new generation penetrating fluid with multi uses properties: Penetrating fluid, deoxidizing, anti-humidity, lubricating agent, degreaser, tar remover, boiler cleansing compound, diluting agent for inks, anti-resin, coating and mastic cleaner.
Biodegradable, it is free from VOC (Volatile organic compounds) and non flammable.
Moreover, it is compatible with the majority of supports.
|
|
Molykote® dispersions are finely dispersed
solids or other lubricants suspended in
lubricating fluids. They are preferred where
it is necessary to apply solid lubricants in
liquid form to units in operation or to
otherwise inaccessible points. Some
dispersions serve as antiwear and extreme
pressure additives for lubricating oils like
gear and engine oils.
|
|
Penetrating Fluid
Ref: DGT400
Grease prevents squeaking in mechanical assemblies, e.g. locks, hinges, etc
Ideal for breakdown and maintenance services
Penetrates and lubricates mechanical parts
Produces a highly water resistant film, providing long term corrosion protection
|
|
As wasserlöslisches cutting oil we recommend AquaTec 7560.
AquaTec 7560 offers extremely high stability also without use of additives.
AquaTec 7560 ensures small care expenditure
AquaTec 7560 does not have foam problems
AquaTec 7560 is universally applicable on individual machines and central plants.
AquaTec 7560 carries a very high machine cleaning effect out
AquaTec 7560 has small air pollution
AquaTec 7560 does not know problems with corrosions
AquaTec 7560 offers very high tool tools
AquaTec 7560 reached better surfaces
|
|
|
The products of the SulFol LC-row developed from solventrafinierten basic oils are characterized by outstanding cool, net and lubricating actions. This leads to a substantial improvement of the surface quality and the tool service lives. Due to the special Hochleistungsadditivierung all lubricants of the SulFol LC-row possess a very good resistance to aging and an optimal viscosity temperature behavior.
|
|
The CUTTING OIL ENTIERE is a cutting fluid, containing paraffinic mineral oils, developed for the current operations in machining such boring, milling, turning and undercutting.
General-purpose product, it can be used on non-ferrous metals, mild steels, medium steels and the cast iron.
|
|
|
Also with these lubricants we remain naturally for our mark concept "humanly Technology - faithful for humans, nature and machine". All products of the SulFol LC-row are, almost aromatic-free free from chlorine and oil mist-poor. Test us!
|
|
Our shaping oils from the rows dia.-press and dia. CUT are chlorine and heavy metal-free high speed lubricants for punching and shaping processes of each degree of difficulty.
Selected basis oils and additives form mechanically and thermally extremely sturdy lubrication films with high printing pressure for optimal flow of material and small wear of tools.
|
|
|
The particularly developed cutting oil from the SulFol LC-row is particularly for applications in the range of the machine cutting with geometrically defined cut the optimal solution and by their Additivierung on the most current conditions of the cutting oil technology.
|
|
|
The portable insulating oil tester DPA 75 measures the electric breakdown strength of insulating liquids.
|
|
Loosens Frozen Metal Parts!
An industry proven penetrating oil that has no equal. Quickly loosens
rusted nuts and bolts - frees frozen shafts, pulleys, etc. Penetrates to 1
millionth inch spaces, dissolves rust, lubricates, cleans and prevents rust.
Displaces moisture. The oil that creeps. Used by 480 of the Fortune
500 companies!
|
|
Nonflammable CO2 propellant
Displaces moisture
High flash point of 175° F (79° C)
More usable contents per can
Protects against corrosion
Loosens rusted or frozen parts
Excellent protective coating for power/hand tools
Does not contain CFCs, chlorinated solvents or
silicones
Authorized by the USDA for use in federally
inspected meat and poultry plants
Nonconductive
Safe on fabric, plastic, rubber, paint and other finishes
Plant Engineering 1995 Product of the Year
Inverta Spray Valve lets you spray in all directions
|
|
Graphited Penetrating Oil!
Oils and solvents dissolve rust and grease, carry graphite into
infinitely small places for long lasting lubrication.
|
|
Loosens Frozen Metal Parts plus Silicone!
Kroil penetrating oil plus silicone for faster penetration,
lubrication, water displacement, and rust prevention.
|
|
|
High performance, flexibility, economy and trouble-free processes, these are priorities in all modern forming operations. Rhenus brand lubricating oils guarantee a long service life, trouble-free process and minimal use of lubricant. The elimination of pickling stages and the saving of phosphating without loss of quality makes a significant contribution to the reduction of process costs. Rhenus special oils for forming are available for a wide range of applications from steel through aluminium to copper. Likewise for corrosion protection on machine, workpiece and tool. Environmental compatibility and work safety are guaranteed by low-aromatic compound oils, absence of chlorine and preferred use of sustainable raw materials.
|
|
Our whole oils, formulated on highly refined mineral basis, bases synthetic or bases vegetable, integrate a rigorous selection of additives (extreme-pressure, antiusure, antioxydant, fog).
They allow all the operations of machining: correction, turning, milling, drilling, boring, stitching,..., on all types of metals: cast iron, steel, titanium, nickel, aluminum, copper,...
|
|
PLANTOCUT 7F a biodegradable cutting oil, without chlorine. It is appropriate in particular for the operations of machining with frictions tools parts very
important by reducing the wear of the cutting tools. PLANTOCUT 7 F are especially recommended for the operations of tapping and drilling in
outside.
Compatible all metals.
Ecological engine not diffusing dansl' atmosphere.
|
|
|
Fuchs Lubrifiant France proposes a lubricants range specific to the operations of cold deformation of metals: cutting, stamping, shaping, swifting, hydrospinning, striking...
|
|
|
|
