Lubricants

Viscosity: 0.000016, 0.000023 m²/s
Flash point: 180, 200 °C

Machining of steels ranging as far as extra-high-carbon, special and refractory steels. Very good antiwear and extreme pressure performances: - increases the tool lifetime, - prevents ridging, - very good surface finish, This ...

Operating temperature: -3 °C - 240 °C

... ferrous metals, including titanium and yellow metals. VALONA MS 5016 BIO can be used in both traditional jet lubrication and Minimum Quantity Lubrication (MQL) systems. VALONA MS 7022 BIO is a biosourced ...

Pour point: -27, -24, -18 °C
Flash point: 286, 292, 300 °C

... mineral lubricants, specially developed to improve anti-wear and corrosion protection of your highly valued piston aviation engine. These oils already contain an anti-wear additive similar to Textron Lycoming LW 16702. New ...

Operating temperature: -30 °C - 120 °C

SKF LGMT 2 is mineral oil based, lithium soap thickened grease with excellent thermal stability within its operating temperature range. This premium quality, general purpose grease is suitable for a wide range of industrial and automotive ...

Operating temperature: -30 °C - 120 °C

SKF LGMT 3 is mineral oil based, lithium soap thickened grease. This premium quality, general purpose grease is suitable for a wide range of industrial and automotive applications requiring stiff grease. • Excellent rust inhibiting ...

Operating temperature: -20 °C - 110 °C

SKF LGEP 2 is mineral oil based, lithium soap thickened grease with extreme pressure additives. This grease provides good lubrication in general applications subjected to harsh conditions and vibrations. • Excellent ...

Pour point: -36 °C

Cutting-edge technology lubricant developed for Factory Teams but also for high performance stock motorcycles, designed to offer maximum power output and better clutch grip control with outstanding engine and gearbox ...

Pour point: -42 °C
Flash point: 224 °C

All racing gasoline or Diesel engines, naturally aspirated, turbocharged or supercharged fitted withinjection (direct/indirect) or carburetted.For tuned engines and high performance cars operating over a wide range of rpm and temperatures, ...

Pour point: -36 °C
Flash point: 234 °C

All racing gasoline or Diesel engines, naturally aspirated, turbocharged or supercharged fitted with injection (direct/indirect) or carburetted.For tuned engines and high performance cars operating over a wide range of rpm and temperatures, ...

Flash point: 260 °C

This vacuum pump oil has excellent viscosity characteristics. Its good chemical resistance, low vapor pressure as well as its better stability when pumping oxidants such as acid and alkaline vapors, makes it superior compared to standard ...

Viscosity: 0.000011 m²/s

CK-50 is specially formulated for honing cast iron automotive and truck engine blocks and should not be used to hone other materials. It is petroleum based, containing high performance lubricity agents in combination with both sulfur ...

Viscosity: 0.000025 m²/s

KG3X is a non-hazardous, ecologically responsible, unregulated honing oil. Like MAN-852, it is additive free and is composed entirely of surface active lubricity agents, but is formulated to a lower viscosity. Because this product does ...

Viscosity: 0.000011 m²/s

LP8X is a chlorine-free version of MAN-845 honing oil. LP8X is petroleum based and contains a highly effective sulfur additive in combination with lubricity agents to produce slightly higher honing performance than MAN-845 in automotive ...

Operating temperature: -20 °C - 130 °C

Operating temperature: -20 °C - 150 °C
Flash point: 0 °C

Operating temperature: -20 °C - 180 °C
Flash point: 0 °C

WD-40 Specialist® Bike Wet Chain Lube is a high-performance lubricant specifically formulated for muddy & extreme conditions. The Wet Chain Lube provides a durable coating that helps repel water and mud, and helps protect ...

Operating temperature: 650 °F
Flash point: 180 °C

... rust and corrosion. Heavy-Duty Grease is an excellent choice for maintenance of farm and construction equipment, and for lubricating machinery in damp conditions. Formulated with calcium sulfonate (OBCS) technology, it ...

Operating temperature: 0 °F - 300 °F
Flash point: 30 °C

... applications that require heavy-duty lubrication and leaves behind a rust-inhibiting barrier for protection against corrosion. This long-lasting formula won't melt, freeze, or run in harsh weather conditions. Also great ...

Groeneveld-BEKA offers a variety of grease to guarantee trouble-free operations and proper lubrication of equipment. GreenLube grease is designed for all of our lubrication products. GreenLube greases: ...

Operating temperature: -50 °C - 180 °C

... , penetrating and water displacing lubricant. Ideal for use on chains, bearings, slides and similar mechanisms operating in food, pharmaceutical and other clean environments. It is an excellent all round lubricating ...

Operating temperature: -20 °C - 120 °C

... have a blue dye for visibility and excellent stability resulting in extended relubrication intervals and a reduction in lubricant usage Supplied in viscosity grades: ISO VG 150, 220, 320, 460 & 680. The majority ...

Operating temperature: -56 °C - 120 °C

... component life and improving reliability. AEROSPEC 100 low temperature aerospace grease is specifically designed for the lubrication of rotary actuators and compact high performance gear boxes operating at low temperatures. AEROSPEC ...

Operating temperature: -50 °C - 160 °C
Viscosity: 0.00005, 0.000008 m²/s

Berutox FB 48-1 is a vibration and noise damping multi-purpose grease for long-term lubrication in the automotive and supplier industry. Berutox FB 48-1 impresses with its particularly good pumpability. Examples of ...

Operating temperature: -30 °C - 260 °C
Viscosity: 0.00033, 0.00003 m²/s

Berutox VPT 64-2 is a noise damping long-term lubricating grease designed for the food, automotive and supply industries. Due to its outstanding performance, Berutox VPT 64-2 is used in demanding applications such as ...

Operating temperature: -30 °C - 230 °C
Viscosity: 0.00021, 0.00002 m²/s

Berutox VPT 54-2 is a noise damping long-term lubricating grease for the reduction of friction and wear at high temperatures. Berutox VPT 54-2 is suitable for all approved sliding speeds in grease lubrication ...

Pour point: -6 °C
Flash point: 250 °C

... ecological characteristics, formulated with natural base components. It is formulated specifically for Minimum Quantity Lubrication systems, and it is ideal generic cutting operations. Its composition contributes ...

Operating temperature: -30 °C - 120 °C
Viscosity: 0.0001, 0.000011 m²/s

... and machine manufacturer´s instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication system. Assess the lubrication ...

Operating temperature: -30 °C - 120 °C
Viscosity: 0.00011, 0.000009 m²/s
Flash point: 3 °C

... completely. The bearing and machine manufacturer's instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun. Assess the lubrication frequency and ...

Operating temperature: -25 °C - 80 °C
Viscosity: 0.0001, 0.000009 m²/s
Flash point: 100 °C

OKS 403 is a marine grease for lubrication of machine elements subjected to water or sea water. Areas of application Lubrication of open toothing, friction and rolling bearings, threaded spindles, ...

Operating temperature: -55 °C - 204 °C
Pour point: 260 °C

Food silicone grease. Silicone fluid grease and synthetic thickener. 20 kg, 50 kg, 180 kg. Available in the following NLGI (Consistency Grade) grades: 000, 00, 0, 1, 2, 3. - Highly resistant and highly mechanically stable. - It has ...

Operating temperature: -40 °C - 140 °C
Pour point: 179 °C

Biodegradable grease specially designed for outdoor work. 400 grams, 1 kg, 5 kg, 18 kg, 45 kg, 185 kg and box of 28 cartridges. Available in the following NLGI (Consistency Grade) grades: 000, 00, 0, 1, 2, 3. - Excellent anti-corrosion ...

Operating temperature: -40 °C - 180 °C
Pour point: 260 °C

Calcium sulphonate grease with high base oil viscosity, high dropping point and adhesiveness. With excellent EP load carrying capacity and water resistance. 400 grams, 1 kg, 5 kg, 18 kg, 45 kg, 185 kg and box of 28 cartridges. Available ...

Viscosity: 0.000941 m²/s

... petroleum solvent. Prevents sticking and seizing up on the press tools. Excellent tool protection. Ensures good lubrication under high pressure.

Viscosity: 0.000046 m²/s

COMPRESSOR VRH is a semi-synthetic lubricant for air compressors, vane compressors and screw compressors. This product stands for keeping your compressors running at peak performance, minimizing downtime and lowering ...

Operating temperature: -20 °C - 150 °C

Thin silicon oil, suitable for applications where attachment between various substances is to be avoided, and sliding is required. Benefits Good thermal stability. Insulating properties. Very low friction coefficient. ...

ML-7000 green environmental protection pure vegetable trace lubricating oil, completely soluble in cold water. Product Benefits: Eliminate coolant: no oil mist, improving air quality Eliminate coolant maintenance: ...

Operating temperature: 320 °C

200 ltrs. drum HTF mineral oil for heat transfer that can be used in any type installations with maximum outlet temperature of 305 °C boiler wall and maximum temperature in the boiler of 320 °C Pirobloc HTF-MINERAL is a fluid special ...

Operating temperature: -6 °C - 275 °C

200 ltrs. drum HTF synthetic oil for heat transfer that can be used in any type installations with maximum outlet temperature of 275 °C boiler wall. Pirobloc HTF-HIGH FLASHPOINT is a fluid for heat transmission specially formulated ...

Operating temperature: -10 °C - 315 °C
Viscosity: 0.3 m²/s

Drum of 200 liters of synthetic thermal oil for use in indirect heat processes (-10ºC to 315ºC). Pirobloc HTF-ULTRACLEAN is a synthetic thermal oil for cleaning of systems of heat transfer in liquid state. It can be used with working ...

Operating temperature: -45 °C - 232 °C
Flash point: 220 °C

... patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant ...

Operating temperature: -34 °C - 246 °C
Flash point: 260 °C

... for use in manufacturing facilities where thermal stability, optimal performance and extended service life are critical lubricant requirements. Super Lube® High Temperature E.P. Grease is resistant to detergents and ...

Operating temperature: -43 °C - 232 °C
Flash point: 220 °C

... Grease. This product is dielectric, food grade and clean. Super Lube® Railroad Grease is an NSF registered Food Grade lubricant, rated H1 for incidental food contact and meets USDA 1998 H1 guidelines. Super Lube® ...

... important as the lubricant itself, as well as the whole implemented mixing / distribution / spraying system. The optimization of the whole system is indissociable and allows in short / middle term : a reduction ...

... directly on the scoops, at the first contact point of the gob with the delivery system. The lubrication of these systems can be set up with different types of lubricants, wether neat, emulsifiable into ...

First, these lubricants act as a release agent, preventing the hot glass from sticking to the mould. In order to develop this product range, SOGELUB® initiated a technical survey about the needs and expectations of the ...

Sewing machine oilArt.No.: WF-48WF 48 is a special oil which is used to lubricate and preserve sewing machine parts, e.g. slides, spindle joints, etc. Excellent penetration when applied.The article is available in the following package ...

... permanently lubricating, high-performance grease for all moving parts, sliding parts and friction surfaces. A perfect adhesive lubrication for chains, gears, hinges, guide rails and ball bearings...The article is available ...

Operating temperature: -40 °C - 200 °C

Silicone grease with PTFE for changing temperature loads, e.g. easier start-up at low temperatures and continual pressure in the range of -40°C to +200°C. Suitable for metal, plastic, rubber compounds. NSF Class H1 certified. Neutral ...

Viscosity: 0.000129, 0.000019 m²/s
Pour point: -46 °C
Flash point: 243 °C

IGOL RACE FACTORY 0101 10W-50 is a 100% Synthetic Ester and PAO based engine lubricant, specially formulated for powerful, sporty, high speed engines. Improves power by reducing friction and wear. Suitable for petrol ...

Viscosity: 0.000018 m²/s
Pour point: -49 °C
Flash point: 226 °C

100 % synthetic oil. High-performance multigrade lubricant formulated from PAO and ESTER synthetic base oils, strong protection against wear and reduction of internal friction. Suitable for modern petrol or Diesel, natural-aspiration, ...

Viscosity: 0.000164, 0.000025 m²/s
Pour point: -39 °C
Flash point: 229 °C

A high-performance, multigrade lubricant, specially designed for powerful and sporty engines driven hard at high speeds and torques both on the road and on racetracks. An oil based totally on esters and PAO, which naturally ...

Pour point: -27, -42, -18, -24 °C
Flash point: 178 °C - 232 °C

Lubrication and hydraulic oils with additives to improve the ageing and oxidation stability. Good wear protection, demulsifying (good water seperation), good air release properties, zinc-containing AW/ EP additive ...

Pour point: -45, -48, -36 °C
Flash point: 180, 186, 178, 240 °C

Hydraulic and lubricating oils (machine oils) with a high viscosity index and additives to improve ageing stability, corrosion protection and wear protection. The products of the RENOLIN B HVI range are HVLP hydraulic ...

Operating temperature: 40, 15, 100 °C
Pour point: -36, -57, -48 °C
Flash point: 118, 214, 154 °C

Hydraulic and lubricating oils with extremely high viscosity index as well as outstanding cleaning properties and sludge carrying capacity. HVLPD according to DIN 51502 together with DIN 51524-HVLPD ISO 6743-4: ...

Stainless steel maintenance oil Ready-to-use, pure protection and care oil for stainless steel, aluminium and non-ferrous metals. It leaves a slightly gleaming film on the surfaces that protects from fresh contamination. Subsequent ...

Operating temperature: 20 °C - 25 °C

High-Performance Anti-Rust Oil provides effective long-term corrosion protection, efficiently protecting machine parts and metals from environmental impacts, such as water or air, during machining processes and storage. Reliable long-term ...

Operating temperature: 150 °C

... consumer goods. Wherever food products might get into occasional or technically unavoidable contact with lubricants in foodstuffs production, only lubricants that have been certified by the NSF under ...

Semi-synthetic cutting fluid for cutting and rectification operations on all kinds of metals (steel, copper, aluminum, stainless steel, etc.). This cutting fluid provides a significant extension of the life time of cutting tools and ...

Short-term corrosion inhibitor. Indoor protection up to 6 months. Multipurpose corrosion inhibitor with water repellant and lubricating properties. Forms a thin, almost invisible and long-lasting protective film against ...

Multipurpose marine lubricant and corrosion inhibitor Multipurpose marine lubricant and corrosion inhibitor. Paraffinic oil and a multiple organic inhibitor system that prevents rust and corrosion ...

Operating temperature: -40 °C - 1,400 °C

High compression resistant, metal-free assembly paste Excellent corrosion protection Salt water resistant Can also be used for ABS systems

Operating temperature: -30 °C - 250 °C

Highly resilient, specialised lubricant with excellent adhering characteristics Very well suited for high compression loads For chains, cables, rollers, bolts, bearings, etc. Does not leach!

Operating temperature: -30 °C - 250 °C

... slide rails, etc. Excellent resistance to pressure, salt water and spray, weak acids and alkalis High emergency running lubrication characteristics