|
|
|
Molykote® chain lubricants help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
|
|
Synthetic oil with modern EP-additives and anti-oxidants for high temperatures. APPLICATION: Chain lubrication up to 250 °C. Branches: Chemical industry, foundries, breweries, in wood, textile, automobile, chip-board, rubber, glass, insulating material and metal processing industries. Machines: Drying and shrinking ovens, paint shops, coating and conveyor systems, stenter frames and double belt presses.
Advantages:
* Excellent wear protection with low friction rates
* Adherent additives avoid drop-off and spin-off
* Outstanding creeping and penetrating properties
* Chemical stable and ageing resistant
* No lacquers; evaporates at high temperatures with nearly no residues
* Excellent corrosion protection
|
|
Adhesive Chain Lubricant
Ref: ACL400
Highly tenacious
Excellent resistance to water and high temperatures
Good mechanical stability
Good penetration at low temperatures
|
|
OKS 340
Chain Protector, strongly adhesive
Synthetic lubricant for machine elements subjected to high pressure or corrosive influences. Extremely high creep capacity. Highly adhesive and resistant to throwing off. Excellent wear protection. O-ring-neu-tral. Solvent free. For fast-running chains.
|
|
|
|
|
|
- Chain and Drive Spray: For the lubrication of chain and drive systems not fitted with automatic lubrication systems. Temperature range -30°C to +150°C.
- Chain and Drive Fluid: A high performance lubricant designed for the convenient effective lubrication of roller drives and conveyor chains especially those fitted with automatic lubrication systems. -15°C to 120°C
- Chain guard Hi Load Spray: Contains Molybdenum disulphide for the lubrication and protection of chain and drive systems operating under high load conditions. Temperature Range -30°C to 180°C
- Chain Guard 230: Wet film lubricant for use on oil lubricated conveyor chains subjected to continuous high temperatures. Temperature Range 10°C to 230°C.
- Chain Guard 280: A long life high temperature chain lubricant specially formulated for the lubrication of conveyor chains and bearings operating at temperatures up to 280°C.
- Chain Guard 550: High temperature chain lubricants for use where product contamination cannot be tolerated, in chemically hostile environments and at temperatures too high for wet chain lubrication. Dry film up to 550°C
|
|
Socony Oven Conveyer Lubricant is a high performance product designed specifically for the lubrication of oven conveyor chains at temperatures up to 200 degrees celsius. It is formulated from a low viscosity oil and colloidal graphite. The oil acts as a carrier for the graphite and can penetrate between the moving parts. The oil is sufficiently volatile at the working temperature to evaporate without leaving residues that might cause sticking.
Socony Oven Conveyor Lubricant is best applied at a low temperature point to allow the fluid to penetrate between the links and pins. As the conveyor moves into a hot zone the carrier evaporates, leaving a lubricating film of graphite. The lubricant may be applied manually by brush or some form of centralised mechanical system.
|
|
Lubricating 100% synthetic for the most various applications. It has an exceptional adherence, a pressure resistance high and lubricates in a broad beach of temperatures (- 20°C with +120°C uninterrupted).
Fight effectively against corrosion and resists water projections.
Net volume: 500 ml
|
|
| ... products without technical information |
| |
Chainflex® are the special cables for Energy Chain Systems® – tested, tested, tested and tested.
As a manufacturer of Energy Chains® and special Energy Chain® cables, igus® uses the possibility of testing many different types of chains and cables on a practice-oriented basis At the company-own technical training center in Cologne, numerous series of tests are carried out on a parallel basis under the most difficult conditions. At the present time, there are more than 35 test setups with their test results being summarized in databases. This extensive, current data pool provides precise, reliable information on the actual service life and is also the basis of new product developments at the company. The test data for Energy Chains® and cables, but also for ready-made systems, are, however, described in such detailed form that igus® confirms a functional guarantee for its Energy Chain Systems®.
|
|
MAN-MADE MACHINES
LAPP MULLER is the partner of robots, gantries, machine tools manufacturer for the design and the production of power lines, power/control, servomotors and safety control systems.
- ROBOCABLES F3
Miniaturized cable for drag chain
- ROBOCABLES F1X
Miniaturized cable for very long and high speed drag chain
- ROBOCABLES UL
All our range of ROBOCABLES with UL homologation
- ROBOCABLES BUS
Cables answering to all existing bus protocols
- ROBOCABLES CLEAN ROOM
Complete range of ROBOCABLESÒ for use in Clean Rooms, with DIN ISO 14644-1 certificate
- HYBRID UMBILICALS
Composite robotics cables interface with electric hydraulic pneumatic and optic
- HARNESS CABLES
- ROBOTS EQUIPMENTS AND SERVICES
These companies trust us :
STAUBLI, COMAU, KUKA, ABB, PEUGEOT CITROEN, NELSON, SAMSUNG, FIAT, DURR, MICHELIN, ROBOTEC….
|
|
- Very great flexibility. For intensive uses.
- Normal Tension: 300/500V.
- Tension of test: 3000 V. -5°C with +70°C.
- Radius of curvature without shielding ø cable x10.
- Radius of curvature with shielding ø cable x12.
- Press-packing-sock for chain cable carrier to consult us.
|
|
Trailing cables for Cable Chains 300 volt ~ 300/500 volt ~ 600volt ~ 0.6/1 kV
PVC Control and Power Cables
Low capacitance zero halogen PUR Electronics Cables
PVC/PUR Control Cables
PE/PUR power and servo single conductors 0,6/1 kV
TPE-E/PUR Electronics and Control Cables
TPE-E/PUR servo single conductors 0,6/1 kV
|
|
Our vertical range comprises 5 products:
LinkLift 50 - LinkLift 50 R - LinkLift 80 - LinkLift 100 - LinkLift 100 R
LinkLift 50R * and LinkLift 100R * are renforced versions of the LinkLift. In these cases the chain is equipped with 2 additional rollers per link, whilst the drive housing has 2 additional pinions allowing the dynamic capacity to double.
|
|
Chainlift was designed for lifting short travel, table type lifts.
The basic principle is identical - the chain is stored horizontally and forms a rigid pushing bar as it is driven through the drive housing, thus applying thrust under a platform.
The drive is generated by the rotation of pinions on rollers, forcing the links to lock and move through the housing.
|
|
|
|
|
|
Reproducibility, specificity and speed - these are the requirements for PCR in any application. The Mastecycler pro is unparalleled in its ability to fulfill these requirements:
The proprietary vapo.protect™ technology* reduces evaporation to a minimum. Therefore, concentrations in your PCR master mix remain consistent leading to stable and reproducible specificity. Non-specific binding is minimized beyond importance.
The extremely high heating and cooling rates of the Mastercycler pro S give you the speed you need. Unsurpassed speed can be achieved with Eppendorf's Impulse PCR, a device driven hot-start function that increases heating rates to 8 °C/s.
Flexibility at its best Today's requirements for PCR in your lab are defined by today's research project. Tomorrow, new questions arise and new experiments must provide answers. That is why only an open and flexible system fit into today's lab.
Eppendorf's Mastercycler pro offers ultimate flexibility:
* choose from three block formats
* operate the Mastercycler pro in three different configurations
* use any plate, tube or strip you want
Fastest speeds, highest precision, easy usage and absolute reliability united in a flexible concept - that is the Mastercycler pro.
|
|
|
|
|
|
GeneAmp® PCR System 9700 is specifically designed for the amplification of nucleic acids. The GeneAmp® PCR System 9700 consists of a base module and one of many interchangeable sample block modules. The 0.5 ml GeneAmp® PCR System 9700 is designed for use with 0.5 ml reaction tubes for all of your large volume PCR applications.
- Heated lid for oil-free operation in a 60-well, 0.5 mL format
- Interchangeable sample blocks for increased flexibility
- Graphical user interface for easy, intuitive programming
- Designed for fast thermal response and exceptional uniformity
- Small footprint maximizes bench space
High Volume
Applied Biosystems designed its 60-well, 0.5 mL GeneAmp® PCR System 9700 specifically for high-sample-volume PCR applications (both DNA and RNA). The heated lid and unique GeneAmp® Thermal Isolation Frame ensure oil-free operation in the 0.5 mL format.
Flexible Block
Designed with an interchangeable sample block, the 0.5 mL GeneAmp® PCR System 9700 can easily be expanded to an 0.2 mL, 96-well format. Operating modes include block mode and 0.5 mL mode. Block mode, similar to the original DNA Thermal Cycler and DNA Thermal Cycler 480, displays the sample block temperature.The 0.5 mL mode displays the calculated sample temperature. The complete system includes the System 9700 Base Module and the 60-Well Sample Block Module; however, base and sample block modules may also be purchased separately.
|
|
Can-Eng’s Chain Conveyor Furnace Systems are ideal for conveying heavy loads with high loading densities, such as leaf and coil springs, bars, tubes, forgings, castings, lift truck forks and suspension components.
Can-Eng produces a variety of belt configurations with a combination of cross flight or mesh combinations and offer a wide variety of loading systems for different applications. Processes include ageing, tempering and sub-critical annealing.
•Ideal for conveying heavy loads with high loading density
•A variety of belt configurations with a combination fo cross flight or mesh combinations
•Suitable for temperatures up to 750°C
•Positive sprocket drive systems
Applications: Bars, Castings, Forgings, Leaf springs, Lift Truck Forks, Suspension components, Tubes
Processes: Ageing, Tempering and Sub-critical Annealing
|
|
|
This Wellman Furnace is used for continuous hardening, tempering and annealing of irregular and randomly spaced loads such as forgings, casting and fasteners.
|
|
| ... products without technical information |
| |
The Hartness Mass Flow 7100 DYNAC provides a much needed alternative to traditional high pressure accumulation systems.
The system is similar in proportion to conventional accumulation tables, but offers the unique DYNAC sensitivity to changes in product flow. The DYNAC 7100 operation creates a pressure-free, first-in/first-out environment that always ensures superior product handling.
Frequent slowdowns and micro-stops that are inherent, in even the best designed lines, can dramatically reduce throughput. DYNAC virtually eliminates the effect of these occurrences, raising productivity by providing
a constant and optimal product flow to line components.
|
|
|
|
|
|
|
The Hybrid CG design is suitable for applications to produce high pressure steam or hot water in ranges from 3,450 - 60,000 lbs/hr (3.4 mm BTU - 60 mm BTU) output from 100 up to 400 PSI. This system is designed by HBC to combine the best technologies from the "old school" of biomass combustion and the latest advanced combustion control technologies. The new HBC chain grate-type stoker system permits a wide range of biomass fuels with high ash contents to be combusted in an efficient manner with the added advantage of automatic de-ashing. This combination is particularly suitable for heating applications in lumber dry kilns, veneer log vats, veneer dryers, greenhouses, factories, schools and office buildings. This combination enables these systems to provide a flexible and reliable operation utilizing a consistent "grade" of biomass waste with moisture contents ranging from 30 - 50%. The boiler vessel is a two pass hybrid design incorporating a water tubed boiler-type water membrane and a two-pass fire tube scotch marine vessel. This vessel's advantages over standard water tube boilers include much larger steam disengagement area providing high quality steam, larger steam storage capability for quicker response to sudden steam demand and much larger thermal storage that provides fast demand response times and safer operation.
|
|
Lubricant with a high viscosity index, providing good adhesion and penetration properties.
Suitable for the lubrication of all sort of chains :
roller chains, long pitch, API type, with hollow rivets, with close links,
open mechanism...
Penetrates everywhere, even in the hard-to-reach areas, and reduces wear.
Water-repellent, it can be sprayed on humid surfaces.
This product has a good water resistance, (even salted water, hot water, and vapour); and ensures an anticorrosion protection.
It has no drop point or projection tendency.
Excellent stability, chemically inert, and neutral.
Reduces operating noises, reduces vibrations, facilitates assembly.
|
|
DELTA® DA RKC torque limiter couplings are strong and uncomplicated
overload protections for the connection of two shafts. The cosist of a
normal torque limiter Joytork® with sprocket built in and an additional
sprocket with hub. The two sprockets are connected with a double
roller chain type DIN 8187-ISO R 808 B, tight but slightly elastic.
The two ends of the chain are connected with a connecting link.
DELTA® DA RKC torque limiters are used as overload protection when
a small parallel or angle deviation of the connecting shafts cannot be
excluded.
DELTA® DA RKC torque limiters can be applied in a horizontal or
vertical position. The operating temperature are betwenn –20°C and
+250°C. Maximum temperatures of + 350°C are possible.
|
|
With this innovation Laweco can offer their customers an increased level of availability, reliability and precision at comparable conditions.
Other benefits are specified in more detail, in particular with regard to the automobile industry. The advantages worth highlighting in this area are the precise positioning accuracy and excellent loading cycle. This is combined with a high lateral stability together with a uniform, harmonious motion – the Framo® push-pull chains play an important role in this. Laweco push-pull chain lift tables are distinguished by their low maintenance and long service life.
High lifting speeds and the environmental protection due to a hydraulic oil-free system, round off the advantages for the customer.
|
|
| ... products without technical information |
| |
|
|