|
|
| ... products without technical information |
| |
Synchronous Autocoupleur with rollers
For a universal use
It réaccouple automatically in the initial position because of the resumption of synchronism all 360°
Positive coupler with rollers
Maintained transmission
There is no dissociation between kinematics and the driving force
|
|
Batch terminal
The batch terminal serves for the stacking of big packages for the laminated storage in trucks or journals and is offered as accessorie for conveyor belts,
weight categories up to 100kg per package
vertical lift up to 4 meters
dimension of the packages: from 400mm x 400mm x 400mm up to
1200mm x 1200mm x 1600mm
It is also possible to link it in manual workspaces. |
|
| ... products without technical information |
| |
OR-type External Pneumatic Roller Vibrators are characterized by the reduction or even the elimination of friction through high frequencies and high centrifugal forces. At the same time, OR Vibrators are completely insensitive to resonance.
In OR Roller Vibrators vibration is generated by a rotor which describes an eccentric movement inside a steel race. OR Roller Vibrators generate very high frequencies and centrifugal forces with low consumption as compared to the force given. For activation a 2/2-way-valve and filtered compressed air are required. OR Roller Vibrators are used on bins and hoppers to avoid bridging or rat holing, as flow aids, as well as for screening, compacting, sorting, dissolving and cleaning applications.
- Available in eight different sizes
- Maximum operating temperature: 390° F
- Oil-free operation possible
- Great acceleration
- High centrifugal force
- Low noise level
- Low air consumption
- Maintenance-free
- Standard ATEX ExII3D certified |
|
Pneumatic vibrator with Rouleau - Model DAR:
- Without maintenance.
- Noise Level ranging between 75 and 100 dBa,
- High Output.
- Seals with dust.
- Installation in an aggressive environment.
- Use until 200°C.
- Use of an compressed air with an oil mist. |
|
* for die weights above 10 tons
* low rolling friction
* hydraulic lifting
* underside can be used to move rolling bolsters
|
|
| Roller screw jack provide higher performance compared to ball screw jacks. Ideally suited to applications where a high dynamic load, high accuracy, high speed and a long life are required. |
|
The quietly running elero drives are reliable, durable and maintenance-free. They offer you the comfort of operating your roller shutters or awnings automatically by pressing a button instead of via crank drives or belts. The easily installed tubular motors can be fitted into shafts from 40 to 98 mm. They require very little space and are protected against overload by a thermal protection system.
|
|
Series A2../ARC 112 to 355, for frequency converter operation, ARB 22 to 65, heavy version for mains operation
Output range 0.4 kW to 500 kW (ARB series from 0.4 to 5.5) Acceleration torques 40 Nm to 3,000 Nm
Speeds 3,000; 1,500; 1,000; 750; 600; 500 rpm, lower speeds available on request |
|
MODEL: ELP I-25
Load Capacity: Kg 2500
Overall Length: mm 1530
Fork Length : mm 1150
Width over Fork: mm 520 / 540
Lowered Height: mm 75
Raised Height: mm 190
Wheel Type(s): Poly (std) / Nylon / Rubber
Weight: Kg 77
OPTIONS: Tandem Rollers
KEY FEATURES:
Heavy duty reinforced frame
3-position control handle
Hand & foot lowering controls
Adjustable push rods
Exit / Entry helper rollers
Articulating Axle
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Hypro roller pumps are the number one all-around choice by farmers throughout the world. The rollers (from 4 to 8, depending on the model) revolve inside the pump housing to force the spray solution through the outlet to the nozzle. Roller pumps have a low initial cost and are extremely versatile. They operate efficiently at PTO speeds of 540 and 1000 rpm and have a wide pressure range of up to 300 psi and flow rates of 2 to 74 gpm. Roller pumps are self priming and easily adapt to PTO or gas engine drives. Specific seal, roller and casting materials can be selected for compatibility with certain herbicides, pesticides, fungicides and fertilizers.
|
|
Kaller Roller Cams are used for piercing, trimming, flanging and restriking.
The Roller Cam can be mounted in both vertical and horizontal planes and contain an internal gas spring for slide return. |
|
| Laboratory roll mills are machines for testing the quality and processing characteristics of polymer material by means of discontinuous plastification, mixing or kneading. In both, plastics and rubber processing as well as processing of ceramics or special materials, roll mills by Dr. Collin are setting new standards in terms of precision and reliability. |
|
| Roller screw jack provide higher performance compared to ball screw jacks. Ideally suited to applications where a high dynamic load, high accuracy, high speed and a long life are required. |
|
More than 1000 standard tampons in more than 4 quality levels and shore hardnesses directly ex stock from TAMPOPRINT AG - the ORIGINAL. For "open" and "hermetic" tampon printing systems as well as "rotary tampon printing automations".
Special forms available at any time by request. Tests and advisory service in our application engineering department. Decades of experience at your disposal. |
|
Die cutter is designated for cutting out different patterns from hard foils, cardboard and paper. It can also be used for cutting out die stampings, from foils obtained in the vacuum forming process, by means of band punching dies placed on the plywood. It enables the so-called cardboard bending (making incisions) and perforation used in the production of foil and cardboard packing.
Two types of die cutter shafts are used: either two steel shafts or an upper shaft covered with a special material.
Using the first type of shafts, the material that is to be cut out and a separator made of a special plastic is placed on the punching die, which is a very impractical solution for large sizes of cut-out elements.
Using the second type of shafts punching die with a cut-out material is placed directly between die cutter shafts. This method increases the output of the machine. Die cutter shafts are driven by transmission belt, which enables noiseless and steady work.
We manufacture 6 models with different size of shafts:
WWP06KNA-600mm
WWP08KNA-800mm
WWP12KNA-1200mm
WWP15KNA-1500mm
WWP18KNA-1800mm
WWP25KNA-2500mm
-----------------------------------------------
zgrzewarki, wykrawarki, formierki
hf welders, rf welders, roller die cutters
Stretch ceiling machines, Zemat TG
----------------------------------------------- |
|
| The Roller Chain Coupling is a safe, compact and powerful flexible coupling, able to handle loads from 0.1 - 11,000 kW. The sprocket teeth are specially shaped and hardened, and torque is evenly apportioned. |
|
Indirectly actuated valve series with manually and mechanically actuated valves.
- Flow rate: 120 l/min
3/2-way valve
- Normally closed or normally open
4/2-way valve
- Minimal actuating force with pilot control
- Can also be used as 2/2-way valve by plugging the exhaust.
- 4 actuator types: stem, roller lever, idle return roller lever, whisker
Normally closed or normally open by turning the housing top:
VS, RS, LS
Normally closed, actuator attachment at left (number 1 on attachment above number 1 on housing)
VOS, ROS, LOS
Normally open, actuator attachment at right above number 2
This whisker valve with extremely low actuating forces is particularly well suited for units where dissimilar parts or actuating elements without precision positioning need to be sensed, or where the actuating levels are different. The whisker can be approached from any direction perpendicular to the whisker axis, or can be passed.
- Mounting bracket HV-1/8
Scope of delivery: 1 mounting bracket, 2 M5x25 socket head screws per DIN 912, 2 hex nuts and spring washers
Can be repaired with wearing parts kit
|
|
|
