|
|
|
Tap Magic Aluminum is the cutting fluid of choice for any work on aluminum (and other soft metals). Unlike some other fluids on soft metals, it will not stain the surface of the work. Precision is always excellent and the finish is always superb.
|
|
Cutting Fluid
Ref: HDC
Industrial grade metal working oil
Powerful lubricant and friction reducer
Allows high speed punching
Extends tool life by reducing the risk of pulling
|
|
As wasserlöslisches cutting oil we recommend AquaTec 7560.
AquaTec 7560 offers extremely high stability also without use of additives.
AquaTec 7560 ensures small care expenditure
AquaTec 7560 does not have foam problems
AquaTec 7560 is universally applicable on individual machines and central plants.
AquaTec 7560 carries a very high machine cleaning effect out
AquaTec 7560 has small air pollution
AquaTec 7560 does not know problems with corrosions
AquaTec 7560 offers very high tool tools
AquaTec 7560 reached better surfaces
|
|
|
The products of the SulFol LC-row developed from solventrafinierten basic oils are characterized by outstanding cool, net and lubricating actions. This leads to a substantial improvement of the surface quality and the tool service lives. Due to the special Hochleistungsadditivierung all lubricants of the SulFol LC-row possess a very good resistance to aging and an optimal viscosity temperature behavior.
|
|
The CUTTING OIL ENTIERE is a cutting fluid, containing paraffinic mineral oils, developed for the current operations in machining such boring, milling, turning and undercutting.
General-purpose product, it can be used on non-ferrous metals, mild steels, medium steels and the cast iron.
|
|
|
Also with these lubricants we remain naturally for our mark concept "humanly Technology - faithful for humans, nature and machine". All products of the SulFol LC-row are, almost aromatic-free free from chlorine and oil mist-poor. Test us!
|
|
|
The particularly developed cutting oil from the SulFol LC-row is particularly for applications in the range of the machine cutting with geometrically defined cut the optimal solution and by their Additivierung on the most current conditions of the cutting oil technology.
|
|
|
Tap Magic ProTap is our original biodegradable cutting fluid. It's totally free of all regulated chemicals, yet it's still highly effective for all cutting operations on all metals.
|
|
Tapmatic® Natural
Nontoxic and non-hazardous
Biodegradable
Does not irritate the skin, eyes or respiratory tract
Does not contain sulfur, chlorine, chlorinated solvents,
water, mineral oil or inactive fillers
Great for steel and aluminum
High performance lubricating ability eliminates galling
and seizing
Safe on all metals
|
|
The ULTRACUT range has gained recognition and respect in machine shops worldwide. ROCOL's strong philosophy of 'Continuous Improvement' has ensured that ULTRACUT has remained at the forefront of technology in terms of performance as well as safety and environmental characteristics.
- Serving machine shops worldwide
- Long life - cost efficient
- Optimum Cutting & Grinding Performance
- Safety & Environment Considerate
|
|
|
Tap Magic with EP-Xtra® is an ozone-friendly formula that provides outstanding performance on all cuts and all metals - even hard metals such as stainless steel. The proprietary additive, EP-Xtra, provides a synergistic boost in performance.
|
|
Tapmatic® Dual Action Plus #1
Made for hard to machine alloys such as stainless steel and titanium
Reduces friction and eliminates chip welding
Lowers temperature through chemically controlled evaporation
Provides ultrafine finishes and precise tolerance
Tapmatic® Dual Action Plus #2
Provides superior extreme pressure lubricity in machining aluminum and its alloys
Reduces friction and eliminates chip welding
Improves surface finish and extends tool life
Tapmatic® #1 Gold
Great for steel and aluminum
Excellent for low speed, high pressure applications
Minimizes torque increases
Does not contain chlorinated paraffins, water, solvents
or inactive fillers
Safe on all metals
|
|
ValCOOL® - A Cutting Fluid
System With Synergy
We at Valenite are continuously improving our standard ValCOOL® product line to give you total satisfaction. Our full range of cutting fluids, specialty fluids, cleaners, additives and accessories are uniquely engineered and tested to help you reap maximum efficiency in all your machining and grinding operations.
In addition, we have cutting fluids designed for any workpiece material you may be machining.
Our knowledge of both metalworking applications and cutting fluids will deliver synergy to your shop floor. No one else can do that!
Give us a call, and we'll help you select the ValCOOL® products that best match your application.
ValCOOL
Tool It, Cut It, Cool It
Valenite is the only cutting tool manufacturer to offer the complete package. The right cutting tool and cutting fluid combination for every metal removal application.
|
|
|
The extreme performance heavyweight champion for hard metals – inconel, titanium, stainless...any metal up to 45 Rockwell hardness! Virtually eliminates work hardening. Clinging action means it stays with the tool for those big, deep hole cuts and for lathe and mill work because it isn't prone to sling off.
|
|
|
This is a high-visibility, foaming action cutting fluid with the proprietary additive EP-X3® for extreme performance on the hardest metals – even those up to 45 RC. The high-visibility foam allows you to conveniently gauge application rate and fluid presence. Clinging action stays with the tool longer. Eliminates work hardening.
|
|
|
Tap Magic Formula 2 Eco-Oil is totally biodegradable and has a natural oil base that's remarkably low in odor and smoke — even on cuts that produce a lot of heat. It contains our EP-X3 additive for a synergistic boost in perfomance. Highly effective for all cuts on all metals.
|
|
|
Tap Magic Formula 1 Aqueous is a biodegradable water-based fluid that, unlike other water-based fluids, is non-corrosive. It contains our EP-X3 additive for a synergistic boost in perfomance. This fluid is highly effective for all cutting operations on all metals except magnesium.
|
|
Tapmatic® AquaCut
Water-based formula
Excellent in applications where cooling of the tool is desired
Nonflammable
Non-hazardous
Does not contain sulfur, chlorinated solvents, chlorine or oils
Safe on all metals, except magnesium
Corrosion inhibitors prevent flash rusting
Provides fine finishes
|
|
Our whole oils, formulated on highly refined mineral basis, bases synthetic or bases vegetable, integrate a rigorous selection of additives (extreme-pressure, antiusure, antioxydant, fog).
They allow all the operations of machining: correction, turning, milling, drilling, boring, stitching,..., on all types of metals: cast iron, steel, titanium, nickel, aluminum, copper,...
|
|
PLANTOCUT 7F a biodegradable cutting oil, without chlorine. It is appropriate in particular for the operations of machining with frictions tools parts very
important by reducing the wear of the cutting tools. PLANTOCUT 7 F are especially recommended for the operations of tapping and drilling in
outside.
Compatible all metals.
Ecological engine not diffusing dansl' atmosphere.
|
|
Our water-soluble oils, free from formaldehyde, are declined in the form of true emulsions, microémulsions and solutions. They were developed to satisfy the requirements of the most recent machine tools, whatever the water quality of dilution (fresh water or lasts).
Our products allow all the operations of machining: correction, turning, milling, drilling, boring, stitching,..., on all types of metals: cast iron, steel, titanium, nickel, aluminum, copper,...
|
|
ACMOS Cutting agents for the metalworking
Cutting and Machining
Low-viscosity thread-cutting agent for high-grade steel that is difficult to machine and for standard steels. Good creep properties. No resinification. Improved tool life. Good surface qualities. Also suitable for sawing, milling, drilling and reaming.
ACMOSITOL 62-07
Thread-cutting agent for steel, high-grade steel, grey cast iron, non-ferrous heavy metals and light metals. Excellent lubricating power. Also suitable for sawing, milling, drilling and reaming. Contains no chlorine.
ACMOSITOL 62-23
Thread-cutting paste for difficult machining operations, particularly thread cutting, where good adhesion of the lubricant to the tool is required. Contains no chlorine.
ACMOSITOL 62-31
Heavy-duty cutting oil for machining with high loads per unit area of the tools. Also suitable for slotting and reaming. Can be conveyed by pumps. Contains no chlorine.
ACMOSITOL 62-61
|
|
Description
- High performance mineral oil-based metalworking oils.
- Heavy duty versions available for deep hole drilling, broaching, stamping, etc.
- Available in a variety of performance formulations utilizing extreme pressure and/or polaric lubricity additives with or without chlorine.
Applications/Properties
- Universal for machining and grinding of almost all materials.
- Perfect for job-shop screw machine shops.
- Especially suited for CNC machinery including Swiss-automatic lathes.
|
|
Description
- Ultimate performance straight oils based on natural (vegetable oil) esters.
- Added level of safety from very high flash point and very low mist/vapor formation.
- Greatly reduced consumption as compared to similar viscosity mineral oils.
- Available with or without chlorinated additives.
Applications/Properties
- Universal for machining and grinding of almost all materials.
- Ideal for high productions shops machining titanium, stainless steels, high temp alloys and other difficult to machine materials.
|
|
Lubricants
Ultra® pulve (pulverisation)
Commercial name : Ultra® Pulve (pulverisation)
Packaging : 2l can
Category : Ultra® Pulve (pulverisation) - Selling unit : Unit - Characteristics : Density 20°C : 910. Viscosity 40°C : 18 cSt. Water insoluble. Colour : green - Uses : Specifically formulated for micronizing applications. - Nb : For cutting aluminium and aluminium alloys, risk of stains. Please contact us.
|
|
Sawing - Slicing
Altoline 270 DF/Centroline 215/Centroline 241 D
Centroline 610/Dissoline 100 NR
Turning - Undercutting
Centroline 100/Centroline 215/Centroline 241 D
Centroline 610/Igoline 135/Igoline 350/Igoline 677
Milling Centroline 100/Centroline 215/Centroline 241 D
Centroline 610/Igoline 135/Igoline 350/Igoline 677
UGV/TGV Centroline 215/Centroline 241 D/Centroline 610 Igoline 677
Drilling/Drilling Centroline 610/Centroline 650/Dissoline 100 NR
Igoline 135
Boring
Centroline 215/Centroline 241 D/Dissoline 100
Igoline 135
Tapping/Tapping
Centroline 215/Centroline 610/Igoline 135/Igoline 677
Cutting
Altoline 270 DF/Centroline 610/Dissoline 344 LF
Stitching
Altoline 270 DF/Centroline 610/Dissoline 344 LF
|
|
| ... products without technical information |
| |
|
|