|
|
|
|
|
|
Dow Corning® silicone compounds are grease-like lubricants containing silicone fluids and inert silica fillers. They are resistant to oxidation and thermal degradation while maintaining their properties over a wide temperature range. They are designed as release agents and may be used as O-ring assembly lubricants, non-conductors of electricity, non-curing sealants and as assembly lubricants for plastic and rubber parts.
Silicone compounds may be used for applications where they function in a dual role as both lubricant and sealant.
Molykote silicone greases contain polymeric silicone fluids as the base oil Silicone greases operate over a wide range of temperatures, even at very low temperatures
Molykote offers heavy duty silicone greases with outstanding corrosion protection (500 h salt spray test)
Silicone greases are compatible with most plastics and elastomers
Silicone greases exhibit high water resistance and thus no water wash-out
High oxidation resistance combined with low evaporation rates make silicone greases very suitable for long term lubrication
High drop point, hence no risk of melting and running-out
|
|
|
Industrial silicone lubricant prevents sticking and binding, stops friction squeaks, repels moisture. Leaves a clean, clear, non-greasy, slick, rust resistant coating. For use in areas where petroleum products are not suitable.
|
|
OKS 1000
OKS 1000
Silicone Oil
Lubricant and parting agents for plastics and elastomers. Also as damping oil. Neutral with respect to plastics, elastomers or paints. Broad temperature application range. Excellent surface wetting.Resin and acid-free. Available in viscosities of 50 to 5000 cSt (on request).
|
|
Colorless, thin film
Excellent for releasing molded parts
in high temperatures or pressures
Low odor
Nonstaining
Nonflammable
Noncorrosive
Does not contain CFCs, or chlorinated solvents
|
|
Lubricant for elastmers and plastic materials, ALCO 220 is a silicone grease for food industries (NSF registration No. 125200 / conformity with circular DGS/VS4 N°99/217 established by the
Pasteur Institute: materials used in the fixed installations of water
distribution intended for human consumption).
It is odourless, flavourless, not staining, strongly adhesive.
It is completely insoluble in water and insulating.
Applications:
- Low-speed movements, valves, taps, guides, racks, in pharmaceutical and food industries.
- Lubrication of elastomers and plastics.
- Assembly of joints.
|
|
Loosens Frozen Metal Parts plus Silicone!
Kroil penetrating oil plus silicone for faster penetration,
lubrication, water displacement, and rust prevention.
|
|
| ... products without technical information |
| |
|
|
|
|
Master Bond offers electrically conductive silicone adhesives as well as a number of specialty type systems including one part conformal coatings, special fast curing systems, higher temperature resistant specialty systems, thermal conductive systems as well as transparent silicones.
Master Bond MasterSil 155S is a two component electrically conductive silicone compound for high performance bonding and sealing. The specifically modified silver filled silicone resin after the addition of a liquid curing agent cures at ambient or more quickly at elevated temperatures to a tough, flexible, electrically conductive silicone rubber. The tightly controlled viscosity of this silicone elastomer formulation produces a smooth paste which assures complete fill-in around complicated contours in even very complex configurations and provides excellent electrical conductivity as well as superior resistance to vibration and shock after cure. It has been widely accepted for bonding and/or sealing of electronic components, electrical devices and various electro-optical systems as well for special electronic circuitry or wherever a tough, elastic electrically conductive adhesive, sealant or gasket offering superior protection against adverse environmental conditions is required. MasterSil 155S has a service temperature range of -85°F to +400°F.
|
|
General-purpose, black RTV sealant. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops. May be applied to horizontal or vertical surfaces. Waterproof and flexible. Temperature range -75ºF to 450ºF (-59°C to 232°C); resists oil, water, weather, vibration, grease, and more. Non-paintable.
KEY FEATURES
* General-purpose RTV Silicone
* Black
* Temperature range -75ºF to 450ºF (-59°C to 232°C)
* Resists aging, weathering, thermal cycling
* Use on metal, glass, wood, plastic, painted surfaces and more
|
|
Silicones are ready-to-use one component adhesives that polymerize at ambient humidity. After creation of a « skin » after 30 minutes, polymerisation continues from 24 to 48 hours for joint thickness going from 2 to 4 mm.
There are different chemical bases of silicon, acetic bases and neutral bases (methoxy, alkoxy...). They present good adhesion on ali supports and insure high performance in most applications (mechanical, electronic, electric...). Silicones have excellent resistance to Chemicals, and can be used in extreme conditions (high temperatures, UV).
MS Polymers are one component adhesives without solvents which harden from absorbing humidity. With a faster reaction than with silicones or PU, the reaction continues for 24 hours and until it is set. Non-toxic and without danger for the environment, MS Polymers are ideal substitutes for silicones and PU.
|
|
More than 20 years ago, Bergquist set the standard for elastomeric thermal interface materials with the introduction of Sil-Pad. Today Bergquist is a world leader with a complete family of Sil-Pad materials to meet critical needs of a rapidly changing electronics industry.
Sil-Pad thermally conductive insulators, in their many forms, continue to be a clean and efficient alternative to mica, ceramics or grease for a wide range of electronic applications. Sil-Pad provides:
Excellent thermal performance
Eliminates the mess of grease
More durable than mica
Efficient "total applied cost" that compares favorably with other alternatives.
|
|
No-cure, 1-part thermal paste DP series:
*Easy to apply: 1-part, no-cure.
*Running and vaporization problems to nearly disappear due to cross-linked particle structure.
*High thermal conductivity up to 6.5 W/mK.
*REP-100 to retain electromagnetic noise absorption property.
|
|
|
Silicone or fluorosilicone elastomers filled with conductive particles. Available as extruded or moulded products. Conductive fillers include, silver plated aluminium, silver plated copper and nickel graphite.
|
|
|
Available in a wide range of standard profiles and special design profiles. Sheet with conductive adhesive,“O” ring, cord and hollow shape. Nickel-graphite, graphite and silver base.
|
|
Technical files
GT 1000
Silver plated
copper
Cu/Ag
GT 2020
Silver plated
copper
Ag
GT 3100
Silver plated
copper
Ni/C
GT 5080
Silver plated
copper
Al
GT 1007
Silver plated copper
fluorosilicone
Cu/Ag
GT 2024
Silver plated
copper
Ag
GT 3107
Silver plated
copper
Ni/C
GT 5087
Silver plated
copper
Al
GT 1015
Silver plated
copper
Cu/Ag
GT 2027
Silver conductive
fluorosilicone
Ag
GT 5000
Silver plated
aluminium
Al/Ag
BL 10000
BL 10000-50SH
Conductive
Carbone
GT 2000
Pure silver
Ag
GT 2401
Silver conductive
elastomer
Ag
GT 5007
Fluorosilicone
Silver plated
aluminium
Al/Ag
BL 10007
Fluorosilicone
|
|
Available in a wide range of standard profiles and
special design profiles. From a simple “O” ring
cord down to complex hollow forms. Particularly
suitable for applications requiring low closure
forces. Profiles can be supplied adhesive backed
or with rivet/screw holes for easy assembly.
Secondary environmental sealing can be
incorporated into the gasket.
Comprehensive ranges of cross sections are
available in extruded form. The profiles below are
preferred standard that are readily available.
Other special profiles are available upon request.
|
|
| ... products without technical information |
| |
The TKS-083-Serie comes in two models: powder coated aluminium frontplate with silicone keys or anodized aluminium frontplate with metal coated silicone keys. Based on carbon-on-gold switching technology, these keyboards can be used in many different industries from laboratories to POI to noise sensitive environments.
These ultra quiet keyboards allow multiple users to simultaneously use the keyboards where noise levels are required to be kept to a minimum. The anodized
aluminium version with metal coated keys will aesthetically compliment any POI system and is strong enough to withstand heavy use. The keyboards are sealed to IP65 standards and are available as panel-mount or desktop. Pointing device options include 38 mm trackball or touchpad. We offer semi or full customisation
on these keyboards.
|
|
| ... products without technical information |
| |
... see all the products in the category
Keyboards
|
 see the results for the following category : Hoses |
|
|
