|
|
Molykote® synthetic oils are produced
through chemical synthesis to meet
targeted performance specifications and
to minimize impurities. Synthetic oils
are formulated with new generation
performance-enhancing additives.
Molykote mineral oils are produced in
a series of proprietary hydroprocessing
steps, which ensures that they are nearly
free of contaminants. Synthetic blends are
comprised of synthetic and hydroprocessed
mineral oil base stocks.
All oils in this section are available in pails
and drums.
Molykote® gearbox lubricants help prevent wear and process interruptions in power transmission
systems and components. Compared to conventional oils they also offer greater resistance to
oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils
maximize fill intervals and maintain viscosity characteristics at wide temperature ranges. Molykote
gearbox oils meet AGMA 9005-E02. In addition to AGMA, Molykote L-21XX series gearbox oils also
meet DIN 51 517 Part 3, US Steel 224, Flender, Cincinnati Machine, David Brown SL.53.101.
|
|
Castrol gear oils range from lightly loaded to heavy shock loaded applications.
From conventional sulphur-phosphorus to high performance products, Castrol gear oils are for all applications.
|
|
| ... products without technical information |
| |
Hand driven all purpose gear drive for multiple applications. Motor drive possible for a speed
up to 100 revolutions/min.
— robust and reliable
— maintenance-free
— security crank with internal self actuating load brake
— alternatively without self actuating load brake for shifting of loads
can be equipped with:
— one or several rope drums
— chain wheels for roller chains
— chain sprockets for link chains
— with crank extensions
— with crankshaft extension
|
|
Spurgear winches TL125-2000kg
The GEBUWINch range of hand-driven spur geared winches are robustly built and meet the construction and safety standards in accordance with DIN 15020. The spur geared winches are available in various hoisting capacities. These are between 125 kg and 2000 kg calculated on the first cable layer on the cable drum. The spur geared winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance-free bearings. The winches are available in combined grey/black enamel paint (GR) or provided with zinc-plated surface treatment (EV), which means that rust protection is further improved.
The type designation is as follows:
TL = range of GEBUWINch spur geared winches for hoisting load 125, 300, 500, 1000 or 2000 kg
GR= Painted grey colour
EV= zinc-plated
|
|
Wormgear winches WW2000-5000kg
The GEBUWINch range of hand-driven worm geared winches are robustly built and meet the construction and safety standards in accordance with DIN 15020. The worm geared winches are available in different hoisting capacities. These are between 2000 kg and 5000 kg calculated on the first layer on the cable drum. The worm geared winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance-free bearings.
The winches are available in combined grey/black enamel paint (GR) or provided with zinc- plated surface treatment (EV), which means that rust protection is further improved.
This range of winches is standard provided with a secondary drive. This allows you to use a second hoisting speed by transferring the crank.
The cable drum can be provided with a cable groove (GD) for better cable routing and storage.
The winches are available with a free-spool device for the cable drum (FS). This cable drum free-spool device can, if necessary, also be provided with an adjustable friction brake (FSB), for controlled cable unwinding.
The type designation is as follows:
WW = range of GEBUWINch worm geared winches for hoisting load 2000, 3000, 4000 or 5000 kg
GR= painted grey colour
EV= zinc-plated
D= 1 cable compartment
2D= 2 cable compartments
GD= grooved cable drum
FS= provided with cable drum free-spool device
FSB= provided with cable drum free-spool device and adjustable friction brake for controlled cable unwinding
|
|
Wormgear winches VL250-1500kg
The GEBUWINch range of hand-driven worm geared winches are robustly built and meet the construction and safety standards in accordance with DIN 15020. The worm geared winches are available in different hoisting capacities. These are between 250 kg and 1500 kg calculated on the first cable layer on the cable drum. The worm geared winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance-free bearings.
The winches are available in combined grey/black enamel paint (GR) or provided with zinc-plated surface treatment (EV), which means that rust protection is further improved.
The cable drum can be provided with a cable groove (GD) for better cable routing and storage.
By dividing the cable drum into a number of cable compartments, the use of 2 cables (D or 2D) as standard is possible on all worm geared winches. Upon request, a number of cables is possible.
The type designation is as follows:
VL = range of GEBUWINch worm geared winches for hoisting load 250, 500, 1000 or 1500 kg
GR= painted grey colour
EV= zinc-plated
D= 1 cable compartment
2D= 2 cable compartments
GD= grooved cable drum
|
|
Upon request, all worm geared winches can be equipped with an air motor drive.
The standard winches then need to be modified.
The air motor is easy to uncouple to allow a number of winches to be operated by 1 air motor.
|
|
| ... products without technical information |
| |
... see all the products in the category
Winches
|
|
Rack & pinion jacks load 1,5 t to 10 t (fig.) withself-locking security crank, keeps the charge in every required position - for pulling or pushings. Special versions on request: - different length of rack - different lift - drive shaft to connect several jacks - with internal brake and removable crank
|
|
Rack & pinion jacks load 0,5 t and 1 t, with self-locking worm gear for lifting, for lowering, adjusting and fixing of mechanical components, devices, machines, etc.. 0,5 t version also available in stainless steel
robust version with milled rack and hardened driving parts, for in- and outdoor applications
Special versions against additional charge:
- an other lift or length
- an other crank version
- an other fixing possibility
- an other surface treatment
|
|
The steel jack is standard equipment for tool and machinery shops, contractors, shipyards, agriculture and workshops:
our steel jack with fixed lifting claw can be delivered with different types of hand crank for lifting the jack shaft along the rack. It offers a very long service life due to its high quality spur gear, precise worked crank gear as well as additional worked pawl.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Gear Shaving Cutters. Gleason manufactures
and resharpens precision shaving cutters to
support Gleason Hurth shaving machines and
any other gear shaving machines. The
Gleason shaving cutter design is optimized
for maximum tool life.
|
|
Chamfering Rolling Deburring Tools
Chamfering tools: for spur or helical gears, for straight or inclined gear lateral surfaces
Deburring tools:
- P type (standard tool for straight gear lateral surfaces)
- P 1000 type (like P type but grooved)
- PR type (with alternate sections for straight gear lateral surfaces radiused to the root)
- PR 1000 type (grooved tool for straight gear lateral surfaces radiused to the root)
- A 1000 type (grooved tool for inclined gear lateral surfaces)
- AR 1000 type (same as A 1000 type but radiused to the root)
- SPR 1000 type (special tool for chain sprockets)
- T 1000 (grooved tool for chamfering turning chamfers on the tooth tip)
Chamfer-roller tools: to machine the gear tooth profile, to remove the secondary burr
|
|
As one of the largest manufacturers of gear cutting tools worldwide, our tool manufacturing programme features a wide range of shaper cutters, branded Samputensili, Fellows and Star SU, including disk-type shaper cutters, deep counterbore-type shaper cutters and shank-type shaper cutters. Our shaper cutters are generally ground for pre-finishing and finishing operations, although in certain cases they may also be supplied unground.
Min. / Max. module: 0,5 - 8,0 mm
Max. diameter: 300 mm
Profile modifications: tooth tip chamfer, protuberance, topping, flank modifications for tip and/or root relief on gear, modification of pressure angle, combinations of several of the above modifications.
Materials: various high-speed steels produced by powder metallurgy. Other materials are available on request.
Special profiles / profile modifications for chain sprockets, cams, splines, timing belts and large modules.
Our Express programme features X4®shaper cutters. We not only guarantee supply of your shaper cutters including coating in just 4 weeks (20 working days), but, in comparison with conventional shaper cutters, our X4® tools also offer you significant cost saving advantages, since the shorter usable profile reduces both production costs and delivery times. Moreover, advanced manufacturing techniques have improved the quality of our X4® shaper cutters.
|
|
|
Roll scan inspection means that gears are scanned in rolling contact with a special inspection gear. The instrument combines the simple, robust and temperature stable design of the single flank gear rolling inspection with the greatest information density of modern coordination measuring technology, yet the measuring time remains short.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
