|
|
|
Tap Magic Aluminum is the cutting fluid of choice for any work on aluminum (and other soft metals). Unlike some other fluids on soft metals, it will not stain the surface of the work. Precision is always excellent and the finish is always superb.
|
|
Cutting Fluid
Ref: HDC
Industrial grade metal working oil
Powerful lubricant and friction reducer
Allows high speed punching
Extends tool life by reducing the risk of pulling
|
|
|
Also with these lubricants we remain naturally for our mark concept "humanly Technology - faithful for humans, nature and machine". All products of the SulFol LC-row are, almost aromatic-free free from chlorine and oil mist-poor. Test us!
|
|
|
Tap Magic ProTap is our original biodegradable cutting fluid. It's totally free of all regulated chemicals, yet it's still highly effective for all cutting operations on all metals.
|
|
|
Tap Magic with EP-Xtra® is an ozone-friendly formula that provides outstanding performance on all cuts and all metals - even hard metals such as stainless steel. The proprietary additive, EP-Xtra, provides a synergistic boost in performance.
|
|
|
The extreme performance heavyweight champion for hard metals – inconel, titanium, stainless...any metal up to 45 Rockwell hardness! Virtually eliminates work hardening. Clinging action means it stays with the tool for those big, deep hole cuts and for lathe and mill work because it isn't prone to sling off.
|
|
|
This is a high-visibility, foaming action cutting fluid with the proprietary additive EP-X3® for extreme performance on the hardest metals – even those up to 45 RC. The high-visibility foam allows you to conveniently gauge application rate and fluid presence. Clinging action stays with the tool longer. Eliminates work hardening.
|
|
|
Tap Magic Formula 2 Eco-Oil is totally biodegradable and has a natural oil base that's remarkably low in odor and smoke — even on cuts that produce a lot of heat. It contains our EP-X3 additive for a synergistic boost in perfomance. Highly effective for all cuts on all metals.
|
|
|
Tap Magic Formula 1 Aqueous is a biodegradable water-based fluid that, unlike other water-based fluids, is non-corrosive. It contains our EP-X3 additive for a synergistic boost in perfomance. This fluid is highly effective for all cutting operations on all metals except magnesium.
|
|
Model 4199
Gravity Porta-Valve Gravity Filler
Model 4199 Gravity PortaValve is designed to fill valve type bags with high density free flowing products such as steel shot and similar materials.
How it Works:
The valve bag is installed on the fill spout, and rests in the bag chair mechanism. When the clamshell gate opens, product gravity flows into the bag. When the bag has reached the designated weight, the clamshell gate closes, and the bag can be removed.
Design features:
- Scale-beam gross weigh.
- Gravity feeder.
- Mechanical catch gate release.
- Manual bag clamps.
- Mild steel construction.
Available Features:
- Pneumatic bag clamps.
- Pneumatic bag inflator.
- Stainless steel contact surfaces.
- Special paint finishes.
- Supply and transition hoppers.
- Take-away conveyor.
|
|
VALVE BAGGING SYSTEMS
Whatever your product, filling accuracy or level of automation desired, PREMIER TECH SYSTEMS has the equipment you need for packaging and handling your valve bags. Our product line includes auger, air and impeller packers equipped or not with an automatic bag placer. For extremely light and fine chemical powders we also offer a vacuum packer, which can be fitted with our brand-new bag placing and ultrasonic sealing system
|
|
Efficient and reliable filling of floury, powdery and gritty products, just as starch, flour, baking ingredients, soybean products, proteins, sugar, etc.
For product filling the pneumatic packer utilises air. The proven design of the chamber bottom and top fluidisation air supplies that are separately adjustable depending on the flow behaviour of the product provides an optimum product feed rate with a minimum air supply.
Thanks to the continual air suction during the filling, high filling outputs are guaranteed with a minimum internal bag pressure.
Advantages of the pneumatic packer:
- gentle, clean and low-dust product filling
- minimised product residue in the filling chamber
- easy cleaning in case of product change
- project-specific configuration thanks to the BEHN + BATES modular system
Output of the pneumatic packer:
up to 300 bags per hour per spout
|
|
TURBINE INLINE PACKER
Depending on the properties of the product to be filled, e.g. bulk density, flow properties and particle size distribution, we offer a customised packing system. We have available 2 different turbine filling systems in our product range: the HAVER vertical turbine filling system and the HAVER horizontal turbine filling system.
|
|
|
|
|
|
Impeller Valve Bag Filling
Impeller Valve Bag Fillers, offer the best solution; for packing fine powders of mid range to high bulk density product into valve bags. The supply hopper is equipment with 4-blade impeller powdered by horizontal drive shaft which feed the product to the valve bag with the assistance of low pressured air.
The product is filled according to the gross weighing system, which means that the bag are weighed during filling process. Thanks to electronic weighing system and double speed filling (coarse and fine) feature, this machine ensure constant and high accuracy filling rates. Depends on capacityrequest 2-3 spouts linear type models are available.
Pneumatic Valve Bag Fillers
Pneumatic Valve Bag filter, offer the best solution for packaging powder, fine powders, granular and grinded of low & mid range to high range bulk dencity products to valve bags. The supply hopper cut the product inlet when the level sensor gives a signal to pneumatic controted butterfly valve. The continous products flow from the supply hopper is ensured by the top air feeding system and bottom air fluidization system which provides on optional products feed rate with a minimum air supply.
Auger Valve Bag Fillers
Auger Valve Bag Fillers, offer the best solution; for packaging low density, low fluidity, powder and granular product to valve bags.
When a fill cycle is initiated, the product is conveyed by the auger into the bag. The product is filled according to the gross weighing system, which means that the bags are weighed during the filling process.
|
|
|
|
|
|
VARLIK AAD Type machines are designed for packing of open mouth bags to fill product and then close; and net or gross weighing units are installed on according to your need. Type of product feeding depends on characteristics of product; free flowing, screw type, belt type or vibratory type. Your satisfaction of machine is strictly connected to above decisions according to your needs and requirements.
* Free flowing type feeding for easy flowing, dry and granulated products. For example sugar, salt, sand, seed grain, ?
* Vibratory feeding type for difficult flowing products, coarse granular, abrasive and amorphous shape. For example coal, nail, wire products, rock,?
* Belt feeding type for free flowing or not but dedicated or wet products. For example tea, wet vegetables and fruits, fertilizer,?
* Screw feeding type for difficult flowing products but damage is not important during packing. For example cement, sand, construction chemicals, soil,?
The following points are essential to reach good weighing accuracy of outputs:
* Perfect working of product feeding mechanism.
* Perfect controller with perfect software and program.
* Reliable load cells.
* Technical support by specialists who has good knowledge on product/weighing/packing.
With over 25 years of experience, VARLIK Machine selects reliable solution for your product and best machine combination for your needs. Additionally you are only able to find innovative specific software?s and improved programs just in VARLIK machines.
|
|
|
|
|
|
Extracting machines automati to us Arcofast series
The Arcofast is an extracting machine automatic rifle to lateral positioning (operating or opposite side), for the pieces withdrawal of money pressofusi and their drainage by means of lateral ribaltamento of 90°.
Composed from arm of withdrawal of money, mounted on adjustable support of support, to commando electrical worker for the movements of income and escape, with programmabile preapproach. The commando is always pneumatic, instead, for the functions of taken, extraction centers them. Pneumatic commando for the functions of taken, extraction centers them, ribaltamento and warehouse pieces. Drive with electric motor to alternating current set in action from inverter. Suit of control panel, cables connection electrical workers, device of control prelevamento pieces with predisposed support to receive 6 sensors (the ns. supply comprises of series n. 2 sensors). The version Arcofast 3 is in a position to serving presse from 140 to 560 ton.
|
|
|
|
|
|
Automatic sprayers model PLUS
The PLUS model is created to serve die-casting machines from 400 to 2500 ton. Buold with brushless motors (on both horizontal and vertical axis) it is able to move the 2 axis at the same time in order to allow entries, internal movements and exits from the dies at very high speed (up to 1,2 m/s). In order to satisfy the different needs of any foundry we have created several models where the difference is basically the vertical stroke (1000 mm, 1300 mm, 1500 mm, 1750 mm, 1900 mm) and of course the horizontal axis. The spraying head is equipped with 7 nozzles fixed platen + 7 nozzles movable platen for the smallest model up to more than 40 nozzles fixed platen 40 nozzles movable platen for the biggest model. On demand it permits to use a spraying head divided into 3 working bands independently programmable with double solenoid valves (one for mixing and two for blow) for spraying of a first lubricant. The easy programming of times, speeds and positions is guaranteed by a microprocessor Siemens S7 and a control panel equipped with dies memory.
|
|
To provide our customers completely integrated production cells, IDRA has established strong partnerships with the main foundry automation suppliers.
For extraction of castings Idra cooperates with ABB and uses the IRB series Robots, also for programming and diagnostic. These are completely integrated in the die casting cell so as to have only one reliable production system.
|
|
The LX/L series die lubricator with 1 or 2 axis, assures precise and accurate spraying for easy extraction of castings.
Modular standard lubrication head with adjustable width to adapt to the shape of the casting. On request, lubrication heads of other brands can be mounted.
Spraying cycles are automatically adjusted to any changes made to the program and stored on flash eprom. The Lubricator is supplied with standard functions easy to customize.
Equipped with Siemens S7 Control for flexible and efficient management, as well as a TOUCH-SCREEN operator panel to store all programs on flash eprom.
|
|
| ... products without technical information |
| |
SERCO PORTABLE MACHINING UNITS
The SERCO units are positioned and locked by means of a column/arm system clamped on the outer part of the surface to be machined (allowing internal machining). Machine set up is fast and easy. After a first visual positioning, we can get within a few minutes, using a simple specific device, a parallelism and concentricity within a 1/100 of mm precision. A powerful air motor drives the tool rotation (hydraulic motors on request) and radial automatic feed (with a selection of two speeds).
Maintenance
Flanges
Safety valves
Sealing valves
High pressure valves
Portable Equipment
Portable machining equipment
Portable boring and surfacing machines
Portable surfacing machines
Portable grinding machines
Portable lapping machines
For further information please contact :
PROTEM SAS
ZI LES BOSSES
F-26800 ETOILE SUR RHONE
FRANCE
Tel +33 4 75574141
email : n.reicher@protem.fr
|
|
|
The Hot Tap Tool is the most precise and economical way to tap through 2", 3", 4", or 6" branch saddles. This tool can be used with the No. 2LC, No. 2CU, No. 14, or the No. 28CU fusion machines in combination with the Sidewinder. The gland is customized to meet the user's material of choice. The user does not have to do any compatibility fusion in the tool make-up. Main line contamination is eliminated by containing continuous chips in the cutter, ahead of the coupon, then retracting them out of the main. Tool components are butt fused together, eliminating the need for safety chains. The gland fitting of the tool includes a packing seal for safety, ensuring no leakage around the cutter drive shaft, and a test valve. The McElroy Hot Tap Tool is long enough to meet or exceed ASTM standards for squeeze off dimensions or it can be used with a ball valve.
|
|
Threading
* Dependable heavy duty machines for maximum up-time, superior quality threads and minimal threading time.
* Industry’s widest selection of hand and power threading equipment.
* Manual “hammer” type chuck and “auto-chuck” models.
|
|
The V-Lap F6 is standard equipped with a range of grinding and centre plates for grinding and lapping any type and size of ‘flat’ seat up to 6” / DN150 mm. The centre plate keeps the grinding plate in position, but also gives an eccentric rotation ensuring constant and complete coverage and absolute flatness.
Abrasives
The V-Lap F6 is completed with a large consumer quantity of polyester based, self-adhesive Aluminum Oxide round foil tips in grains rough, middle and fine. The foil tips can be used dry and on all common seat materials.
Drive machine
The V-Lap F6 is standard equipped with a battery drive machine and is delivered with 2 battery’s. The low weight and good balance of the machine increases the grinding performance and makes it easier to attain high quality flat ‘results’.
The complete set is packed in a robust, but light weight carrying case.
|
|
3 Axis 800 / 2000 / 4000
The machine is equipped with: one control panel, with an auto diagnostic display system, for the rotation and the feed of the arm and the milling cutter.
|
|
VAS M 16-63
For metric threadng DIN/EN 60423 of electrical conduit pipes up to M&·. Also valid for gas pipe threading (DIN 2999/BSPT or NPT) up to 2" (dies are required). Ligth and compact, weighing only 46 Kg.
Efficient cutting, reaming and threading operations.
Universal single-phase 680 W motor, insulated according to VDE/EEC standards
40 RPM without load and 27 RPM with load. Easily replaceable brushes. Automatic and adjustable lubrication inside the ratchet threader, directly over the dies. Self-locking jaws, whitch are easily replaceable.
The threading machine M63 includes: automatic ratchet theader, 2 set of dies (M16-40 and M40-63) 3 legs, 1 cutting oil container, and a set of assembly tools.
Size: 590x375x395 mm.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
