|
|
Cutting Fluid
Ref: HDC
Industrial grade metal working oil
Powerful lubricant and friction reducer
Allows high speed punching
Extends tool life by reducing the risk of pulling
|
|
|
Also with these lubricants we remain naturally for our mark concept "humanly Technology - faithful for humans, nature and machine". All products of the SulFol LC-row are, almost aromatic-free free from chlorine and oil mist-poor. Test us!
|
|
|
Tap Magic Aluminum is the cutting fluid of choice for any work on aluminum (and other soft metals). Unlike some other fluids on soft metals, it will not stain the surface of the work. Precision is always excellent and the finish is always superb.
|
|
|
Tap Magic ProTap is our original biodegradable cutting fluid. It's totally free of all regulated chemicals, yet it's still highly effective for all cutting operations on all metals.
|
|
|
Tap Magic with EP-Xtra® is an ozone-friendly formula that provides outstanding performance on all cuts and all metals - even hard metals such as stainless steel. The proprietary additive, EP-Xtra, provides a synergistic boost in performance.
|
|
|
The extreme performance heavyweight champion for hard metals – inconel, titanium, stainless...any metal up to 45 Rockwell hardness! Virtually eliminates work hardening. Clinging action means it stays with the tool for those big, deep hole cuts and for lathe and mill work because it isn't prone to sling off.
|
|
|
This is a high-visibility, foaming action cutting fluid with the proprietary additive EP-X3® for extreme performance on the hardest metals – even those up to 45 RC. The high-visibility foam allows you to conveniently gauge application rate and fluid presence. Clinging action stays with the tool longer. Eliminates work hardening.
|
|
|
Tap Magic Formula 2 Eco-Oil is totally biodegradable and has a natural oil base that's remarkably low in odor and smoke — even on cuts that produce a lot of heat. It contains our EP-X3 additive for a synergistic boost in perfomance. Highly effective for all cuts on all metals.
|
|
|
Tap Magic Formula 1 Aqueous is a biodegradable water-based fluid that, unlike other water-based fluids, is non-corrosive. It contains our EP-X3 additive for a synergistic boost in perfomance. This fluid is highly effective for all cutting operations on all metals except magnesium.
|
|
ASge 636
Gewindeschneider bis M 8
Handlicher, leistungsstarker Gewindeschneider.
Kraftvoller Durchzug zur zuverlässigen Aufgabenbewältigung.
Integriertes Wendegetriebe mit Schnellrücklauf.
Stufenlose elektronische Drehzahlstellung für gefühlvolles Ansetzen.
FEIN Kinetik-Griff für ermüdungsfreies und sicheres Arbeiten.
Integralschalter für komfortable Bedienung.
|
|
CP Industrial drills:
These tools are suitable for high production rates such as those on production/ assembly lines, where high durability is required and the tools are used frequently. Our industrial tools combine the best of quality, durability and ergonomics for your most demanding applications.
|
|
An air drill's chuck does most of the work. That's why all Ingersoll Rand air drills are engineered with high quality chucks that resist wear and tear. Our new family of air drills have industrial grade chucks and keyless chuck versions that are extra tough for drilling, sawing, valve guide reaming, cylinder honing and wire brushing. They are more powerful, efficient and durable than previous models, with smooth, quiet operation.
1/4" Chuck - .4HP, 1800 RPM
3/8" Chuck - .5HP, 1200-2500 RPM
1/2" Chuck - .5HP, 400-500 RPM
|
|
| ... products without technical information |
| |
Style 630
Material Specifications:
Body: 18-8 Type 304 Stainless Steel to ASTM A-240.
Bolts: 18-8 Type 304 Stainless Steel.
Nuts and Washers: 18-8 Stainless Steel, coated.
Flange: 18-8 Stainless Steel, ANSI 150 Lb.
Drilling. Recess per MSS-SP60. Also available in Carbon Steel per AWWA C-207, Class D.
Gasket: Buna N (Nitrile) specially compounded for water applications. Proven in water service
for over 50 years. Wedge-type gasket design for higher sealing pressures.
Finish: Fully Passivated to ASTM A-380.
Usage: For cast and ductile iron, PVC (DR 18 or thicker), A-C and steel pipe installations.
Pressure Rating: 150 PSI or higher depending on pipe material and branch size.
|
|
| ... products without technical information |
| |
|
The Makino MCC Series Horizontal Machining Centers are designed to streamline the machining and processing of large plastic injection molds. High performance spindle technology allows roughing and finishing in a single setup. High acceleration motion control allows extraordinary blending and machining performance while maintaining or reducing cycle time resulting in shorter lead times to produce large molds.
|
|
|
|
|
|
LASER-Assisted
3D Atom Probe for Semiconductors and Materials
The CAMECA LA-WATAP instrument is the next generation of Tomographic (or 3D) Atom Probe, providing quantitative atomic scale 3D elemental mapping of chemical heterogeneities in materials.
The LA-WATAP offers the following advantages:
Analysis of semiconductor materials with near-atomic depth resolution. This is possible by using a flexible (IR/ visible/ UV) ultrafast (400fs) laser setup. The unique hybrid evaporation mode combines reduced heating of the sample with ultra-fast surface polarisation promoting ion evaporation under the high DC electrical field.
Excellent mass resolution even on low thermal conductivity materials. This is obtained by reducing the heating of the sample with ultra-fast laser pulsing. Conventional picosecond laser based 3DAP work in thermal evaporation mode leading to thermal effects and peak tails.
Analysis of thin electrically insulating layers by using fs-laser pulses of short wavelength (UV).
Highest analyzer transmission (detected ions/evaporated atoms >60%). Reflectron-based 3DAP instruments reduce this typically to 35% due to the use of grids. Transmission is a key parameter when applying the (destructive) 3DAP technique to the quantification of nanoscale volumes.
Large analysis area (100nm in diameter) for a better statistics on composition measurements.
Fast acquisition, up to 1E6 atoms per minute depending on sample strength (flux of at./pulse).
Best quantitative results with the exclusive Advanced Delay Line Detector (ADLD) and its benchmark multi-hit performance.
Flexible and fast dedicated FIM (Field Ion Microscopy) detector for metallurgical application with highest S/N performance and fast switch between FIM and 3DAP modes.
|
|
Grinding relief quality measurement of threads and chamfers on taps:
The measuring device RELIEF EXPERT is designed for precise measurement of the grinding relief of threads and chamfers on almost all types of straight and spiral fluted workpieces.
- taps
- thread formers
- thread milling cutters
|
|
VX Mold & Die includes an easy to use utility for automatically creating parting lines and faces. VX Mold & Die also handles inserts, cooling channels, connectors and ejector pins. As with parting lines, VX can automate core cavity removal. Unlike other systems, a couple of quick mouse clicks handles the entire process. VX is the only CAD/CAM system to offer reverse engineering tools in the core system. With the electrode wizard, VX speeds creation of the mold electrode that automatically handles electrode offset. Our unique planar option burns the electrode up to 40 percent faster than other methods. This provides for a very strong combination for all those that design complex molds and dies.
Features and benefits:
Hybrid solid and surfaces modeling kernel.
Advanced solid modeling.
Advanced surface modeling.
Advanced assembly modeling.
Model healing.
Industry standard CAD formats support.
PARTsolutions interface.
SmarTeam integration.
Mold and Die module.
|
|
|
|
