|
|
Battery Driven Grease gun LAGG 400B
Quick and easy grease filling
The SKF Battery driven grease gun LAGG 400B is a high quality grease gun suitable for lubricating bearings, machines, vehicles and other applications. Ergonomically designed and user friendly, the grease gun can be used with standard SKF grease cartridges (420 ml) or filled with approximately 500 cm3 (17 US.fl.oz) of loose grease.
Compared to hand operated grease guns, a 420 ml cartridge can be emptied in approx 10 minutes with minimum effort, resulting in significant cost and time saving
-Electrical operation and the ergonomic design of hand grip helps reduce operator fatigue compared to manual methods
-Easy-to-use one hand operation makes the grease gun user friendly
-Supplied with various electrical plugs and two power supply versions (230 and 110 V charger) makes it operational worldwide
-Battery operation allows use in almost all environments without use of a mains supply
-Long battery life of 1000 charging cycles helps reduce product life costs
-Refillable: grease filling nipple and de-airing valve allow filling up by filler or grease pump
-Safety valve setting set to 40 MPa (5 800 psi) helps increase operator safety
-Supplied with M10x1 nozzle, interchangeable with SKF hoses, SKF grease meter LAGM 1000E and other accessories |
|
wide field of application ranging from small machines such as woodworking machinery to large heavy industry such as steel plants or paper mills.
Dropsa provides an extensive line of equipment for grease lubrication and system monitoring. The most popular systems used for grease lubrication are Dual Line and Progressive Divider.
The modular design pioneered by Dropsa allows easy configuration and expandability of the system. Active components can be substituted during maintenance without the need to disrupt the interconnecting pipe-work.
|
|
| Pump is pneumatically operated i.e. through pneumatic line, connected to the ports of cylinder. The cylinder is built in with the pump. During ON period of the pneumatic line, piston inside the cylinder is pushed, ejecting out pressurized grease from the outlet port of the pump body. During reverse flow of pneumatic line, grease is sucked through the suction port in the pump. Spring force through follower plate exerted on the top surface of the grease (filled in the reservoir) makes the suction of the grease positive and easier. The grease thus filled in cylinder is ready for ejection. Pump is mounted on machine frame. |
|
APPLICATION:
For lubrication at friction points on presses, stamping presses, machine tools, conveyors, etc.
FUNCTION:
By pressurizing the pneumatic cylinder the piston is lifted thus closing first the suction port. Then the lubricant inside the cap is being displaced via valve seat and ball into the piston chamber. When the piston is moving upwards, the cross bore provided, having an annular grovve, reaches the outlet ports.
These ports are not on the same level so that the lubricant is discharged alternatvely, in a premetered quantity. Relieving the pneumatic cylinders returns the piston into is initial position thus recharging the chamber between piston and cap with lubricant.
With single-line and progressive systems the total feed volume of the pump is taken from outlet "X"; through the "Y" port, in single-line systems on the other hand, the lubricant, when depressurized, is returning into the reservoir. The parameter determining the minimum pulse frequences is an empirical value dependent upon lubricant, air pressure, number of outlets, and, last but not least, piping cross- sections and length of main feed line. |
|
Ideally suited for plant in continuous operation: Steel Works, Cement Works, Rolling Mills, Large Cranes and Sewage Processing.
Designed for heavy duty performance and reliability, these multi-line radials are equipped with integral pumping units which deliver an adjustable volume of lubricant to each bearing feed line.
A maximum of 30 outlets is provided. Additional points may be covered by distribution blocks.
Radial Systems
MR/AF Range
Lubricants incl. Grade 2 grease
Ideal for larger installations such as steel works, fixed plant and coal mines
|
|
The Lubeplus GX is ideally suited to mechanical applications and plant used in the food processing, packaging and printing industries. Can accommodate systems with up to 200 lubrication points.
Lubeplus GX is designed to operate with a positive displacement unit (PDU) or with metering flow unit systems. The lubricator is available with a wide combination of condition monitoring features and a choice of 'with' or 'without' microprocessor control.
Gear Pump operation
Max. operating pressure 25 bar
Can use Oil or fluid grease
Available in 3 or 6 litre reservoirs.
Supply voltages 110v or 240
|
|
Dropsa has developed a wide range of standard electric, pneumatic and hydraulic pump packages suitable for oil loss systems. A custom service design is available to tailor pump packages to specific customer applications.
|
|
| Electrically operated Pump of 12V/24V DC It has built-in reservoir. These type of pumps are quite accepted on earthmoving equipment like shovels, dumpers, excavators, buses and trucks. These pumps have different plunger pumps which are connected to the secondary block on the chassis. Normally 3 plunger pumps are sufficient to cover 25-30 points. The pump is so designed that no foreign particle goes into its reservoir The reservoir once filled with grease is sealed with lock and key arrangement. |
|
In-Line Lubricator :
In-Line Lubricators assure proper lubrication for small pneumatic hand tools. These in-line lubricators put the oil source right at the tool. Oil capacity is 1/4 oz. (1 ml) enough to last through an average 8-hour shift. This lubricator requires cyclical or intermittent airflow for proper operation, and consequently works best when installed at the tool inlet or on a short hose near the tool. |
|
Air/Oil lubrication is a relatively new emergent lubrication system. The recent developments in lubricant technology have expanded air/oil lubrication to dry machining applications.
The air stream, that normally operates continuously, provides both a transport for the oil to the lubrication point and cooling.
The oil-injected into the air stream at regular intervals coats the surfaces to be lubricated and reduces friction and wear.
Dropsa offers many articulated solutions to Air/Oil Lubrication - the VIP4 Family of products is the latest addiction to this range.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
