|
|
|
|
|
|
Battery Driven Grease gun LAGG 400B
Quick and easy grease filling
The SKF Battery driven grease gun LAGG 400B is a high quality grease gun suitable for lubricating bearings, machines, vehicles and other applications. Ergonomically designed and user friendly, the grease gun can be used with standard SKF grease cartridges (420 ml) or filled with approximately 500 cm3 (17 US.fl.oz) of loose grease.
Compared to hand operated grease guns, a 420 ml cartridge can be emptied in approx 10 minutes with minimum effort, resulting in significant cost and time saving
-Electrical operation and the ergonomic design of hand grip helps reduce operator fatigue compared to manual methods
-Easy-to-use one hand operation makes the grease gun user friendly
-Supplied with various electrical plugs and two power supply versions (230 and 110 V charger) makes it operational worldwide
-Battery operation allows use in almost all environments without use of a mains supply
-Long battery life of 1000 charging cycles helps reduce product life costs
-Refillable: grease filling nipple and de-airing valve allow filling up by filler or grease pump
-Safety valve setting set to 40 MPa (5 800 psi) helps increase operator safety
-Supplied with M10x1 nozzle, interchangeable with SKF hoses, SKF grease meter LAGM 1000E and other accessories
|
|
|
|
|
|
The Locopump S2 (2nd Series) grease is an ideal single acting pneumatic grease pump generally used in single line progressive divider lubrication systems such as SMX, SMO, SMP or SMPM.
It comes equipped as standard with a spring loaded 2 kg reservoir which means it can easily handle NLGI Grade 2 grease.
The transparent reservoir allows the user to clearly see the quantity of grease remaining and a low level grease switch is present to provide remote alarm signals to the machine it is mounted on. Additionally, the reservoir lid can be modified to install a High level or a Dropsa continual level sensing device.
High Reliability is guaranteed by the use of steel in the construction in all the pumping element components and the pump piston is manufactured in ground hardened steel.
The front Fill port is also equipped with a filling filter to ensure that only clean lubricant enters the reservoir.
The pump provides a simple but very cost effective solution for use on many small to mid range grease lubrication systems and is ideal to be used on machines where compressed air is available.
|
|
|
Portable and complete suitcase with special grease gun for lubrication systems. Included with 12v. battery. Exclusive product.
|
|
These fully serviceable, long life, low cost pumps have been engineered for trouble free use specifically for heavy gear oils.
Features
- ideal for pumping heavier gear oils up to SAE 140
- supplied with a 1.8 m (6 ft) delivery hose with non drip nozzle and built-in hose hanger
- an optional CF strainer for auto transmission and hydraulic fluids also available
- 10 year parts availability
- 10 year warranty
|
|
G1-PISTOL1-1
Agrees for cartridge 400 gr. and grease bulk 500 gr. Is appropriate for grease until NLGI2 - Delivered with flexible lengthening-piece and staples 4 bits - Pressure max: 345
Additional bars and kits:
* P3-KITGRA1-1: Rigid with fasten 4 bits
|
|
* Air connection: 1/4”.
* Air motor:3” diameter.
* Product outlet: 3/8” (f)
* Air motor: 6”.
* Air connection: 1/4” (f).
* Product outlet: 1/2” (f).
* Air outlet:3/4” (f).
|
|
# BG-18900
Pneumatic industrial lubrication gun with 30 cm of flexible tube.
|
|
# MCP-5535034
Option: MCP-5510452 Anti-drip support.
Kit for oil dispense from 180/220 kg. drum equipped with pneumatic pump and digital electronic gun.
|
|
# AL-30221/C
Kit for oil dispense from 180/220 kg. drum equipped with pneumatic pump, electronic gun(partial and total accumulative), trolley for its transport and hose reel 10 m. The hose reel is of open or closed type optional.
|
|
The Lubeplus GX is ideally suited to mechanical applications and plant used in the food processing, packaging and printing industries. Can accommodate systems with up to 200 lubrication points.
Lubeplus GX is designed to operate with Positive Dsplacement Units (PDU) or with Metering Flow units . The lubricator is available with a wide combination of condition monitoring features and a choice of 'with' or 'without' microprocessor control.
Gear Pump operation
Max. operating pressure 25 bar
Can pump Oil or fluid grease
Available in 3 or 6 litre reservoirs.
Supply voltages 110v or 240
|
|
Ideally suited for plant in continuous operation: Steel Works, Cement Works, Rolling Mills, Large Cranes and Sewage Processing.
Designed for heavy duty performance and reliability, these multi-line radials are equipped with integral pumping units which deliver an adjustable volume of lubricant to each bearing feed line.
A maximum of 30 outlets is provided. Additional points may be covered by distribution blocks.
Radial Systems
MR/AF Range
Lubricants incl. Grade 2 grease
Ideal for larger installations such as steel works, fixed plant and coal mines
|
|
The flexible high performance heavy duty electric grease pump solution.
DUAL PUMPING MODULE
400cm3 (2x200cm3) pump modules installed in tandem configuration provide 400bar (5880 psi) and redundancy .
This allows the system to continue working even if one pump module becomes ineffective.
Sumo pump is suitable for large single line or dual line systems.
INSTRUMENTATION MODULES
Sophisticated add on instrumentation modules and options means even complex requirements can be met with off-the-shelf standard product.
QUICK SWAP SYSTEM
Both pumping modules can be quickly replaced from the front mounting of the pump. No pipe work needs to be disrupted meaning near-zero downtime during maintenance.
DUAL LINE OR SINGLE LINE IS EASY
The outlet plate fixing system has both Pressure and Return ports.
The outlets are directly compatible with Dropsa's electrical or pneumatic line inverters (including Modular version).
|
|
|
|
|
|
BRAVO: THE SMALL PUMP PACKAGE WITH BIG FEATURES
This small pump package contains many innovative features exclusive to DropsA allowing fresh possibilities in lubrication systems engineering.
It is suited for not only for indoor industrial applications but also mobile plant and vehicle lubrication systems.
VARIO-DRIVE: THE INNOVATIVE SYSTEM
VARIO-Drive is a new power management system for the pump motor that protects and adjusts the pumping system electronically. That means increased reliability and greater lifespan of the pump motor as well as the ability to electronically adjust the pump output from 50% to 100% of its nominal value.
You will find that you are able to precisely control and engineer systems like never before.
NEW GENERATION CONTROLLER
The integrated next generation control system is a central to delivering these new solutions to the customer.
It allows five different ways to trigger and control the lubrication event in a system:
1. Time based interval: 0 min - 99 hours
2. Impulse Counter: 1 - 9999 cycles
3. Combined Trigger: both Timer and impulse counter
4. Impulse Driven: uses impulse input to determine both standby and operation mode (0-9999 impulses)
5. Remote Only: Acts as Slave to host machine.
|
|
The Electric barrel pump ready to be used on Progressive and Dual Line Lubrication systems.
The CannonPump has been designed to meet the requirement of designers that require a traditional barrel pump approach to system design when no compressed air is available.
|
|
Professional Two Speed 14.4-Volt Cordless Grease Gun
Lincoln’s new, heavy-duty 14.4-Volt PowerLuber gives you the power to lubricate just about anything, anytime, anywhere. It features a two-speed switch for high-pressure or high-volume delivery and a cycle indicator pin to monitor grease output. A “Smart” charging system delivers reliable power while its ergonomic grip and balanced design provide optimal user control and comfort. Other features include a hook for a shoulder strap, a built-in hose and coupler holder, and a slim, compact carrying case.
|
|
In-Line Lubricator :
In-Line Lubricators assure proper lubrication for small pneumatic hand tools. These in-line lubricators put the oil source right at the tool. Oil capacity is 1/4 oz. (1 ml) enough to last through an average 8-hour shift. This lubricator requires cyclical or intermittent airflow for proper operation, and consequently works best when installed at the tool inlet or on a short hose near the tool.
|
|
ain areas of application are for mechanical engineering applications with demanding requirements for a defined lubrication: Ensuring a high degree of efficiency with minimal wear and long life, particularly in relation to tool spindles.
How it works: A flow of air inside a narrow tube teases a droplet of oil apart to form streaks that are then transported to the lubrication point. A nozzle continually supplies the bearing with oil in the form of fine droplets. The transporting air stream is practically oil-free upon leaving the bearing.
|
|
|
Kit for oil dispense form 180/220 Kg, drum, equipped with pneumatic pump and digital electronic gun.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
