|
|
|
|
|
|
FastTracer
• Vibration triaxial analyzer
By positioning the FastTracer directly on the test point it is possible to acquire immediately the required information on the three axes allowing the operator to save time.
•USB portable
Plug and Play device with USB connection or wireless. Thanks to MEMS technology the sensor is highly miniaturized and it can be mounted on the most critical test points.
•Powerful and cheap
The acquired acceleration data are sent to the PC that then performs the data processing through the supplied software.This solution allows the full exploitation of the computation capacity of the PC by obtaining some advantages as fare as velocity,precision and costs of the product are concerned
•Real-time analysis in time and in frequency
The included software allows the operator to do real-time analysis both in time and frequency domain (acceleration, velocity, displacement, RMS). The user-friendly interface permits the analysis viewing in the most proper and flexible way
•Off-line and remote analysis
The data acquisition can be recorded in the PC and then investigated with the same interactivity of an online viewing or it can be easily transmitted via internet both in real time or through automatic reports in Microsoft EXCEL
•Accuracy and precision of measurements
An internal autodiagnosis system always ensures the correct working of the instrument by guaranteeing at the same time the precision of the effected measurements
•High flexibility with other software
The high adaptability of FastTracer in different fields has permitted a high grade of integration with the most common control systems (LabView, CVI, etc)
|
|
- The main use of the instrument is in lubrication replenishment process.
- The instrument measures the actual lubrication level of a bearing and tells the operator when the amount of added lubricant is ideal.
- It ensures that bearings are not under or over lubricated.
- Use of this instrument decrease lubricant consumption and machine maintenance cost.
- It also display the bearing condition value.
- Built-in Stethoscope.
- Simple operation.
|
|
Vibration Supervisor DMM-4000/TGV
These field mounting devices consisting of sensor and specific transmitter prepared for preventive control of vibration in bearings of heavy machinery by means a trending system activing alarms according several criterium. These models transmit RS-485 Modbus and 4-20 mA signal proportional to the vibration speed. Optionally can transmit by Radio, Ethernet cable or WiFi.
|
|
The Ultraprobe 10,000 brings Ultrasound Inspection technology to a whole new level. With this one system, inspectors can perform condition analysis, record sounds, store and manage data.
With the push of a button, it is now possible to record a sound sample directly into the instrument and link it to one of 400 record files stored in the Ultraprobe.
Specialized Application Screens
Adjustable On/Off Features
Connect to External Devices
Flexible Reporting Options
|
|
|
FastTracer is an innovative portable triaxial vibration measurement and analysis solution, ideal to be used in different fields of applications such as predictive and routine maintenance, testing, structural analysis, support to research and development, diagnostics, technical assistance and didactics.
|
|
Type 107B - A, V, S vibration meter, spectrum analyzer
800 lines FFT, logarithmic/linear view.
Charge amplifier with programmable sensitivity
(use any piezoelectric accelerometer with known sensitivity).
Frequency range 2...10000Hz.
Firmware update by user. Free Windows software ConSpect.
USB interface ("Mass storage device"). FAT16 file system. 2MB memory.
NiMH accumulator, charger. Aluminum casing.
Size- 110x60x30mm.
|
|
COUGAR Portable Dynamic Signal Analyzer
* 4 to 28 input channels with ICP
* Up to 51.2 kHz sample rate per channel
* Powerful distributed Digital Signal Processors
|
|
|
The 795M is an economical portable single channel multi-function data collector and 1600 lines FFT spectrum analyzer. It is versatile for overall values measurement, bearing condition diagnostic, spectrum diagnosis and in-situ multi-plane balancing of rotating machinery (up to 8 planes of correction, up to 16 point to check vibration). It is a simple and useful device that allows for easy condition monitoring and unbalance correction of any rotating equipment found almost in every process industries. With the Windows based “ConSpect” software, it creates an easy to use, cost effective, scalable solution that meets the needs of the novice as well as advanced user. The small, rugged, and light weight IP65 design makes it ideal for any harsh industrial environments.
|
|
The Ultraprobe 9000 Kit Complete is a digital ultrasonic inspection, information storage and retrieval system that is so versatile, so easy (most operators are able to use the Ultraprobe 9000 within 15 minutes) and so much fun to operate, you'll be looking for opportunities to use it every day.
Open Platform Software
Interchangeable Modules
Frequency Tuning
Spin and ClickTM Technology
120 dB Dynamic Range
400 Memory Locations record: dB, Frequency, Time, Date, Text, Operation Mode & More
Acoustic Isolating Headphones
Environmentally Friendly Rechargeable Batteries
Superior Application Support
Easy interface for most Vibration Analyzers including: SKF, ENTEK, DLI, CSI, DI
Developed by the Industry Leader in Airborne Ultrasound
|
|
|
|
|
|
The OROS 3-series analyzers are flexible enough to handle your measurement, whatever the application. These instruments overcome most of the measurement obstacles with their wide frequency span from milliHertz to 40 kHz and the extensive 140 dB dynamic range. Thanks to these attributes, OROS 3-Series analyzers are the right choice for all your NVH activities.
Able to accurately manage all types of Tach /keyphasor, OROS 3-series analyzes rotating machinery signals with their comprehensive toolset. Synchronous order analysis and constant band order tracking reveal hidden details during speed variation. The 3D waterfall and profiles give clear overviews of coast-downs or runs-up.
Acquire, Store, Analyze and Report is your everyday work in noise and vibration tests and R&D? Automotive, Aerospace, Consumer, Industry and Energy are demanding domains where you get more and more data to measure while delays for the results delivery are getting shorter. Focusing on your time to result challenge, OROS offers breakthrough noise and vibration analyzers, the OROS 3-Series. From 2 to 32 channels these comprehensive instruments offer powerful real-time analyses associated with a disk data recorder packaged in portable and professional units.
|
|
|
|
|
|
PUMA / COUGAR Vibration Control and Analysis System
Puma Revolutionizing Vibration Testing
PUMA (Cougar for portability) utilizes Spectral Dynamics’ innovative Computer-Aided Test Suite™ (CATS) architecture. Both take full advantage of the PC’s powerful Intel processor and Windows XP technology. Optimized for multi-tasking, and founded on industry connectivity and data interchange protocols, the CATS make your entire test and validation process more timely and efficient.
Versatile Test Capabilities
The Computer-Aided Test Suite™ vibration control and analysis applications were designed to meet a wide range of test requirements. With scalable hardware and software the Vibration Control and Analysis System combines the simplicity of operation required for production screening with the power and versatility required for R&D prototype testing.
Technical Specifications
• 4 to 32 input channels with ICP
• Analysis to 40 kHz with 12,800 lines
• Scalable h/w and s/w architecture
• Powerful Multiple DSP architecture
• Comprehensive vibration test capabilities
• Extensive laboratory integration and test automation features
|
|
USB BALANCER
The solution for the detection and the correction of the unbalancing of rotatory elements. Directly linked to the USB port of the PC the USB Balancer allows in a few minutes the automatic identification of the rotary speed, the determination of unbalancing quantity and the instructions for the correct balancing. The absence of photocells and of any additional electronics guarantees the extreme handling of the product at very low costs. Furthermore, the USB Balancer allows:
- no need to do a periodical calibration
- quick installation
- triaxial acceleration reading with selection of unbalancing plane
- automatic reports at the end of measurements
|
|
The most complete and reliable solution for the full spectrum of tightness testing, leak detection and predictive maintenance.
The SDT 170 encompasses our company's vast experience in the fields of ultrasonic leak detection, tightness testing and predictive maintenance. It is robust, lightweight, user friendly and ergonomically designed. It provides a totally efficient, and simple response to proper and effective equipment maintenance and product quality.
|
|
CF-4220Z - Personal FFT Analyzer
A user friendly instrument that brings the power of FFT analysis within easy reach.
Features:
- Compact, ergonomic design and light weight.
- Easy to read 6.4" LCD
- 20 kHz real-time rate.
- Frequency zoom analysis.
- Built-in sensor power.
- Built-in 3.5" disk drive.
Specifications:
- Number of Input Channels: 1
- Frequency Range: 1 to 40 kHz
- A/D Converter: 16-Bit
- Dynamic Range: 85 dB
- Current Sensor Power: 2 mA
- Operating Temperature: 0 to 40º C
- Dimensions: 200 mm (W) x 292 mm (H) x 396 mm (D)
- Weight: Approximately 5.2 kg
|
|
|
|
|
|
VL 8000 is a high-end field balancing instrument with advanced vibration measurement, vibration analysis and machine diagnosis features.
* Features
o Intuitive operation with Windows interface
o Clear presentation of results on very large colour LCDo Very wide speed range up to 300,000 RPM
o Systematic detection of damage through envelope analysis
* Functions
o Unbalance measurement in one or two planes
o Conversion of unbalance correction into practical balancing methods (e.g. drilling)
o Frequency analysis to determine the spectral components of a vibration
o Tracking analysis to capture the run-up or coast-down of a machine and to determine the resonances
o Envelope analysis to detect damage of rolling bearings or gears
o USB port to transmit the measurement values to a PC
o Offline PC software
* Applications
o Measuring vibrations on bearings and machine housings
o Field balancing on site
o Recording the condition of rolling bearings
o Observing and recording vibration levels
o Identifying frequencies in a vibration
o Detecting resonance points and identifying transfer functions
o Detecting machine damage
|
|
The most complete and reliable solution for the full spectrum of tightness testing, leak detection and predictive maintenance.
The SDT 170 encompasses our company's vast experience in the fields of ultrasonic leak detection, tightness testing and predictive maintenance. It is robust, lightweight, user friendly and ergonomically designed. It provides a totally efficient, and simple response to proper and effective equipment maintenance and product quality.
|
|
VIBRATION INSTRUMENTATION & CONDITION MONITORING
a) VIBRATION MONITORING
A range of vibration meters such as the MV 100, MV 200, MV 400, MV 410 (B) etc. are available to measure vibrations. The MV-410 (B) is specially suited for evaluating the condition of bearings in actual operations besides vibration measurement.
A range of vibration analyzers like MV 306, MV 310, MV 320 etc. are available for vibration analysis ( frequency analysis) in addition to vibration vibration measurement. Field balancing can be done with a vibration analyzer by the use of stroboscope.
|
|
|
|
|
|
The WCA mini AD3661 - It goes where you go- Portable 4-channel Noise & Vibration Analysis System
- USB bus power unit
- 24 bit, 4-channel measurements
- A channel exclusively for tacho pulse measurements
- WCAPRO (multi analysis software)
- FFT analysis and real-time octave analysis
- Tracking analysis and throughput recording/playback
- Equipped with WCA Lite (easy-to-use analysis software)
* Configuration
Standard configuration
- AD3661 Hardware (size: 30(H) x 139 (W) x 138(D) mm, weight: 330g,
including UBS cable and power adaptor)
- WCA Pro software and license for basic FFT analysis
* Options for WCA Pro software
2D tracking license
3D tracking license
Real-time Octave analysis license
Time-series filtering license
[Features]
A portable and lightweight, USB bus powered unit
The WCA mini is small and light enough to fit into your travel case. Its actual size is Height 30mm (height) x Width 139mm x Depth138 mm (width), and weights is only 330g. Power can be supplied from athe USB bus, allowing you to perform noise and vibration analyses anywhere.
User-friendly GUI and WCA Lite with improved ease of operation
With enhanced operability, the WCA mini has adopted the same design concept employed in the highly reputed WCA. WCA Lite will enable simple operation of FFT and tracking analyses.
Complete compatibility with the CompactWCA/WCAonPC
A compatible user interface eliminates the need for additional training of existing users.
WCAPRO, multi-analysis software
WCAPRO provides real-time FFT analysis for noise & vibration testing.
Please see the AD-3661 catalog for further details.
|
|
LMS Test.Xpress Noise & Vibration Analyzer
LMS Test.Xpress is a no-compromise noise and vibration analyzer and recorder that is designed to do all of this and much more. It combines the ease of use of a traditional analyzer with the high-speed performance and measurement quality of an advanced noise and vibration measurement system.
LMS Test.Xpress integrates over 25 years of experience in noise" and vibration engineering from LMS. It is part of a complete offering of scalable testing and engineering solutions that offer optimal scalability, openness and investment protection. Start with a 4-channel analyzer today, and expand your system to a multi-channel, advanced engineering solution? It’s all possible with LMS Test.Xpress.
|
|
|
|
see the results for the following category : 
