|
|
|
|
|
|
FastTracer
• Vibration triaxial analyzer
By positioning the FastTracer directly on the test point it is possible to acquire immediately the required information on the three axes allowing the operator to save time.
•USB portable
Plug and Play device with USB connection or wireless. Thanks to MEMS technology the sensor is highly miniaturized and it can be mounted on the most critical test points.
•Powerful and cheap
The acquired acceleration data are sent to the PC that then performs the data processing through the supplied software.This solution allows the full exploitation of the computation capacity of the PC by obtaining some advantages as fare as velocity,precision and costs of the product are concerned
•Real-time analysis in time and in frequency
The included software allows the operator to do real-time analysis both in time and frequency domain (acceleration, velocity, displacement, RMS). The user-friendly interface permits the analysis viewing in the most proper and flexible way
•Off-line and remote analysis
The data acquisition can be recorded in the PC and then investigated with the same interactivity of an online viewing or it can be easily transmitted via internet both in real time or through automatic reports in Microsoft EXCEL
•Accuracy and precision of measurements
An internal autodiagnosis system always ensures the correct working of the instrument by guaranteeing at the same time the precision of the effected measurements
•High flexibility with other software
The high adaptability of FastTracer in different fields has permitted a high grade of integration with the most common control systems (LabView, CVI, etc)
|
|
- The main use of the instrument is in lubrication replenishment process.
- The instrument measures the actual lubrication level of a bearing and tells the operator when the amount of added lubricant is ideal.
- It ensures that bearings are not under or over lubricated.
- Use of this instrument decrease lubricant consumption and machine maintenance cost.
- It also display the bearing condition value.
- Built-in Stethoscope.
- Simple operation.
|
|
Vibration Supervisor DMM-4000/TGV
These field mounting devices consisting of sensor and specific transmitter prepared for preventive control of vibration in bearings of heavy machinery by means a trending system activing alarms according several criterium. These models transmit RS-485 Modbus and 4-20 mA signal proportional to the vibration speed. Optionally can transmit by Radio, Ethernet cable or WiFi.
|
|
The Ultraprobe 10,000 brings Ultrasound Inspection technology to a whole new level. With this one system, inspectors can perform condition analysis, record sounds, store and manage data.
With the push of a button, it is now possible to record a sound sample directly into the instrument and link it to one of 400 record files stored in the Ultraprobe.
Specialized Application Screens
Adjustable On/Off Features
Connect to External Devices
Flexible Reporting Options
|
|
Type 107B - A, V, S vibration meter, spectrum analyzer
800 lines FFT, logarithmic/linear view.
Charge amplifier with programmable sensitivity
(use any piezoelectric accelerometer with known sensitivity).
Frequency range 2...10000Hz.
Firmware update by user. Free Windows software ConSpect.
USB interface ("Mass storage device"). FAT16 file system. 2MB memory.
NiMH accumulator, charger. Aluminum casing.
Size- 110x60x30mm.
|
|
COUGAR Portable Dynamic Signal Analyzer
* 4 to 28 input channels with ICP
* Up to 51.2 kHz sample rate per channel
* Powerful distributed Digital Signal Processors
|
|
|
The 795M is an economical portable single channel multi-function data collector and 1600 lines FFT spectrum analyzer. It is versatile for overall values measurement, bearing condition diagnostic, spectrum diagnosis and in-situ multi-plane balancing of rotating machinery (up to 8 planes of correction, up to 16 point to check vibration). It is a simple and useful device that allows for easy condition monitoring and unbalance correction of any rotating equipment found almost in every process industries. With the Windows based “ConSpect” software, it creates an easy to use, cost effective, scalable solution that meets the needs of the novice as well as advanced user. The small, rugged, and light weight IP65 design makes it ideal for any harsh industrial environments.
|
|
|
|
|
|
The OROS 3-series analyzers are flexible enough to handle your measurement, whatever the application. These instruments overcome most of the measurement obstacles with their wide frequency span from milliHertz to 40 kHz and the extensive 140 dB dynamic range. Thanks to these attributes, OROS 3-Series analyzers are the right choice for all your NVH activities.
Able to accurately manage all types of Tach /keyphasor, OROS 3-series analyzes rotating machinery signals with their comprehensive toolset. Synchronous order analysis and constant band order tracking reveal hidden details during speed variation. The 3D waterfall and profiles give clear overviews of coast-downs or runs-up.
Acquire, Store, Analyze and Report is your everyday work in noise and vibration tests and R&D? Automotive, Aerospace, Consumer, Industry and Energy are demanding domains where you get more and more data to measure while delays for the results delivery are getting shorter. Focusing on your time to result challenge, OROS offers breakthrough noise and vibration analyzers, the OROS 3-Series. From 2 to 32 channels these comprehensive instruments offer powerful real-time analyses associated with a disk data recorder packaged in portable and professional units.
|
|
|
|
|
|
PUMA / COUGAR Vibration Control and Analysis System
Puma Revolutionizing Vibration Testing
PUMA (Cougar for portability) utilizes Spectral Dynamics’ innovative Computer-Aided Test Suite™ (CATS) architecture. Both take full advantage of the PC’s powerful Intel processor and Windows XP technology. Optimized for multi-tasking, and founded on industry connectivity and data interchange protocols, the CATS make your entire test and validation process more timely and efficient.
Versatile Test Capabilities
The Computer-Aided Test Suite™ vibration control and analysis applications were designed to meet a wide range of test requirements. With scalable hardware and software the Vibration Control and Analysis System combines the simplicity of operation required for production screening with the power and versatility required for R&D prototype testing.
Technical Specifications
• 4 to 32 input channels with ICP
• Analysis to 40 kHz with 12,800 lines
• Scalable h/w and s/w architecture
• Powerful Multiple DSP architecture
• Comprehensive vibration test capabilities
• Extensive laboratory integration and test automation features
|
|
USB BALANCER
The solution for the detection and the correction of the unbalancing of rotatory elements. Directly linked to the USB port of the PC the USB Balancer allows in a few minutes the automatic identification of the rotary speed, the determination of unbalancing quantity and the instructions for the correct balancing. The absence of photocells and of any additional electronics guarantees the extreme handling of the product at very low costs. Furthermore, the USB Balancer allows:
- no need to do a periodical calibration
- quick installation
- triaxial acceleration reading with selection of unbalancing plane
- automatic reports at the end of measurements
|
|
The most complete and reliable solution for the full spectrum of tightness testing, leak detection and predictive maintenance.
The SDT 170 encompasses our company's vast experience in the fields of ultrasonic leak detection, tightness testing and predictive maintenance. It is robust, lightweight, user friendly and ergonomically designed. It provides a totally efficient, and simple response to proper and effective equipment maintenance and product quality.
|
|
|
|
|
|
VL 8000 is a high-end field balancing instrument with advanced vibration measurement, vibration analysis and machine diagnosis features.
* Features
o Intuitive operation with Windows interface
o Clear presentation of results on very large colour LCDo Very wide speed range up to 300,000 RPM
o Systematic detection of damage through envelope analysis
* Functions
o Unbalance measurement in one or two planes
o Conversion of unbalance correction into practical balancing methods (e.g. drilling)
o Frequency analysis to determine the spectral components of a vibration
o Tracking analysis to capture the run-up or coast-down of a machine and to determine the resonances
o Envelope analysis to detect damage of rolling bearings or gears
o USB port to transmit the measurement values to a PC
o Offline PC software
* Applications
o Measuring vibrations on bearings and machine housings
o Field balancing on site
o Recording the condition of rolling bearings
o Observing and recording vibration levels
o Identifying frequencies in a vibration
o Detecting resonance points and identifying transfer functions
o Detecting machine damage
|
|
|
|
|
|
The WCA mini AD3661 - It goes where you go- Portable 4-channel Noise & Vibration Analysis System
- USB bus power unit
- 24 bit, 4-channel measurements
- A channel exclusively for tacho pulse measurements
- WCAPRO (multi analysis software)
- FFT analysis and real-time octave analysis
- Tracking analysis and throughput recording/playback
- Equipped with WCA Lite (easy-to-use analysis software)
* Configuration
Standard configuration
- AD3661 Hardware (size: 30(H) x 139 (W) x 138(D) mm, weight: 330g,
including UBS cable and power adaptor)
- WCA Pro software and license for basic FFT analysis
* Options for WCA Pro software
2D tracking license
3D tracking license
Real-time Octave analysis license
Time-series filtering license
[Features]
A portable and lightweight, USB bus powered unit
The WCA mini is small and light enough to fit into your travel case. Its actual size is Height 30mm (height) x Width 139mm x Depth138 mm (width), and weights is only 330g. Power can be supplied from athe USB bus, allowing you to perform noise and vibration analyses anywhere.
User-friendly GUI and WCA Lite with improved ease of operation
With enhanced operability, the WCA mini has adopted the same design concept employed in the highly reputed WCA. WCA Lite will enable simple operation of FFT and tracking analyses.
Complete compatibility with the CompactWCA/WCAonPC
A compatible user interface eliminates the need for additional training of existing users.
WCAPRO, multi-analysis software
WCAPRO provides real-time FFT analysis for noise & vibration testing.
Please see the AD-3661 catalog for further details.
|
|
VIBRATION INSTRUMENTATION & CONDITION MONITORING
a) VIBRATION MONITORING
A range of vibration meters such as the MV 100, MV 200, MV 400, MV 410 (B) etc. are available to measure vibrations. The MV-410 (B) is specially suited for evaluating the condition of bearings in actual operations besides vibration measurement.
A range of vibration analyzers like MV 306, MV 310, MV 320 etc. are available for vibration analysis ( frequency analysis) in addition to vibration vibration measurement. Field balancing can be done with a vibration analyzer by the use of stroboscope.
|
|
LMS Test.Xpress Noise & Vibration Analyzer
LMS Test.Xpress is a no-compromise noise and vibration analyzer and recorder that is designed to do all of this and much more. It combines the ease of use of a traditional analyzer with the high-speed performance and measurement quality of an advanced noise and vibration measurement system.
LMS Test.Xpress integrates over 25 years of experience in noise" and vibration engineering from LMS. It is part of a complete offering of scalable testing and engineering solutions that offer optimal scalability, openness and investment protection. Start with a 4-channel analyzer today, and expand your system to a multi-channel, advanced engineering solution? It’s all possible with LMS Test.Xpress.
|
|
|
The 795M is an economical portable single channel multi-function data collector and 1600 lines FFT spectrum analyzer. It is versatile for overall values measurement, bearing condition diagnostic, spectrum diagnosis and in-situ multi-plane balancing of rotating machinery (up to 8 planes of correction, up to 16 point to check vibration). It is a simple and useful device that allows for easy condition monitoring and unbalance correction of any rotating equipment found almost in every process industries. With the Windows based “ConSpect” software, it creates an easy to use, cost effective, scalable solution that meets the needs of the novice as well as advanced user. The small, rugged, and light weight IP65 design makes it ideal for any harsh industrial environments.
|
|
|
|
|
|
The OROS 3-series analyzers are flexible enough to handle your measurement, whatever the application. These instruments overcome most of the measurement obstacles with their wide frequency span from milliHertz to 40 kHz and the extensive 140 dB dynamic range. Thanks to these attributes, OROS 3-Series analyzers are the right choice for all your NVH activities.
Able to accurately manage all types of Tach /keyphasor, OROS 3-series analyzes rotating machinery signals with their comprehensive toolset. Synchronous order analysis and constant band order tracking reveal hidden details during speed variation. The 3D waterfall and profiles give clear overviews of coast-downs or runs-up.
Acquire, Store, Analyze and Report is your everyday work in noise and vibration tests and R&D? Automotive, Aerospace, Consumer, Industry and Energy are demanding domains where you get more and more data to measure while delays for the results delivery are getting shorter. Focusing on your time to result challenge, OROS offers breakthrough noise and vibration analyzers, the OROS 3-Series. From 2 to 32 channels these comprehensive instruments offer powerful real-time analyses associated with a disk data recorder packaged in portable and professional units.
|
|
|
|
|
|
PUMA / COUGAR Vibration Control and Analysis System
Puma Revolutionizing Vibration Testing
PUMA (Cougar for portability) utilizes Spectral Dynamics’ innovative Computer-Aided Test Suite™ (CATS) architecture. Both take full advantage of the PC’s powerful Intel processor and Windows XP technology. Optimized for multi-tasking, and founded on industry connectivity and data interchange protocols, the CATS make your entire test and validation process more timely and efficient.
Versatile Test Capabilities
The Computer-Aided Test Suite™ vibration control and analysis applications were designed to meet a wide range of test requirements. With scalable hardware and software the Vibration Control and Analysis System combines the simplicity of operation required for production screening with the power and versatility required for R&D prototype testing.
Technical Specifications
• 4 to 32 input channels with ICP
• Analysis to 40 kHz with 12,800 lines
• Scalable h/w and s/w architecture
• Powerful Multiple DSP architecture
• Comprehensive vibration test capabilities
• Extensive laboratory integration and test automation features
|
|
USB BALANCER
The solution for the detection and the correction of the unbalancing of rotatory elements. Directly linked to the USB port of the PC the USB Balancer allows in a few minutes the automatic identification of the rotary speed, the determination of unbalancing quantity and the instructions for the correct balancing. The absence of photocells and of any additional electronics guarantees the extreme handling of the product at very low costs. Furthermore, the USB Balancer allows:
- no need to do a periodical calibration
- quick installation
- triaxial acceleration reading with selection of unbalancing plane
- automatic reports at the end of measurements
|
|
Two-channel Analyser, Collector, Balancer, Recorder
OneProd MVP-2C is an “all-in-one” modular system designed to improve the reliability of your machines through vibration analysis.
OneProd MVP-2C is equipped with a high-brightness colour screen and its user-friendliness favours users’ comfort and productivity.
Ultra compact, 2 x 40 kHz channels + trigger input channel, for the control and analysis of vibrations in industrial settings:
• FFT analyser,
• Data collector,
• Balancer,
• DAT recorder,
• Order analyser,
• Pyrometer (°C),
• Integrated laser-sighting tachometer (RPM).
Full set of tools for the detection and analysis of bearing defects (Bearing factor, Kurtosis, Envelope) – Automatic contactless identification of the measurement point – Communication through USB, RS232 and Internet (e-Route module). Exists in intrinsically-safe mode for measurements in areas where explosion hazard is permanent (zone 0).
|
|
|
The international community has recently drawn considerable attention to occupational vibration and it's detrimental effects on the human body. In response to these new developments, Quest has released the HAVPro personal human vibration monitor and the "New" VI-400Pro real time vibration analyzer.
|
|
Description :
The Virtual Corset™ has been described as "a gentle reminder to stand up straight". A more erect posture can reduce trunk muscle activity, and may reduce the loads borne by the spinal column.
By combining an inclinometer, data logger and silent vibrating alarm in a tiny pager enclosure, the Virtual Corset™ keeps track of trunk inclination, and warns the wearer when a prescribed inclination angle limit has been reached. The clinician or therapist sets the unit's inclination limits, sample frequencies, and data save intervals using the serial port of a personal computer (PC); once programmed, the Virtual Corset may be disconnected from the PC. In the field, it performs its pre-programmed datalogging and biofeedback tasks while worn anywhere: during work, play, exercise, and rest.
|
|
C911 - precision laser shaft alignment, field balancer, two channel vibration spectrum analyzer - all in one instrument.
Laser alignment - advanced horizontal, vertical mechanism alignment
Balancing program - up to 8 planes, up to 14 points
Displacement, velocity, acceleration measurements and 6400 lines FFT spectrum analysis
Frequency and time domain measurements, enveloping detector
Versatile PC compatible file system (FAT) allows to organize data file management and report print.
Expanable memory of 1GB SD card
USB communication interface, "mass storage device"
Firmware - upgradeable by user
"ConSpect" Windows based data base and analysis software
NiMH battery, USB type charger
|
|
STAR6 Modal
The STAR6 System™ combines the latest structural analysis technology with an intuitive interface based on Microsoft Windows™. From operating deflection shapes to modal and time domain analysis, from advanced analysis of multireference parameter estimation to structural dynamics modifications, STAR6 does it all.
STAR6 Acoustics
Optimized for identifying noise sources and quantifying sound power, CATSAcoustics / STARAcoustics simplifies testing and helps you attain unmatched testing accuracy.
|
|
OOFELIE VibroAcoustics, driven by SAMCEF Field, is a Virtual Prototyping tool for the analysis and design of acoustics and vibro-acoustics situations.
Through the use of SAMCEF Field modeling capabilities, it becomes possible to start simulating the performance of such systems even before a single physical prototype is built.
Design changes can be evaluated faster and in a more affordable manner, reducing the number of actual prototypes required to achieve a required design maturity, thus accelerating significantly product development.
Thanks to such a tool, the engineers acquire a capability to isolate and analyze the effect of each parameter. With such insight available at their fingertips, information can be quickly gained to correct or improve previous designs efficiently knowing which are the influent factors.
Reduced design time, improved quality and reduced costs are some of the benefits one can now reap from using OOFELIE VibroAcoustics, driven by SAMCEF Field.
|
|
|
|
|
|
eZ-Analyst
Real-Time Vibration and Acoustic
Analysis Software for the 600 Series,
WaveBook/516E, and ZonicBook/618E
eZ-Analyst software from IOtech adds real-time continuous and transient data acquisition in the Time, Frequency, or Order domain to 600 Series, ZonicBook/618E, and WaveBook/516E systems. Today’s eZ-Analyst is the compilation of over 10+ years of continuous software development and customer inputs that results in the most versatile vibration analyzer available.
Key Highlights
• Real-time FFT analysis
• Easy-to-use graphical user interface provides
fast setup
• Field expandable from 8 to 56 channels
• Supports four separate tachometer channels
• 3D Color Waterfall Spectrum Display
• Order Normalization and Order Tracked Plots
• Multiple Plot Overlays
• View all functions simultaneously in eight display windows with up to 16 data overlays in each window
• Export your data to Excel, ME Scope, SMS Star, or UFF type 58 ASCII or Binary
• Wide selection of real-time analysis features, including integration/differentiation synchronous averaging, and much more
|
|
|
|
|
|
The Acoustics Module is a world-class solution to all your acoustics modeling needs. Easy-to-use application modes provide the tools to model acoustic wave propagation in air, water, other fluids—and even solids.
It is designed specifically for those who work in classical acoustics with devices that produce, measure, and utilize acoustic waves. Just a few application areas from the audio industry include speakers, microphones, and hearing aids, while those for noise control can address muffler design, sound barriers, and building acoustics.
The modeling of acoustics-structure interaction is easily done with the Acoustics Module. This capability is particularly attractive for appli-cations such as the design of sonar transducers in medical and non-destructive testing applications as well as those used for noise and vibration analyses.
This module also features a special interface for modeling aeroacoustics, which is especially useful for the control of aircraft engine noise. In addition, its general multiphysics ability enhances classical acoustics with further accuracy.
|
|
| ... products without technical information |
| |
|
|
