|
|
The tank and the blade are out of stainless steel.
The depth and the beat of the blade adapt automatically to the level of filling, in order not to brew the components unnecessarily. Good resistance to clogging.
Ideal for the coated components, painted, or of which surface treatment polluting east.
High rates. (For example 5000 parts/hour for a screw M4x30.) Capacity ZSE 151: 1,5l.
Possibility of adding a hopper great capacity.
Mechanical selector Weber.
System in advance on rail without silentblocs. Balanced linear rail: few transmitted vibrations, low noise level.
The system makes it possible to distribute components without head. Management integrated for distribution alone, or distribution and unit of screwing (of installation). |
|
| The LAYING can be carried out with or without efforts of installation and thus allows the automatic installation of the rivets, the axes, the pins and the pawns with a control of effort so necessary. One can notice that its design is close to that of the screw drivers. |
|
* single Shaft Assemblies (SA series) are a complete pre-engineered assembly which simplifies the use of a linear bearing system in a mechanical positioning application. Each assembly has a steel shaft pre- mounted to a black anodized precision machined aluminum support. The pre- drilled base mounting holes in the 6, 12, 18, and 24 inch aluminum supports allow for easy customer mounting. The SA assemblies come in standard lengths from 6 to 192 inches and with shaft diameters from 1/2 to 2 inches.
* Twin Rail shaft assemblies are a complete pre-engineered assembly which simplifies the use of a linear bearing system in a mechanical positioning application. The two steel shafts are mounted and pre-aligned on the common base, therefore eliminating the time consuming alignment process normally required for two seperate shafts. The pre-drilled base mounting holes in the aluminum support allow for easy customer mounting. Each 6, 12, 18, & 24 inch aluminum support has two threaded holes at one end, to assist in leveling the assembly in the final mechanical structure. The TRSA assemblies come in standard lengths from 6 to 192 inches, and with shaft diameters from 1/2 to 2 inches. |
|
The shafts support rails provide a support to the shaft and are used in combination with the housing and bearing units of open design.
All of the shaft support rails are made in aluminum alloy.
They are available in multiple versions :
- FTSN, FTSW and FTSWA for mounting from the top
- FTSU for mounting from the bottom
- FTSS and FTSC for lateral mounting |
|
CPI QUICK COUPLINGS FOR MOULD TEMPERATURE CONTROL
Straight-through standard profile CPI quick couplings
- Fast, automatic and reliable. Connect and disconnect with just one hand.
- 2 diameters (8 mm & 12 mm, full flow) offer maximum flow rates in a small body.
- Traight-through design eliminates all risk of scale buildup.
Applications :
- Mould temperature control on thermoplastic injection-moulding machines and zamak or aluminium die casting equipment.
- Cold water, refrigerated water or hot water circuits. |
|
- Quick and easy installation (even on existing molds).
- Return of the ejector plate is assured.
- Part ejector plate is assured.
- Coupling is obtained in any position, disconnecting is after the ejector plate is fully returned.
- Fast acting up to 30 strokes/minute.
- No wearing parts.
- Can be used on all injection machines equipped with hydraulic or mechanical ejection.
- Set-up time can be greatly reduced.
- Reduce noise on machines with mechanical knockouts.
- Especially suited for injection machines that do not have easy access to the ejector plate.
- Allows for center ejection to be tied in.
|
|
The Rexroth TS 2plus transfer system is a multi-talented system, which guarantees economic production. It is a diverse modular system that meets the requirements of a broad spectrum of different products.
Special TS 2plus units
Apart from the different types of conveying media (polyamide belts, toothed belts, flat top chains and accumulation roller chains), the TS 2plus also provides an abundance of specific units including curves, transverse conveyors, position and drive units. In addition to this, the time and effort spent on planning and designing can also be reduced to a minimum thanks to the predefined macro modules.
TS 2plus Heavy Duty
The new heavy-duty components of the Rexroth TS 2plus transfer system optimize transport of heavy workpieces on small surfaces. The systematic use of steel parts instead of synthetic ones in critical areas permits continuous loads up to 200 kg per meter. Reinforced conveyor profiles and stainless steel guides combined with sturdy conveyor chains open up new applications in a variety of industries.
TS 2plus Lean
Lower investment and maintenance costs, as well as fast commissioning, are the main features of the TS 2plus Lean. Its easy-to-install components are optimized for small and light products of up to 10 kilograms. Users are thus able to save up to 20 percent right from the procurement phase, as compared to conventional solutions. Low overall costs for linking manual workstations and automatic stations in the TS 2plus Lean system enable streamlined production in, for example, the automotive supplier industry, electronics industry, or medical technology industry. |
|
| ... products without technical information |
| |
A broad range of accessories necessary to the realization of systems of pulverization.
Collars of Assembly
Directional joints
Filters
Supports of Piping
Connections with Cames
Governors automatically-controlled
Reductions
Sleeves To be welded
Body of Tubes
Supports of Tubes
Fast couplers
Directional balls |
|
| Include Special-Purpose Nozzles, Air/Blow - Off Nozzles, Eductors, Mixing Nozzles, Water Wash Guns, Pipe Clamps, Swivel Nozzle Clamps, Quick Coupling Joints, Swivel Nozzles, Swivel Joints, Lances, , Filters, etc. |
|
Self-adhesive sealing tape conceived for the sealing of joints according DIN 18542. Stress condition groups
1 + 2.
Characteristics: precompressed, expansive, resistant to driving rain, permanently elastic, ecologically beneficial, open to diffusions
Advantages
- Easily applicable without special tools
- Uniform and retarded behaviour of the compression
- The joints are sealed in one sole operating cycle.
The application of primers, preparatory paintings or
maskings are superfluous.
- Uneveness within the joints is completely compensable
by its expansive properties
- No setting period
- No problems as regards laterial adhesion
- Subsequent treatments, such as back-filling or
smoothing are not necessary
- No supplementary applications of sealants
The application of joint sealing tapes is independent of weathering conditions. The choice of the appropriate tape dimensopms os decisive for its function. Please contact us.
Everywhere, when a sealing tape meets with specific requirements, which sufficiently correspond to an airtightness inferior to < 1,0 and when the stress condition groups according to the German industrial specification DIN 18542 are not demanded, it is recommendable to apply the VITO VDB joint sealing tape. |
|
Ap25
Attractive yet proven design which won't let you down.
Wide choice of specification so there's bound to be a version suited to you.
Easy to use which means your customers like it.
Value-for-money so you don't have to re-invent the wheel.
Options include dedicated international character sets and additional buffer. All units utilise Epson impact dot matrix printer mechanisms.
|
|
Ap1200 Panel Printer
'The AP1200 panel printer sets the standard for high speed panel mounting thermal printers. A unique paper reloading system makes the printer ideal for applications such as process and condition monitoring where the paper must be quickly changed and with the least disruption and complexity. Simply open the loading door and drop the paper in. Interface options available are RS232 and parallel, Seiko DPU emulation is also an option' |
|
| CABLE ASSEMBLIES, CONNECTIONS FOR LEDs, FANS, SWITCHES, ETC. |
|
Vertical LED Assemblies
5mm Narrow Profile
3mm Standard Profile
5mm Standard Profile
3mm Narrow Profile
ELM7
3mm Universal 5-hole Mount
3mm Rectangular
Universal Black Self-Retaining
Universal Natural Self-Retaining
Variable Height Vertical
Right Angle LED Assemblies
Single 5mm LED Holders
Multi-Functional Assembly for 90 ° Display
Sub-Miniature (2mm) 90 °
Single-Level 90 °
Bi-Level 90 °
Tri-Level 90 °
Quad-Level 90 °
Rectangular 90 °
3mm SMD 90 °
5mm SMD 90 °
Panel Mount Assemblies |
|
Please use the link to check our full range of Circuit Board Hardware.
We can custom mould if you require a special size or configuration. |
|
Hose mountings are installed in various kinds of aircrafts in order to settle important junction cables and interposition truns properly.
For detailed technical information please contact the technical department of GMT. |
|
Multi-component force measurement places high demands on the measuring device. The characteristics of the force vector to be measured largely determine the result. The size and direction of the force application point, as well as the dynamics, should have as little effect as possible on the process.
With the new Kistler Type 9327, 9347, 9367 and 9377 sensors, our company's established experience and know-how is now available even for multi-component force measurements carried out by the customer. The precisely preloaded measuring elements are easy to fit and, as they come ready calibrated from the factory, they can be used immediately for multi-component force measurements.
|
|
Series 261A
Triaxial 3-component dynamic force link, ICP®
- Automotive Chassis and Other Vehicle Dynamic Measurements
- Monitor Cutting Tool Forces and Detect Tool Wear
- Provide Feedback for Force Limited Vibration Testing
- Measure Input Forces for Modal and Structural Testing
- Measure Impact Forces During Drop Testing and Crash Testing |
|
The vibrating bowl WEBER constitutes the ideal solution for the small parts and the fasteners. It adapts easily to various dimensions of parts, convoyed volumes and combines reliability and profitability. Removable noise reducers guarantee the limitation of the noise and the speed of access to the apparatus. The use of materials of choice for the tank of vibrator (plastic and aluminum), the standard geometrical criteria and the specific linings make it possible to take care of the convoyed parts, to reduce the noises and to ensure the bowl a great longevity. The intelligent adjusting device ""of the vibrator maintains the bowl in excellent operating condition and makes it possible to adapt the order to the needs.
Possibilities of control:
in the hopper (control of the level of filling)
in the vibrating bowl (convenient period for the refeeding)
in the baffle (wedged discs)
in the linear rail (monitoring min/max)
in the separation device (entered of the parts)
in the system of distribution (detection of the presence of the part)
in the tube of transport (detection of the presence of the part)
upstream of the head of screwing (missing screw)
in the head of screwing (presence of the screw) |
|
| ... products without technical information |
| |
| Aquabond's water soluble thermoplastic is designed for temporary mounting of hard materials for slicing, dicing, grinding, lapping and polishing. and comes in 3 different bonding temperatures that can be purchased in either stick or bulk form. The nomenclature depicts each product's melting temperature centigrade. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
1 products in 
| |
