|
|
Power Feeds
SERVO Products Puts The Industry Standard Power Feed To Work For You
- Smoother Cuts
- Longer Tool Life
- Increased Productivity
- Available for table, cross, or knee feeds
Get a smoother surface finish, higher accuracy and better repeatability. Reduce operator fatigue and increase your productivity, while you increase tool life. With SERVO Products' electronically controlled power feeds.
Now, your class 1 manual mill can deliver semi-automated machining with superior speed regulation, ramping and dynamic braking. Plus Servo Products' power feeds feature an integral safety clutch and circuit breaker for overload protection. |
|
CPS PALLET CHANGER
The CPS pallet changer is a mechanical unit applied mainly on horizontal machining centres. The cam mechanism permits the transformation of an input rotary motion in a uniform sequence of intermittent movements of the output shaft, to which the pallet grip arm is splined.
The entire cycle composed of grip, rotation and laying of pallets is realized through a complete turn of the cam shaft.
The complete turn could take from 2.5 to 6 seconds, in accordance to the weight and the pallet entraxe.
Rotation angle of the arm for pallet gripping is usually 180°; it is also possible to project units with different angles (90°, 60°, 45°, 30°) |
|
Features:
- Best suited for batch, small and large series production
- Compact height, variable gauges
- 5-side processing possible with direct mounting of the workpiece
- numerous options (Integrated blow off, coolant drain, with mounting, clamping and position check; Integrated coupling body for compressed air and hydraulic fluid, impervious to dirt with central locking etc.) |
|
RTE ROTARY ELEVATOR
The Rte rotary elevator unit can be used in automations to slave manufacturing machines during pallets handling on automatic assembly lines or on machine tools as pallets changing.
It can be moved in two independent ways:
Indexed rotation carried out through a cam activated by a self-braking gear motor with a number of required stations varying from 2 to 48
Lifting carried out using a pneumatic cylinder having a maximum stroke equal to 50 mm.
The RTE unit is made up of a steel plate supporting a rotary table with a cam activated by a self – braking gear motor and controlled by a FCR micro switch.
Inside the rotary table there is a special pneumatic cylinder vertically moving an aluminum plate on which the needed equipment can be fixed.
The RTE rotary elevator unit is standard built with 2 main sizes:
RTE 06 P with a maximum capacity of 150 kg and compressed air pressure of 5 kg/cm²
RTE 06 P with a maximum capacity of 300 kg and compressed air pressure of 5 kg/cm² |
|
8-Series: Pallet Changers & FMS
A complete range of automation components for dual shuttle systems or FMS type installations |
|
WorkPal Compact Servo is a simple, easy-to-use pallet changer for machine tools.
The compact unit comes in several models for practically every purpose in the workshop. Both the horizontal and the vertical motions are adjustable, meaning that the robot can lift the pallet over the chip guard or tray lip of the machine. So – no need for costly modifications to the machine.
The units, which are suited for both toolmaking and series production, can produce for 168 hours a week if necessary. Further benefits include reduced operator dependence, minimised work planning and simpler NC programming. |
|
| ... products without technical information |
| |
- Provides 4-5 times the gripping force of a collet chuck
- Each taper is precision ground to a tolerance of AT3 or better!
- T.I.R. of only 0.0002" rivals shrink-fit
- Factory balanced to 10,000 RPM for high speed operation
- Constructed of special steel for maximum rigidity & finish
- All products are backed by our 100% satisfaction guarantee
Advantages:
- Provides excellent tool life and saves money by reducing tooling expenses
- Extreme holding power and rigidity for precise milling operations
- Excellent repeatability and low T.I.R. of 0.0002"
- Insert sleeves are available to fit different size tool shanks
- Fast and easy tool changes using conical screw mechanism
|
|
| ... products without technical information |
| |
| This is the most modern, rapid and flexible CNC line to punch plates. Its main features are: low-cost; easy installation; reduced dimensions; easy programming; flexibility for small/medium size pieces. Besides the multi-tool punching station, a marking tool and a drilling head are also available. The plate positioning is granted by a two-pincher coordinate table assuring high precision while processing. |
|
PG Marking, punching and drilling machine for plates and gussets
PG range: PG 83 PG 83 P PG 116 PG 116 S PG 116 P PG 2000
Simple, inexpensive and fast machines
The machines from the PG range are powerful and fast, while combining at the same time operations such as marking, punching, drilling, pop marking, deburring and tapping for working on large-size plates and gussets (up to 2000 x 1000 x 40 mm).
The layout of the clamps inside the machine gooseneck frees the working space and makes handling of parts to machine easy.
Easy programming and use thanks to the computer-assisted manufacturing softwares and the numeric control system.
The machines in the PG range are inexpensive and fast, and satisfy most requirements in a structural steel workshop. The layout of the clamps gives the operator space and safety, important factors ensuring high productivity.
|
|
All advantages given by the permanent-electro magnetic chucks combined with the flexibility of a system designed for horizontal spindle machine tools.
With Cubotec it’s easy to fix pieces with different shape and dimension, as well with surfaces bigger than clamping area, using the full strokes of the machine.
Unique characteristics of stability, rigidity and robustness are achieved by the solid block construction made from a solid block of steel.
The subsequent integration of the magnetic circuit Super-Quad into the bee-hiving structure makes it possible to leave neutral zones for an easy positioning of reference pins and stops.
Cubotec is available in 2 different configurations:
C1: 1 face with magnetic surface, the other with T-slots for conventional clamping of a-magnetic material.
C2: with both faces with magnetic surface. |
|
Plate Ø1500 - Ø1750 - Ø2000
Capacity load 10000 Kgs
Maximum speed 300 rpm
Power 30 Kw
CN Rotary table for turning and milling operations
- Use to vertical and horizontal axis
- Cast iron structure
- Mechanical drive with gears
- Hydraulic clamping
- Rotation with roller bearing
|
|
The L-743 Triple Scan Laser Alignment System is one of only 2 lasers (the other is the L-733) in the world to offer 3 automatically rotating laser planes that are accurate enough for today's ever-increasing tolerances. This creates a powerful tool to not only MEASURE but also FIX problems in a fraction of the time needed with conventional methods. From machine tools to aircraft assembly, the L-743 is the best alignment system on the market today.
|
|
| ... products without technical information |
| |
Types of lamella
We use three basic forms to fasten the lamellas. The different product types and their designations result from these three basic forms of fastening. The product types FASTAF/FASTAC have fixed mounted lamellas. Flexibly mounted lamellas are used in the FASTAM/FASTLAP product types. These flexibly mounted lamellas are offered in two different versions, according to the conditions of use with hinge 2) or clip 3). It is also possible to choose between versions of the hinge type with or without initial tension. |
|
Bellows
Arnold bellows offer safe protection for both people and machinery. These are the products to soke your problems - in which material, stability and shape can be individually customised.
If the bellows will be subjected to high mechanical stress and strain, the telescopic covers provide safe protection even at high processing speeds. Due to our patented mounting system, the telescopic covers will either be flexibly mounted or connected with the bellows without the use of adhesive materials under consistent counter pressure, if required and can also be coolant-compatible, if this is desired. |
|
BUWW's founder and our design engineers bring years of experience and innovation to way cover construction. We understand that each application is a little bit different and therefore, each cover's design and construction must reflect each specific detail requirement.
We understand our customer's need for a quality cover at a reasonable price. To accomplish this, we have invested in a new state-of-the-art facility with leading edge equipment including our new Mitsubishi LV Series CNC Laser and Fischer 200 ton CNC Press Break to accurately turn our CAD design drawings into precision products.
-Custom engineered designs to meet customer specifications
-CAD/CAM interface for laser cutting and precision bending operations
-Skilled engineers, and experienced welders and assemblers ensure quality workmanship in all phases of construction
-Barcoded routing sheets speed production and delivery
-Our custom developed quality control and assessment program contributes to our high level of customer satisfaction |
|
| ... products without technical information |
| |
Extra small turning tools which cover holes down to 1 mm diameter. CoroTurn XS tooling solutions for internal turning, grooving and threading bring all the performance of CoroTurn down to smaller bores than ever, in a design conceived with small part machining.
The program comprises four sizes, CXS-04, -05, -06 and -07, each including inserts for a range of hole diameters, and available in different lengths to suit different applications.
These inserts fit into boring bars designed with internal cutting fluid supply, directed at the cutting edge via two nozzles to ensure chip evacuation and sufficient cooling. Boring bars range from 10 to 25.4 mm diameter.
The inserts locate precisely into the boring bars thanks to a locating pin, which guarantees correct positioning of the cutting edge, every time.
CoroTurn XS is designed for high precision small part machining in sliding head-stock CNC machines within the automotive, watch, connector and medical industry. |
|
CC6065 and CC6060
New round inserts offer the perfect team for success in medium to roughing operations used mainly for the aerospace industry. Round inserts in grades CC6060 and CC6065 increase the available HRSA cutting tool assortment from Sandvik Coromant, while also bringing the advantages of ceramic grades which are able to run at 4-6 times the speed of conventional carbide inserts. CC6065 is the ideal solution for high temperature alloy machining on good quality forgings with some ovality. Improved machining results through increases in feed rate can be achieved with a stronger insert and edge line to elevate component quality. CC6060 is optimized for productivity benefits when it comes to larger diameter components and longer lengths of cut. With its excellent notch wear resistance, this grade also provides the confidence to machine at higher depths of cut than other ceramic grades currently available and is able to cope with higher feed rates
Xcel
A radical new tooling solution for machining of titanium alloys and heat resistant super alloys materials is now being introduced by Sandvik Coromant. The new and patented Xcel tool provides a host of design advantages when semi-rough turning into shoulders, not previously available from a single tool. |
|
A radical new tooling solution for machining of titanium alloys and heat resistant super alloys materials is now being introduced by Sandvik Coromant. The new and patented Xcel tool provides a host of design advantages when semi-rough turning into shoulders, not previously available from a single tool.
Xcel features the accessibility and easy programming of an 80 degree insert along with reduced wear compared to a square insert used at 45 degree entering angle.
- Reduced notch wear and faster cutting speeds than rhombic inserts
- Ability to machine into corners to produce complex shapes
- Greater accessibility in confined spaces
- Possibility to machine in two directions
- Reduced radial forces and constant chip thickness compared to round inserts
Two insert sizes are now available to suit depths of cut from 0.5 to 3 mm in intermediate stage machining. They are offered in three grades, all proven performers in ISO S materials. |
|
Extra small turning tools which cover holes down to 1 mm diameter. CoroTurn XS tooling solutions for internal turning, grooving and threading bring all the performance of CoroTurn down to smaller bores than ever, in a design conceived with small part machining.
The program comprises four sizes, CXS-04, -05, -06 and -07, each including inserts for a range of hole diameters, and available in different lengths to suit different applications.
These inserts fit into boring bars designed with internal cutting fluid supply, directed at the cutting edge via two nozzles to ensure chip evacuation and sufficient cooling. Boring bars range from 10 to 25.4 mm diameter.
The inserts locate precisely into the boring bars thanks to a locating pin, which guarantees correct positioning of the cutting edge, every time.
CoroTurn XS is designed for high precision small part machining in sliding head-stock CNC machines within the automotive, watch, connector and medical industry. |
|
|
|