|
|
Electronic roller feed units
Dreher roller feed units stand out for high precision and constant feed exactness at a high dynamic force. Roller feed units can be delivered for a strip width until 2000 mm and a strip thickness from 0,1 to 10 mm for co-ordinated roller diameters.
Pneumatic strip feed units
The cost-effective well-tried alternative to roller feed units disposing of an integrated sequentiell phase control and guaranteeing easy installation, precision and product assurance. These units can also be used for foils, sensible strip material, stripe and wire profile material.
Number of strokes: 1200 1/min
Precision: +/- 0,025 mm
Minimum set-up times by easy adjustment
Easy strip insertion
Mechanic intermediate release device
Feeder with linear motor
High precision feeder for very large strokes and for more flexibility in the production.
Particularly suitable for:
- the feed of three dimensional parts
- Large strokes
- For sensitive and coating strips
- Flexible feed length
|
|
|
|
|
|
DIMECO roll feeder range results from a combination of 5 mechanical models and 3 numerical control packages. They fulfil your needs for strips from 0,1mm to 10 mm thickness and up to 2000mm wide.
Cutting edge roll performances are reached thanks to an optimized inertia to reach up to 1000 rpm and 150m/mn. Rolls are hardened, chromed and sand blasted for a better grip.
The use of a comprehensive electronic package (sensors, motors, controls) provided by the same supplier selected among worldwide leading O.E.M. provides outstanding positioning accuracy and reliability (+/- 0,05mm).
You can select the HMI that most fits your needs: simple but efficient with ECODRIVE, sophisticated with SIMOSTAR370, which offers access to the entire operating and maintenance data on a 12” colour touch screen.
With PFS and ADA functions, feeding line machines speeds and accelerations are synchronized according to press rate, feeding angle and pitch. Material strains are therefore avoided, loop length may be reduced and machine lifetime is increased.
Built-in electronic cams and active safety device controls are programmed directly from the feeder terminal.
|
|
Roll feed systems from ARKU guarantee high feed and repetition accuracy. ARKU produces them in two series for all strip cross-sections.
ARKU has developed the feed series ServoMaster® PowerMaster® as successful solutions based on its many years' experience with successful sheet shaping installations.
|
|
Minster Roll Feed Standard Features
• Free Standing Feed Cabinet with Shock Isolation Mounts or Compact Press-Mounted Design
• Hardened and Ground Feed Rolls
• Proportional Drive System with Low Inertia Belt
• Dual Roll Drive with Precision Anti-Backlash Gearing
• Adjustable Passline Height
• High Efficiency Pneumatic Roll Lift Design
• Adjustable Stock Guides
• Photo Electric End of Stock Detector
• Digital Servo Motor and Drive Control
• Feed Operator Interface Through PMC Control
• Hand Held Feed Set-Up Pendant
• Integrated Coil Line PMC Control
• Machine Finish
• Heavy Cast Frame
• High Efficiency Pneumatic Roll Lift (425 spm)
• Chrome Blast Roll Finish
• Cascading Roll Catenary with Stock Guides
• Allen Bradley Ultra 5000 Drive
• Allen Bradley MP Series Low-Inertia Brushless Servo Motors
• Cutler Hammer Panel Mate Operator Interface, PMC Control
• Allen Bradley Panel View 300 Operator Interface, Basic Retrofit
|
|
Roller conveyer with stop -and measuring systems.
Working length 2,70m, on left hand side of machine.
Roller width 200 mm.
Special versions upon request.
Strong self supporting steel legs.
Sturdy carriage with the additional possibility of swinging away the stop for very short or extraordinary long pieces.
Positioning control by servo drive on sturdy carriage guarantees for an optimum in accuracy.
The positioning control units calibrate themselves.
Positioning systems with Piccolo electronic and industry PC have universal possibilities in data input, data transfer and data output.
|
|
This system is made up of two roller conveyors. The rollers are covered with an elastic PVC sleeve. One conveyor receives the sheet while the other evacuates the finished material. The silent traction of the rollers is by means of a traction-belt.
The first conveyor has a pneumatic stop and is equipped with a lifting system which positions the sheet on its longest side. Gravity centres the sheet on its short side. The arms of the lifting system have built-in rollers which position the product to be withdrawn by a robot.
|
|
|
|
|
|
Roll feeder for high precision in feeding and high speed strokes.
A-WVS roll feeder series
have been developed to achieve high precision in feeding and high speed strokes. This garanted by large dimension of feeding rolls, which are pivoted in bearings without clearance. Drive force is supplied from AC-Motor, which provides the drive for upper and lower feeding rolls through pre tensioned gears mechanism
All gears are hardened and surface grinded.
The upper feeding roll can be lifted with support of pneumatic or hydraulic drive. This attachment can be used for to intermediate lifting as well.
The feeding length are freely adjustable. Different stepping modes can be choosen.
The roll feeder sytem is because of high feeding power and solid design prefered to be equipped with roll straighteners. Band cleaning and lubricate units can be added as well.
Wanzke first develeoped this roll feeder system AC-motors driven.
This roll feeder are used on new presses or as optimization of normal presses in use to increase the productivity.
Further applications: Cut to length lines , sheet production for transformer
Technical data:
Thickness of material: from 0,1 up to 20 mm.
Roll feeder sizes from 50 up to 1800 mm
|
|
| ... products without technical information |
| |
Brand Name:
EBI
Country of Origin:
China (mainland)
Key Specifications/Special Features:
The range of model number:
1st generation hub unit
2nd generation hub unit
3rd generation hub unit
with ABS rings/ABS wire sensors/ABS hall type sensors.
Good life performance
|
|
Brand Name:
EBI
Country of Origin:
China (mainland)
Key Specifications/Special Features:
Wheel hub assembies with ABS sensors,and accessories like oil seals,nuts,circlips,pins,O rings,etc.
Good life performance
For most of car models
Primary Competitive Advantages:
Price
Quality Approvals
Full solutions for maintenance
Main Export Markets:
Worldwide
|
|
Back-up roller for cluster mill, multi rows bearings for rolling mill, back-up roller for straigthening machinery, chain conveyor’s bearing, customized according to the customer’s need.
Back-up roller for cluster mill.
High load capacities, rotary speed, accuracy and reliability to obtain always the best quality of metal sheets, minimizing plant’s cost.
Back-up roller for straightening machines.
Bearings and back-up roller for working rollers to guarantee always the best quality of the metal’s sheet.
The Unitec bearings can be customized with low friction seals, grease nipples, sealing air, according to the customer’s need.
|
|
|
|
|
|
RKB multi row bearings have low cross section, high load carrying capacity, stiffness and are used for metal rolling equipment in mills.
They are of separable design that considerably simplifies mounting, maintenance and inspection.
They can tolerate moderate to high shaft speeds. The rollers and outer races are carefully matched to ensure the best load distribution.
Inner rings (designation L) are interchangeable with other assemblies (designation R).
They have cylindrical bore and some sizes are also available with tapered bore.
The use of them in metal rolling mills exposes them to very heavy stresses.The rings and rollers can be manufactured with very high quality case hardened carburizing alloy steels. Deep case depth and special heat treatment ensure superior size stability, fracture toughness and reliability.
Where the bearings are mounted with a loose fit on the roll neck, RKB multi row cylindrical roller bearings have C2 internal radial clearance and are supplied with a helical groove in the bore and/or lubrication grooves in the side faces of the bearing rings for the efficient lubrication (e.g. suffix AC).
RKB produces the multi-row cylindrical roller bearings in several construction.
The various designs differ basically in the number of inner and outer rings, in the number of loose or integral flanges on the outer ring, in the cage type, and in the number of rollers in the cage pocket.
Furthermore, on order, RKB can produce the bearings sealed at both sides by radial rubbing seals or with wider inner ring.
They are produced with the normal precision grade for roll neck bearings, conform to class P6 for dimensional and running accuracy to ISO 492.
|
|
We offer folling Wheel Hub Units for various brand cars, Such as GMC, Volkswagen, Nissan, Opel, Fiat, Buick, Ford, Chevrolet, Chevrolet, Oldsmobile, Ponitiac, Dodge, Comanche Grand Cherokee, Jeep Grand Cherokee, Cadilac, Acura, BMW, Benz,
Hyundai, Toyota, Honda, Acura, Honda, Toyota, Mazda, Nissan, Infiniti, Subaru, Chryslet, Mitsubishi, Mazda, Isuzu, Daweoo, Kia, Volve, Jetta, Citroen, Peguent etc.
|
|
Wheel bearing kits:VKBA 502, VKBA 504, VKBA 505, VKBA 506, VKBA 508, VKBA 510, VKBA 513, VKBA 516, VKBA
517, VKBA 518, VKBA 519, VKBA 523, VKBA 526, VKBA 532, VKBA 559, VKBA 612, VKBA614, VKBA 625, VKBA 626, VKBA 627, VKBA 654, VKBA 655, VKBA656, VKBA 658, VKBA661, VKBA 662, VKBA 664, VKBA 371, VKBA 686, VKBA 708, VKBA 709, VKBA 717, VKBA732, VKBA 733, VKBA 740, VKBA 741, VKBA 742, VKBA 743, VKBA 754, VKBA 756, VKBA792, VKBA 826, VKBA 828, VKBA 829, VKBA 830, VKBA 836, VKBA 838, VKBA 844, VKBA845, VKBA 846, VKBA 847, VKBA 848, VKBA 849, VKBA 897, VKBA 898, VKBA 914, VKBA916, VKBA 917, VKBA 918, VKBA 919, VKBA 920, VKBA 921, VKBA 938, VKBA 940, VKBA941, VKBA 959, VKBA 961, VKBA 966, VKBA 968, VKBA 969, VKBA 976, VKBA 1314, VKBA
|
|
Four-row and six-row cylindrical roller bearings are used almost exclusively in the metal industry. Their friction is relatively low when compared with other roller bearings. As they are normally mounted with an interference fit on the roll neck, they are particularly suitable for rolling mill applications where the rolling speed is high.
Since very many rollers can be incorporated, the radial load carrying capacity is exceptionally high. Multi-row cylindrical roller bearings are unable to accommodate axial loads but they can be mounted together with deep groove or angular contact ball bearings or with tapered roller bearings to help accommodate any axial loads.
|
|
|
|
|
|
Tapered Roller Bearings:-
Type E-XTRA Available in flange or steel housed pillow blocks for selected sites, Type E-XTRA high capacity tapered roller bearings are stocked in all configurations. With interchangeable mounting dimensions, Type-E allows for easy upgrade from ball bearings at a moderate cost.
Type K Durable twin row tapered roller bearing with spring locking collar and a variety of mounting styles.
Double Interlock Durable twin row tapered roller bearing with double spring lock collars and a variety of mounting styles.
TAF Tapered roller bearing dimensionally interchangeable with SAF style pillow blocks. Installation ready.
E-TECT Seal Kit Add-on combination R seal/V ring sealing system for Type E, Double Interlock, Type K, & TAF bearings. One kit consists of one collar, special set screws & seal.
Type C Rugged tapered roller bearing available in a variety of housing styles.
Special Duty Duplex tapered roller bearing with tapered adapter sleeve mounting. Available in a variety of housing styles.
Hinged Cap Same features as Special Duty plus a hinged cap pillow block for quick replacement of bearing unit.
Traction Wheel Hub Assembly with tapered roller bearings for use with overhead chain conveyors.
All Steel Cast steel housing with duplex tapered roller bearings available in Pillow Block or Cartridge units.
Pictured Item Description:-
Durable twin row tapered roller bearing with spring locking collar and variety of mounting styles.
Features/Benefits
Reduced length through bore allows installation in tight spots. Split cast iron housing with replacement bearing insert units available. Self-aligning.
|
|
Self-Aligning Tapered Roller Bearing
Offers Important User Benefits
Cost Reduction!
Advantages Not Found in One-Piece Housing
|
|
| ... products without technical information |
| |
Dura-Sleeve return idlers are a patented abrasion resistant urethane sleeve that is easily clamped on any existing or new rubber or urethane disc return idler shaft.
* Patented Design - of our idler sleeve clamping system utilizes you to replace worn out rubber or other urethane disc return idlers.
* Abrasion Resistant Urethane - compounds provide wear ability that exceeds 5 times the wear life of standard rubber disc return idlers.
* Meets all CEMA Standards - and available in any belt width and inside and outside roller diameter.
|
|
| ... products without technical information |
| |
 see the results for the following category : Ball screws |
|
|
