|
|
|
The line is particularly indicated to solve vibration problems. According to the sectors of use Martin gives the possibility to choose the right solutions among plastic, steel or stainless steel component. Applications: injection presses , machine tools, typographic machines, vibrators a.s.o.
|
|
The OSM-Series mount is designed for use on machinery that does not require fastening to the floor and where stringent demands are imposed on effective vibration damping and the reduction of troublesome noise emitted from machinery and equipment.
It has been designed with the aid of FEM analysis, which prevents
fatigue from fast working cycle times and strong lateral forces in heavy machinery.
The reinforced leveling bolt support cup distributes machine loads to
the support points within the mount. The leveling element provides
direct and reliable machine mounting to suit most installation needs.
Vertical as well as horizontal forces are dampened out by
the integral nitrile pad, which also provides chemical resistance
to most fluids.
A tried and tested design with good leveling characteristics
makes the OSM-Series the natural choice for the majority of
machine types used in industry.
|
|
|
The line is in galvanized and stainless steel material and matches both characteristics of good price and quality; it could be used as a valid alternative to the polyamide base line. The recent version with vulcanized rubber allows the use of this line in the food industry. Applications: food, ceramic industry and handling machineries in general
|
|
- Stainless steel base in 1.4301 (1.4401on specific request). On request anti-slip rubber 70 shore.
Stainless steel screw in 1.4301 (1.4401on specific request). The leveling element could be supplied, on request, with steel nut.
- Load values above mentioned have to be considered referring to static conditions calculated at the half of the screw length. In
conditions of vibrations or in presence of dynamic loads these values should be reduced.
|
|
LEVELING FEET
STUD LEVELING FEET
Rubber Pad Covers
Jig Feet Leveling
Jig Feet Leveling Assemblies
Threaded Tube Ends Round
Threaded Tube Ends Square
|
|
Aluminum profile system---export world wide
We can offer the best China-made aluminmum extrusion profile and accessories of MODULAR ASSEMBLY SYSTEM, including 20mm, 30mm, 40mm,45mm,50mm,60mm profile and connection elements, fasteners(t-nuts, t-bolts, subsequent nuts etc.), leveling feet, hinges.
We have ten years of experience in this field and got a well reputation in Chinese market. Since the year 2008, we begin to step into International market. If you are interested in our products, please do not hesitate to contact us, we will surprise you with best quality but most competitive pricese.
|
|
Sunnex LL series - Leveling Mounts
Sunnex LL leveling mount are ideal for loads of up to 2000 kg. The LL-Series has a solid base design fitted with an anti-slip pad.
The precision ball and socket design of the swivel connection provides a smooth low friction interface from the equipment to the floor.
Advantages:
Articulated bolt allows inclination up to 10°
With anti-slip rubber protection for stable installation
Made of galvanized steel
Withstands loads up to 2000 kg
Applications:
Assembly Stations
Compressors
Office & Household Machinery
Outside Maintenance Equipment
Small Machines
Woodworking Machines
|
|
|
An exciting new addition to the WDS range are levelling feet which are available with options of a 303 or 316 grade stem and base or an option of a plastic antimicrobial base ideal for those wash down sensitive areas as it has good chemical resistance
|
|
Jacmount Adjustable Levelers
These easy to use jacmounts are recommended when holes or threads are provided on machine feet. When practical, Airloc GLV/GLR's with the proper pads are a good economical alternative.
Pad Type
716 Machine tools, plastics, textile machines, graphics machines
915 High load, best level stability
706 Good level stability and non-skid properties
B1 Very good active and passive isolation of mechanical vibrations, for example, for measuring instruments and machines affected by outside vibrations
Made in cast iron or Reinforced Thermoplastic Design.
Bolt-on, can be leveled from top or bottom
Safe and stable due to patented studs
Machines run smoothly with Airloc/Biloc pads for any application
Stud is attached in the PR leveler, but not rigidly, accommodating up to 4 deg. of floor inclination
Stud (type O-S, O-T and U) to be selected separately
|
|
Standard Duty Leveling Foot: Standard duty leveling foot 1/2 - 13 thread. For leveling standard frames and gantries.
Specifications:
- Material: Black plastic base, steel galvanized stem & nut
- Maximum Load - N (lbs.): 6677 (1500) Vertical
|
|
ART. P814
SOLID MOUNTING FOOT
MATERIAL:
Reinforced polyamide.
Oils and greases resistant.
SURFACE:
Satin.
COLOUR:
Black (RAL 9011).
INSERT:
Zinc plated steel articulated, threaded stem.
SPECIAL REQUESTS:
• It is possible to supply the inserts with different
lengths, on request and for quantities.
• It is possible to supply colours as shown in the
table at page 7, on request and for quantities.
|
|
A wide assortment with many different variants offers Ganter in Furtwangen (Germany). So you can find in the product range levelling elements made of steel, stainless steel. plastics or combinations like plastic/steel.
Levelling elements with vibration absorption optimise an interesting product-portfolio.
|
|
|
The infinitely adjustable feet are suitable for structures of all kinds.
|
|
|
Leveling components in polyamide reinforced by fiber glass that with the internal structure of the foot grants the distribution of static loads in all security. Applications: automation, conveyor systems, packaging, work-desk, aluminum structures a.s.o.
|
|
STAINLESS STEEL Line/
This line is particularly indicated to all industry, where hygienic rules have to be respected. Applications: pharmaceutical, chemical, nuclear, enological, dairy and food industry in general.
|
|
ELESA vibration-damping levelling elements have been designed to damp vibrations, shocks and noise produced by moving bodies or non-balanced vibrating masses of equipment and machines which can cause:
- malfunction and reduction of the machine lifespan and/or of the adjacent ones
- damages at men’s health
- noise.
LW.A are made up of three main elements: zinc-plated steel base with natural rubber disk, zinc-plated steel levelling disk and threaded stem to allow an easy and precise levelling of the machine.
Vibration-damping levelling elements are available in the following diameters: 80 - 120 - 160 and 200 mm.
|
|
Range of Applications:
- processing centres
- transfer machines
- industrial robots
- special purpose machines
- plant construction
Characteristics:
- large adjustable range
- exact leveling by using fine thread
- charging from 500 da/N up to 4.000 da/N
- with or without vibration isolation
- for free-standing or srew-on type machine assembly
- cost-efficient assembly method
|
|
|
The VIBROSTOP TSGE damper is the best choice for isolating disturbing machines that are not to be fixed to the ground, and do not risk toppling over because of the favourable ratio between height of centre of gravity and base area.
|
|
Isomounts provide an efficient and economic method of installation of a wide range of machinery and equipment. Machines can be installed and accurately levelled without bolting down or grouting. Machine performance is improved through effective shock and vibration isolation and damping.
Typical applications include:
- Compressors and Pump Sets
- Diecasting machines
- Diesel Generators
- Hydraulic Power Packs
- Injection Moulding Machines
- Packaging Machinery
- Presses: Forging, Hydraulic and Mechanical
- Rubber Machinery
- Testing Machines
|
|
|
The VIBROSTOP TSZ damper was designed for the isolation of large machinery, with significant weight and unfavourable ratio between the height of the centre of gravity and the base area, without fear of their falling. Loads range from 2000 to 20000 daN.
|
|
UNISORB® Novibra®¹ Anti-vibration Mounts
The Novibra® product line includes various rubber to metal bonded anti-vibration mounts. Natural rubber is used, generally loaded in a combination of shear and compression to achieve the most effective levels of vibration isolation and to ensure long life for the mounts and machinery mounted on them.
UNISORB® Novibra® Mounts are available in a wide range of shapes and sizes which vary according to the application. Many models are available from stock.
|
|
Precision, height adjustable, vibration damping machine mounts for accurate, efficient and economical machine installation
Typical applications:
Machine tools, rubber and plastics machinery, printing and packaging machinery.
|
|
Description A swiveling leveling foot for stable positioning on uneven floors
Material Die-cast zinc
Surface Black powder coated (other surfaces on request)
Pack Quantity 10 pieces
|
|
|
Leveling components can be used with our leveling casters or used independently. They are available in a variety of sizes and materials and feature a specially contoured ball socket that substantially reduces friction for ease of adjustment. Hex sockets are available for overhead adjustment and stud lengths can be customized.
|
|
Glass-fibre reinforced polyamide based (PA) technopolymer. Resistant to solvents, oils, greases and other chemical agents.
No-slip disk
NBR synthetic rubber, hardness 90 Shore A.
- LV.A: without no-slip disk.
- LV.A-AS: with no-slip disk, supplied assembled, reinforced with a zinc-plated steel plate and fixed by means of two screws.
|
|
EA LEVELING GLIDE (PARTS SEPARABLE)
BODY and BASE: Dark Grey ABS
BOLT: Chromate
Please visit our website or PDF catalogues for further information about this and similar products.
|
|
|
Skiffy has an extensive range of feet and buffers to apply on machineries, furniture and other applications where a secure leveling is needed. Our buffers provide protection and a neat finish of your furniture whereas our adjustable feet give a stable presentation.
|
|
UNISORB® LEVEL-RITE® Mounts :
UNISORB's new patented LEVEL-RITE® Mounts have been engineered and tested to accommodate the needs of a broad spectrum of machinery. From small chipmaking mills to larger machining centers, LEVEL-RITE® Mounts provide machine installation solutions for leveling, aligning and vibration isolation. The all new design provides industry with a higher standard for adjustment range, durability, and function.
Unparalleled Adjustment Range :
LEVEL-RITE® Mounts provide the greatest adjustment range in the industry. Every model size in the UNISORB® LEVEL-RITE® Mount line provides an overall adjustment range of 1 3/8 inches, nearly triple the industry average. The mounts are available in seven standard models to provide an extensive range of size and configuration.
|
|
Japanese manufacturer, Sugatsune, has a wide range of machine feet and casters.
For more information about this and other similar products, please visit our website or view the PDF catalog files here.
sugatsune.co.jp (Sugatsune Japan)
sugatsune.com (Sugatsune America)
sugatsune.net (Sugatsune America-Industry)
|
|
|
|
