|
|
The CLB series LED bar light provides longer service life with lower power consumption and less heat generation than conventional fluorescent lamps.
* 24V DC (No polarity)
* Light lengths available in 100mm, 200mm and 332mm.
* LED colors available in clear/white, red and amber.
* 300lx luminous intensity at 50cm. (CLB-24N-C type)
* Light does not contain infrared or UV rays, which radiate heat and damage materials.
* Stable illumination over wide operating temperature range from 30°C to 60°C.
|
|
The CLF series high power LED work lights in various lengths and colors provide long service life and maintenance-free operation.
* 24V DC (No polarity).
* High power 1,700lx illumination* for precise work operation. (*Luminous intensity at 50cm, CLF20-24-C type)
* Light length available in 130mm and 230mm.
* LED colors available in red, amber and clear/white.
* Water and dust-proof IP67 construction.
* Light does not contain infrared or UV rays, which radiate heat and damage materials.
* Stable illumination over wide operating temperature range from 30°C to 60°C.
|
|
The CLT series IP66G/IP67G rated oil and water resistant LED light bar for the extreme use environment.
* High power LEDs provide long service life, maintenance free operation, low current consumption as well as low heat generation which cannot be realized by conventional fluorescent light.
* Uniform light distribution at the high luminous intensity of 500lx at 50cm with 16 high power white LEDs.
* Ideal illumination for the workplace inspection light as LED illumination does not emit the flicker or stroboscopic effect.
* 24V DC (No polarity).
* IP66G/IP67G construction with robust aluminum body and tempered glass cover.
* Light does not contain infrared or UV rays, which radiate heat and damage materials.
* Stable operation over wide temperature range from -30°C to 60°C.
* Three wiring options available depending on the installation;
1. CLT30-24S-CD: Side wiring type
2. CLT30-24L-CD: Multi-drop wiring type
3. CLT30-24T-CD: Terminal block wiring type
|
|
Highlights HLWQE 1
- No maintenance costs for 5.7 years! (50,000 h useful life at 700 mA - Decrease in luminous flux about 70%)
- Hart-coated aluminium housing for improved wear and corrosion protection
- Protection from electrostatic charge and polarity reversal
- Choose between spot or area light
- Special lens holder for maximum luminance
- Insentive to vibration and temperature changes
|
|
|
|
|
|
FLAT LED - LED Flood Light
FLAT LED - A machine luminaire with minimal height, maximum luminous power and intelligent PLUG + LIGHT electronics, which allows direct connection to 24-volt direct or alternating current. The impressively flat design is the result of innovative Waldmann optics technology. It produces a beam angle of 60º, which ensures large-scale, uniform illumination of the processing area. As a result, process reliability and productivity are increased.
Characteristics:
* FLAT LED - maximum light with minimum height - perfect for machines with small installation space.
* Intelligent PLUG + LIGHT electronics, which allows direct connection to 24-volt direct or alternating current.
* PLUG - fast installation, thanks to integrated LED operating device.
* LIGHT - safe operation without stroboscopic effect and minimal heat build-up.
* High-performance LEDs with a service life of 50,000 hours.
* Available in FLAT LED mounted / integrated version.
* Absolutely waterproof - system of protection IP 69K.
|
|
SPOT LED 003. PLUG + LIGHT
Waldmann underscores its claim as an innovation leader with the new machine luminaire SPOT LED 003:
- No stroboscopic effect.
- Intelligent circuit board.
- No heat generated in the direction of the light beam.
- Depending on the application, the SPOT LED 003
can be flexibly used as either a spot or area light.
- Service life up to 50,000 hours or around 6 years of continous operation.
- Insensitive to vibrations and knocks.
- High blue proportion in the light of the LEDs promotes
concentration and motivation.
- Compact dimensions.
|
|
LED Machine Luminaire SLIM LED
The SLIM LED is the lighting solution for machines and equipment with space-constraints and limited installation space.
The sleek profile of the luminaire is not one millimeter higher and wider than necessary.
The luminous power, in contrast, is tremendous. SLIM LED luminaires are
equipped with the latest LED technology.
This allows large-scale and powerful illumination of machine workplaces.
In addition, the light emission direction can be individually adjusted.
SLIM LED luminaires are available in lengths ranging from 196 to 1176 mm - flood lighting made to measure.
|
|
|
|
|
|
FLAT TEC - More freedom for your engineering
FLAT TEC is the new generation of machine luminaires, which are considerably flatter than all comparable systems. This not only allows for greater engineering freedom, but also meets the demands for a contemporary design. In addition, they offer further benefits, such as clearly higher light efficiency, easy integration, considerably longer maintenance intervals, and lower service costs.
FLAT TEC characteristics:
* More freedom - thanks to the flat profile, the entire machine compartment is accessible.
* More light with equal energy consumption - modern T16 light tubes produce considerably higher luminous flux rates than comparable lamps, are shorter and have a smaller diameter.
* Easy integration - The luminaire is connected easily and safely via a plug connection.
* An intelligent thermal management system significantly increases the service life of lamps and operating devices. The benefits are longer maintenance intervals as well as reduced spare parts and service costs.
* Robust design for the toughest requirements - Anodized metal housing made of aluminium. 100-percent leak-proof through special corner seals, resistant to conventional coolants and lubricants. High strength and stability due to 4 mm thick safety glass.
* Absolutely waterproof – IP 69K protection class, pressure jet-tested up to 100 bar.
|
|
|
Waldmann inspection luminaires are always used when colors, surfaces, and material quality need to be checked visually. In addition to their use in printing, inspection lights are essential also in many other areas.
|
|
| ... products without technical information |
| |
Honeywell's Hobbs range of halogen and Xenon, high intensity discharge work lamps are designed for use in heavy construction and farming equipment. These lights are designed to withstand harsh environmental conditions such as sudden temperature change, shock and vibration.
High intensity discharge (HID) technology is significantly more efficient than halogen and produces more light with less amperage draw. The technology allows equipment to operate more safely with less load on the electrical system resulting in optimum alternator and battery life.
Honeywell's marine lamps are completely weatherproof. They are totally sealed against moisture ingress and the mounting hardware is stainless steel to prevent rust and corrosion.
|
|
Nordic flushmount (built-in) work lights
Nordic Flushmount lamps are incorporated in the construction of the machine. Flushmount is especially designed for equipment with little space. The flat construction of Nordic Flushmount lamps enables easy mounting and they are suitable for all kinds of machines. As with all other Nordic Light products built-in work lights are available with either HID or halogen technology.
|
|
Nordic HID work lights (Xenon)
The Nordic HID (High Intensity Discharge) lamps are designed to withstand the demanding requirements of the mining, forestry, drilling and earth moving industries. Xenon tubes are considerably brighter than ordinary halogen bulbs, which mean that the use of HID lamps saves the alternator and fuel. HID lamps generate less heat, are durable against vibration and shock and last longer than a halogen lamp. HID lamps have great luminous intensity and the light is very similar to daylight, which improves working safety and is pleasant for the operator of the vehicle.
|
|
New heavy duty LED worklight
The N25 LED worklight is designed for
applications, where high service life and
durability is important in extremely tough
conditions.
With its low power consumption and
multi voltage use, combined with
superior illumination and extremely long
life time makes the N25 LED worklight
suitable for most applications in the
industry. The N25 LED worklight is
completely waterproof and vibration
resistant, which gives the most requiring
customer a product that exceeds all
expectations.
|
|
Nordic halogen work lights
Nordic halogen work lights are solid, compact and easily serviceable, that is reliable partners in demanding work and working conditions.
N300 worklights are oval shaped and the reflectors are designed in free-form optics. N100 and N300 lamps are also available as twin power opetion (two bulb).
The Nordic 300 Twinpower bulb system has been equipped with a vibration damper. Super Damp (SD) versions are available for extremely demanding conditions. The patented Nordic Lights super damping system gives long lasting durability against shock and vibration.
N200 lamps are classics of Nordic Lights and are used in many different areas of industry because of their endurance and solid construction.
N100 is a work light which is suitable for locations that require wide illumination. Lamps from this series are also available in flush mount design.
N25 lamps have been designed for machines where space is limited.
|
|
| ... products without technical information |
| |
The white LED ON-AXIS (COAXIAL) by PHLOX® offer the best uniformity on the market.
ON AXIS Light 50x50 SLLUB:
- Luminance Minimum: 3 500 cd/m2
- Uniformity Minimum: 80 % (+/- 10%)
- Input current: 440 mA
- Expected life: 50 000 hours
Application: Lighting for industrial vision
|
|
The white LED ON-AXIS (COAXIAL) by PHLOX® offer the best uniformity on the market.
ON AXIS Light 100x100 SLLUB:
- Luminance Minimum: 3 500 cd/m2
- Uniformity Minimum: 80 % (+/- 10%)
- Input current: 640 mA
- Expected life: 50 000 hours
Application: Lighting for industrial vision
|
|
| ... products without technical information |
| |
... see all the products in the category
UPSs
|
| ... products without technical information |
| |
Technical Data
1. Dry capacitors (epoxy, oil-free)
2. Plastic case (corrosion-free)
3. Voltage rating : 120V to 660V AC
4. Frequency : 50/60 Hz
5. Capacitance range: 1.0µF to 100.0µF
6. Capacitance : ± 5%
7. Temperature range : -25°C to 105°C max
8. Dissipation factor : 0.5% per one KHz
9. Approval : UL810.CUS and EIA-456.JIS-4908. and IEC
10. Plastic capacitors : models with leads or with terminals 6.35±0.1mm (quick connection; M 8 x 10mm)
11. Test voltage between terminals and containers : 3KV 60/50Hz for one minute
12. Test voltage : 1.75time RV, one minute
13. Pull test : Will sustain 2Kg steady pull in the direction of lead egress and 1Kg steady pull at any 90 degree angle for 60 seconds
After test, capacitor shall show no evidence of damage and pass all electrical requirements
|
|
|
Lamp power factor capacitors are used for improvement the power factor on fluorescent, mercury, metalhallogen and sodium lamps.
|
|
LIFASA's lighting capacitors, with its different series cover the most wide range of needs and solutions.
All them are produces under supervision of a highly strict Quality System in accordance to norm ISO 9002, certified by the British Standard institution (BSI) since year 1987.
They are auto-regenerative capacitors with dielectric polypropylene without impregnation, specially designed for compensation and lighting.
|
|
| ... products without technical information |
| |
 see the results for the following category : Batteries |
|
|
