|
|
SUPPLIERS OF BOLT LOCK with one key slot to block a sector.
Lock with bolt (diameter 10 or 15) designed to easily loosen a contact block associated with the manipulation of the lock bolt.
Mechanical blocking of industrial circuit breaker, fused sectioning devices, cock, commands …
Associated with a contact permits blocking of control circuits.
Coding is done in the body of the lock.
STI provides key number management by site (please contact us).
Related with an access lock, the version of this device without a contact does not need any wiring (key transference)
Compact lock (without barrel): the key directly moves the bolt drive.
Positive Safety: Opening of the contacts related to the movement of the bolt (key liberation which moves the bolt)
Function: Key free – bolt out / key held – bolt inside. Safety contacts permit blocking of the control circuit and/or resending information, a signal, …
|
|
Stud welding guns:
P-NS 20 BHD
High-performance professional gun for drawn-arc brazing
Gun power ø 32 mm
Length 330 mm
Weight 3,4 kg
Standard gun for drawn-arc welding
Gun power ø 16 mm
Length 190 mm
Weight 1,6 kg |
|
The heads of splicer C2G are designed to be used and installation for center holes specific, machines, industrial robots or others functioning in cn. The technology of this product allows a maintenance easy as well as the automatic feeding of the pins to be welded for a best performance.
Available for technologies: SIG (Stud Inert Gas) - ARC (ARC fusion forging) or DEC (Discharge of Condensers). |
|
The industrial guns to weld pins C2G answer perfectly the criteria imposed by metallurgical industries.
The design and the quality of the guns are appropriate for all the types and diameters of pins of the existing processes of brazing: SIG (Stud Inert Gas) - ARC (ARC fusion forging) or DEC (Discharge of condensers).
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
Screw-clamp feed-through manufacturers of terminal blocks, CBC Series, polyamide insulating body, UL94V-0 flame behaviour, reduced overall dimension, cross-connections (PTC) by ?Easy bridge? patented system, with no need of additional protection.
To be mounted onto TH35 - 7.5; TH35 ? 15 type rail, according to IEC 60715. |
|
Differents kinds and possibles uses:
- Single Level
- Multiple Connection
- Double Level
- Triple Level
- Distribution Blocks
- Micro
- Modular Panel Mount
- Single Level Industrial fuse
- Double Level Fuse
- Disconnect & Test
- Manufacturers of thermocouple
- Earthing
- Neutral/Earth Clamp specifications
- Corrosive/Explosive Env.
|
|
Optimum contact ensured through the patented and renowned clamping yoke system which is based on the classical increase of force of the screw. Requring only small effort, the screw thread produces high contact power.
A high contact force is only effective when continuously excerted on the conductor. The Weidmüller clamping yoke system works as follows: When the clamping screw is tightened, the resultant force causes the upper thread overlap to spring open, thus causing a locking action to be exerted on the screw. Movement of the connected conductor is compensated by the elastic behaviour of the clamping yoke.
Result:
The connection is vibration-resistant and makes retightening of the clamping screw unnecessary. |
|
Pressfit Power Professional taps with Screw Mount and Angled Slip-on Terminals
10 pin
Pressfit Power Taps with Screw Mount Terminal
6 pin
10 pin
Solder Power Taps with Screw Mount Terminal
6 pin
10 pin
|
|
The screw connectors supplier are intended for stranded and solid aluminium and copper cables, carrying low and medium voltages of up to 36 kV. The range covers cross-sectional areas of 6-630 mm² for round cable and 25-300 mm² for sector cable.
Connection to the conductors is achieved by tightening the screws in the through connector or terminal to a predetermined torque. Tightening takes place into a partially threaded nut. The tightening torque is correct when the screw breaks at its notch. It does this thanks to an innovative double-ended shear-off screw, as shown in the illustration |
|
| ... products without technical information |
| |
The main features:
- modular conception of screws and barrels
- easy and low-cost adaptation of the system
configuratio to the individual processing task
- throughputs up to 60 kg/h
- applications from material development up to small-scale production of profiles |
|
| ... products without technical information |
| |
This series of gear reducers with attached or integrated thrust industrial bearing can be supplied in a helical or bevel winding gear arrangement. Quiet operation and strong design are key features. Horizontal or vertical mounting position, splash lubrication and cooling coil or injection lubrication are possible options. The modular design of the POSIREX is based on the POSIRED 2 range, plus a selection of available thrust-bearing parts.
Technical Data:
Torque (T2 nominal): 3,000 up to 800,000 Nm
Transmission Ratio: 4 up to 160 iN
Axial force: F = 50 up to 2,000 kN
|
|
Double shaft extruder suppliers professional gears have been built by PIV Drives since 1984 for a variety of applications in the plastics and food industries. This product is in operation around the world to the complete satisfaction of our customer base. The gearing is case hardened and ground with a profile correction for optimal load-bearing performance and noise reduction. An extremely quiet gear-train is achieved through a high contact ratio. The axial forces which occur during the extrusion process are safely absorbed through a system of tandem bearings manufacturer and self-aligning roller thrust bearings.
Technical Data:
Screw centre distance: a = 15 up to 200 mm
Input speed: up to 1,800 rpm
Torque factor: df = 35 Nm/cm3
Power: up to 5,500 kW
|
|
Our product line consists of proven technology including PneumaticScaleAngelus' Pneumacapper and Consolidated Capem Professional cappers. We also offer a wide variety of sorters to accommodate any size and shape.
-Proven technology from PneumaticScaleAngelus including Consolidated's Capem Cappers
-Reliable, minimal-maintenance, highly versatile capping solutions from the industry leader in packaging automation
-Widest range of cap and containers with maximum speeds of 750 CPM
-Superior customer service and technical support |
|
| Single-head capping line with magnetic professional clutch head and Pick & Place device suitable to apply special plastic pre-threaded screw caps on special glass, PET and PVC bottles. |
|
MICI 80 / 180
motion up to 180 µm
high resonant frequency
parallelogram construction
additional mass up to 20 kg
applications:
quality control
automation
fine adjustment of optical components
mikro-assembly
This element was originally developed for quality control in the optical industry %u2013 it consists of a piezostage in combination with a micrometer drive.
The user can first adjust the position of the actuator manufacturer and then fine-tune this position with the aid of the piezostage.
The resolution is in the nm and sub-nm range.
Because of the very robust construction of the element, an additional mass of up to 20 kg can be lifted. |
|
MICROMETER SCREW
• SYLVAC inductive measuring system, patented
• Digital display LCD, height of digits 6 mm
• Data output RS232, combined with external power feeding
• Simplex transmission
• Rotating display Ø 44 mm over 270°
• Non-rotating manufacturers of spindle
• Tungsten carbide anvil
• Fine adjustment as accessory |
|
|
|
see the results for the following category