|
|
Suitable for all Braime sensors & other industry standard cylindrical sensors
Not affected by shaft or machine vibration
Easy to install, safe
Optional "Magcon" simplifies mounting
Heavy duty all stainless steel version available on request
|
|
|
Find an amelirate version about ours dustproof under speed monitor SENSOR JET which become GYROJET, more small and more power, the GYROJET possess an integrated inductive detector from 6 to 6000 pulses/min and a preset under speed level, with a quick fitting to shaft and an anti-rotative flexible strap, the GYROJET will permit you to have a totaly control for the speed of your elevator.
|
|
|
The base 9116 Series Compensator includes anodized aluminum top and bottom plates, hardened steel overload pins, and shear pads. The 000 and 100 sizes use 3 shear pads. The 200 size uses either 3 or 6 shear pads. The 400 size uses either 6 or 12 shear pads. Units with lock-up include an air cylinder, bearing plate, lock-up screws and lock-up screw bushings. Units with lock-sensing also require a sensor fitting and a cabled proximity sensor.
|
|
|
Plant and mechanical engineers are responsible for ensuring personal safety. The machine safety products of elobau range from sensors and evaluation units for small machines to bus components for large plants. The personnel of elobau GmbH offers support with the implementation of the latest safety guidelines in particular the SIL accreditation.
|
|
Safety level TYPE 2 - SIL 2 - SILCL 2 - PL d - Cat. 2
ILION is a Type 2 safety photocell with M18 cylindrical metal body.
The protection system can be composed of 1, 2, 3 or 4 single beam
photocells connected to an AU SX or AU SXM control unit
with Muting (for details on the interface see AU SX and AU SXM
control units).
The compact size of the photocells makes it possible to fit the protection
system into very small spaces, while the possibility to use more photocells
provides the maximum flexibility in positioning the protective beams.
|
|
|
|
|
|
The PXS or PSS type products are sensors designed to control the opening of protective devices, machine casings and access doors.
Associated with their respective coded magnet and a controller module, they are capable of monitoring 1 or more "O" contacts
(break, closed with a magnet) and/or 1 or more "C" contacts (make, closed with a magnet). They meet the "CE" directives and
European regulations relating to machine conformity as per the standards EN60204 - EN1088 - En 954 and be covered by the
categories 1 to 4 of these standards according to the associated module (CETIM certificate).
Safety functions performed thanks to :
- Tamper-proof: the sensor, associated with its coded magnet, reduces the possibility of tampering ; a standard magnet cannot
actuate the sensor .
- Redundancy: the components are redundant. If part of the sensor fails, the redundant circuit continues to operate.
- Unbalance: associated with a controller module which checks the unbalance of the signals from the sensor, the first fault is
signaled if the switches are not actuated in the right order
Magnetic safety sensors represent an alternative to mechanical position switches in the following cases :
- Mechanical clearance required to overcome alignment or vibration problems,
- Compulsory complete sealing: industrial, food and mechanical environments,
- Longer lifetime and reliability.
|
|
PSEN sensor technology, Safety for man and machine
Safety switches ... for safety gate and position monitoring :
Hazardous machine movements must be stopped when a guard is opened. It must not be possible to either defeat or manipulate these guards. PSEN safety switches meet this requirement and are therefore suitable for monitoring gates in safety fences for safety zones, for example.
Safety bolt ... for safety gates in a rugged everyday industrial environment :
For safety gates that are difficult to adjust or in areas where safety gates are often opened and closed, protection must be provided against defeat and manipulation, but a long material service life must also be guaranteed. PSENbolt provides a complete solution, comprising safety switch, handle and bolt.
Safe camera systems : to monitor two-dimensional (2D) or three-dimensional (3D) zones.
|
|
|
|
|
|
BNS range magnetic safety sensors serve to monitor the position of sliding, hinged and removable safety guards. Sensors without integral evaluation can only be used for safety duties to DIN VDE 0660-209 in combination with a safety guard monitor of the AES / AZR range for protection up to Control Category 4 to EN 954-1, see chapter 10.2.
The use of magnetic safety sensors is of particular advantage in cases where extremely dirty conditions can occur or high hygienic standards need to be maintained. This is provided by the simplicity of cleaning the units.
A further advantage is the facility for concealed mounting under non-magnetic materials. Working surfaces and storage areas can be arranged without the need for dust-collecting edges or other functionally required cut-outs or projections.
BNS range magnetic safety sensors can also be used in cases where a precise approach is not possible and greater tolerances are required.
Schmersal make both standard and AS-i Safety at Work magnetic safety sensors.
Click here to see the AS-i models Or for the standard models click below
|
|
|
The industry's most complete line of contact and non-contact products. GE Security Industrial safety interlock switches are used to detect the opening of guards-including doors, gates and/or removable covers-that prevent access to dangerous parts of a machine, and to help deter tampering with the guards or the internal machine controls. As with all GE Security Industrial 300-BT products, the safety interlock switches are in full compliance with the most current and required standards. These include IMQ, CE, VDE, UL, CSA, IEC, EN and Semi S2 standards.
|
|
AU - Emergency Stop Device
Range of 5 models of Emergency stop modules
* Easy to install and to use
* Wide range of loading force and capacities
AUR - Resettable Emergency Stop Device
Range of 2 models of ressetable emergency stop modules
* Easy to reset due to our patented mechanism
* Easy to install and to use
* Wide range of loading force and capacities
ULS - Emergency Stop Module
The ULS series load limiter protects the machine and parts from overloads caused by collisions, excessive loading, or programming errors by providing a coupling that separates before pre-determined limits are exceeded thus shutting down the operation.
* Prevents robot damage caused by excessive overloading, collision, or programming errors
* High payload to weight and size ratio
* Variable overload setting
* Built-in sensors are factory set and never need adjustment
|
|
|
|
|
|
CH - Horizontal Compliance Device
Range horizontal compliance including five models. The CH series allow to compensate horizontal misalignment.
- Stroke range from 6 to 24mm
-Options : spring safety (RA ou RL), probe (T), interface (I), Viton seals (V)
KA - Lateral Compliance Device
The KA series of lateral alignment devices compensates for part misalignment (X/Y) during assembly where part positioning may be less than precise. The locking cylinder centers the tool plate and secures the unit during rapid movement.
- Compensates for misalignment between parts at assembly
- Stiff in all directions when locked, fully compliant when unit is unlocked
- X-Y roller bearing motion with pneumatic centering
RCW - Lateral and Angular Alignment Device
The RCW compliance wrists are ideal for insertion applications where part positioning may be less than precise. Compliance in torsion, bending and lateral directions allow this device to compensate for inaccuracies thus protecting the part and machine.
- Compensates for inaccuracy or misalignment between parts and machine in both lateral and angular axis
- Increases assembly speed while reducing wear and parts jamming
- Improves quality and reduces cost by avoiding damage of parts
|
|
|
|
|
|
CH - Horizontal Compliance Device
Range horizontal compliance including five models. The CH series allow to compensate horizontal misalignment.
Stroke range from 6 to 24mm
Options : spring safety (RA ou RL), probe (T), interface (I), Viton seals (V)
KA - Lateral Compliance Device
The KA series of lateral alignment devices compensates for part misalignment (X/Y) during assembly where part positioning may be less than precise. The locking cylinder centers the tool plate and secures the unit during rapid movement.
Compensates for misalignment between parts at assembly
Stiff in all directions when locked, fully compliant when unit is unlocked
X-Y roller bearing motion with pneumatic centering
RCW - Lateral and Angular Alignment Device
The RCW compliance wrists are ideal for insertion applications where part positioning may be less than precise. Compliance in torsion, bending and lateral directions allow this device to compensate for inaccuracies thus protecting the part and machine.
Compensates for inaccuracy or misalignment between parts and machine in both lateral and angular axis
Increases assembly speed while reducing wear and parts jamming
Improves quality and reduces cost by avoiding damage of parts
|
|
The ShockWatch UsageManager™ accurately monitors equipment usage and wirelessly transmits real-time data to a management software program. Wireless transmission eliminates the need for manual retrieval of usage readings, enabling more effective and efficient management of fleet equipment.
|
|
The Optex OA-Fusion I/II/III are suited for the retrofit market. You can upgrade doors that were installed years ago to the safety level of today at reasonable cost by fitting the OA-Fusion I/II/III behind the existing activation sensor.
The Optex OA-Fusion is an active infrared safety sensor tested and approved by the German test organization TÜV and in compliance with DIN 18650 and the preliminary European norm prEN 12650.
The Optex OA-Fusion I/II/III are equipped with test outputs suitable for almost every automatic door, by choosing the right dipswitch setting.
|
|
|
The ShockWatch EquipManager™ is a wireless fleet management system that ensures OSHA compliance, controls access, detects impacts, and monitors equipment operation to improve safety while reducing damage-related costs.
|
|
Siemens Automation und Drives presents the SIMATIC Mobile Panel 277F IWLAN the first wireless operator interface with integrated safety functionality.
When configuring the device, the user is supported by the WinCC flexible 2007 engineering software to define "effective ranges" in which the machine can be controlled by the operator.
A transponder limits the effective ranges in which the device can be identified locally. This ensures fail-safe operator control and clear assignment of the appropriate operating screens and operator authorizations anywhere in the plant.
The transponder can also be used to define zones in which certain functions are configured, such as automatic on-screen display or operator authorizations for particular persons when they enter the zone
|
|
Stop Time Measuring Instrument for safety measurements at power driven machines such as presses, shears and robots. The system is used to calculate the distance of the safety device. (2-hand control, light curtain ..)
Portable and solid equipment, built-in matrix printer
Free adjustable stop point
Standstill detection down to v < 1 mm/s
Measurement of maximum velocity
Measurement of velocity at stop point
ISO9000 calibration certificate
Traceability of measurement values
RS-232 interface for PC connection
Fast set-up time
Actuator to release no-touch safety equipment as option
|
|
The Safety and Motion Analyser Tool (Smart) is designed to enable key Safety Critical machine parameters to be easily checked.
Smart has many valuable features for stopping time measurement:
- Graphical result - a "fingerprint of the movement"
- Calculates minimum allowed safety distance
- Easy to analyse stopping characteristics and movement
- Shows how the stop distance can be optimised
|
|
Honeywell MICRO SWITCH™ Safety Switches
Full-Scale Offering. Solid, Robust Industry Knowledge.
Whether you're an end-user or OEM, you face an ongoing challenge: to keep your machines and equipment operating safely and productively, while meeting all global workplace safety standards. When you need comprehensive solutions for machine safeguarding, Honeywell helps you meet the challenge with one of the industry's broadest switch portfolios.
Honeywell offers you choices to ensure that your needs are met in the safety arena. Designed with OEMs in mind, we offer safety switches in every size.
-Miniature switches – less than 50 mm [2 in] square – for smaller doors and openings
-Trapped key and solenoid key switches for large, heavy doors
-Cable pull switches for conveyor or perimeter guarding.
-Non-contacting switches for small door position detection
And, all our products are backed by the Honeywell brand, service, and global support.
|
|
Bumpers ASTEEL SENSOR are complete electric systems of safety, which integrate a sensor, sensitive to a force of actuation, as well as an enclosure of self-checking.
Sensitive bumpers ASTEEL SENSOR are particularly adapted for the applications such as: wire-guided carts, forklift trucks, installations with automatic displacement, gantry cranes.
Choice ASTEEL SENSOR:
- System independent of the atmospheric pressure, the temperature and the vibrations.
- Technique with 4 yarns to ensure the redundancy of the chain of safety
- Possibility of connecting several devices sensitive to the same enclosure of self-checking.
- Models available with standard dimensions or to measure.
|
|
ASTEEL SENSOR's sensitive mats are complete safety electric systems which integrate a sensor and an automatic control module.
ASTEEL SENSOR's mats are particularly fit in with applications such as : robots, machines, assembly lines, vertical storage warehouses.
The ASTEEL SENSOR choice :
- The system is independent from atmospheric pressure, temperature and vibrations.
- A 4 wires technology ensures the redundancy of the safety chain
- Possibility to connect several sensitive mats on the same automatic control module.
- Sensitive mats are available either with standard dimensions or on-measure according to your specifications
|
|
|
|
see the results for the following category : 
