|
|
The Idemag CPR Non Contact Interlock Switch range offers a compact slimline professional fitting and provides environmental protection up to 80C. and is suitable for high pressure hosing (IP66/67).
The housing is finished and sealed with a fitted back plate for extra mechanical and environmental durability.
In addition to the high specification enclosure the switch offers a wide 14mm sensing distance, a high tolerance to misalignment and can be actuated rom either the side or front switch face.
They will connect to most popular Safety Control relays to provide up to Cat. 4 EN 954-1. |
|
Eden is a new non-contact sensor using dynamic signal transmission. The sensor operates to category 4 according to EN 954-1 and has an extended sensing distance. Several Eden sensors and light beams can be connected in the same safety circuit and dynamically monitored by the Vital safety module.
We also offer several other types of interlocking devices. The Manufacturer of emergency stop Grab Wire protection switch JSNY10 provides 'emergency shutdown' up to 25 metres. |
|
Idem Magnetic Non-Contact switches are designed to interlock hinge, sliding or removal guard professional doors. They are specifically advantageous when:
a) poor guard alignment exists
b) high hygiene requirements exist e.g. food industry professional hose down
c) a long mechanical life is required (no moving or touching parts)
Idem Coded Non-Contact switches are designed to interlock hinge, sliding or removal guard doors. They are specifically advantageous when:
a) poor guard alignment exists
b) high hygiene requirements exist e.g. food industry hose down
c) a long mechanical life is required (no moving or touching parts)
d) tamper-proofing is required |
|
The Hygiecode SMC Non Contact Interlock Switch range offers a compact yet robust 22mm professional fitting and provides environmental protection up to 105°C. and is suitable for high pressure hosing. The housing is finished and sealed with a stainless steel back plate for extra mechanical and environmental durability.
In addition to the high enclosure specification the switch offers a wide 14mm sensing distance, a high tolerance to misalignment, LED indication of switch status, 'anti-tamper' coded magnetic actuation, and 2NC 1NO switching circuits to cope with modern industrial control requirements.
They will connect to most popular Safety Monitoring relays to provide up to Cat. 4 EN 954-1 and SIL 3. |
|
Eden is a new non-contact sensor using dynamic signal transmission. The sensor operates to category 4 according to EN 954-1 and has an extended sensing distance. Several Eden sensors and light beams can be connected in the same safety circuit and dynamically monitored by the Vital safety module.
We also offer several other types of interlocking devices. The Emergency Stop Grab Wire protection switch JSNY10 provides 'emergency shutdown' up to 25 metres. |
|
We have the most flexible safety relays on the market. A universal relay is a safety relay with various input options for various safety stations and risk levels. Internally, the safety relay is of the highest safety level (category 4 according to 954-1). A machine supplier can therefore, with one single safety relay, select the input configuration that best suits his customer's safety requirements.
Some of the advantages with JOKAB SAFETY's safety relays:
- Universal relays
- Excellent reliability
- Approved in Europe, USA, Canada
- Supervised reset
- Time reset
- Small and compact
- Detachable connector manufacturers blocks
- Low power consumption
- Permits the use of long emergency stop professional cables
- EX compatibility
- Functions set by external hardwired links
- LED indication and outputs for indication
- Powerful switching capacity
|
|
Pizzato Elettrica has designed and patented new accessories to install the rope of protective switches faster and to obtain an aesthetically more pleasant system.
The new accessories, in comparison with the traditional fixing system through carpentry material, have the following advantages:
%u2022 The installation is faster because only one screw is used for the fastening of every rope extremity, and the parts are prepared to ease the installation. Some practical tests have pointed out that the installation time is halved, reason for which it is named FAST.
%u2022 The system is aesthetically pleasant, because thread parts (which sometimes tear operators%u2019 dresses) and the rope extremities, usually fixed by heat-shrinkable sheath or supplier of adhesive tape, have been hidden.
%u2022 The red plastic covers of the fixing parts have been developed also for the function of controlling the rope clamping. If the rope fastening screw is not fixed tightly enough, the cover cannot pass.
%u2022 The rope is fixed without folds, thus reducing the rope stabilisation time and the possible re-calibrations of the rope tightening.
Furthermore two sturdy pulleys has been introduced in applications where the rope is very long in order to support the rope length or to bend its route. They are designed to avoid any deformation and to allow the rope to remain in its industrial seat also when it is energetically activated. |
|
Speedshield SSV3 is the latest version of the award winning safety system for industrial vehicles. Speedshield's revolutionary system allows safety conscious companies to control and monitor their entire fleet of vehicles in real time, mitigating the ever growing risks in today's workplace.
As well as reducing risks in the workplace, the system also helps to save on costs, such as fuel, tyre wear and emissions. Speedshield should be an integral part of the minimum safety specifications for your site. |
|
Command devices are of great importance for the man-machine interface in the area of industrial applications. For example, they are mounted in switch-boards, control panels, two-hand control panels, in lift manufacture and on materials-handling plants, including conveyors. Manual actuation of the devices starts operating sequences and functional processes or serves to bring these to an end.
Emergency stop command devices are generally connected in the safety circuit of a machine or plant and are of particular importance in terms of the control system for these. In case of a fault or accident, the secure function and quick accessibllity of Emergency Stop command devices can be crucial for saving life, limiting the degree of injury to personnel or the extent of damage to a machine.
New requirements are placed on the mode of operation of these command devices by the new harmonised European Standard EN 418 regarding functional aspects and recommendations for the arrangement of Emergency Stop equipment.
|
|
| Stop XP/TX products are heavy duty explosioin protection safety gate switches designed to provide versatile solution to controlling access to machinery and process lines operating in potentially explosive enviroments found in the chemical and petrochemical paint , pharmaceutical, powders and mining industries. |
|
Control Switches for Panel Mounting Series 8003
Explosion protection to
CENELEC
IEC
For use in
Zone 1 and Zone 2
Zone 21 and Zone 22
Switch function
many switching arrangements (latching or spring-return) possible via coding
easy change of the coding possible on site
max. 2 pole
For max. 6 A
With connection leads or terminals |
|
| Plant and mechanical engineers are responsible for ensuring personal safety. The center safety products of elobau range from sensors and evaluation units for small machines to bus components for large plants. The personnel of elobau GmbH offers support with the implementation of the latest safety guidelines. |
|
Safety coded magnetic sensor, SR-SM series
Pizzato Elettrica offers on the market the new safety magnetic sensor SR-SM series.
Safety magnetic sensors are devices studied to monitor protections and guards that, when linked to a safety module, can create a system up to safety category 4, according to EN 954-1. These products are composed by a magnetic field monitoring sensor, which is connected to the machine structure; and by a coded magnetic actuator, which has to be connected to the mobile guards. The sensor is manufactured to be activated only by the correct coded actuator and not through a common magnet.
Pizzato Elettrica safety sensors distinguish themselves by following main features:
• Insensitivity to dirt as totally sealed, making them especially proper to be used in the food-industry sector.
• Wide actuation zone, characteristic appreciated in the use of inaccurate protections or for protections that can change their mechanical characteristics through the time.
• Stainless steel fixing plates to avoid that the sensor could be damaged during the installation.
• Possibility of connection in series more sensors also with mechanical switches.
• Actuation from two different directions.
• Available with cable or M8 integrated manufacturer of connector.
• Actuators with operating distance of 5mm or 8 mm.
The new sensor series complete the wide range of products that Pizzato Elettrica can offer in the device safety field. For further information visit our web-site www.pizzato.com or ask for special documentation. |
|
SAFETY SWITCHES SUPPLIERS HINGE-SHAPED, PALLADIO LINE
Pizzato Elettrica widens the own range of products making a new series of safety switches hinge-shaped named Palladio, where thanks to an aimed planning and a punctual analysis of the market requirements, safety and style are melted in one single product. The switch is completely integrated in the mechanical hinge, to result practically invisible to an inexpert eye. This guarantees a higher safety because a switch hard to identify is consequently also more difficult to defeat.
The assembly without visible screws and the pleasant line, make the switch perfectly integrated also with guards of modern design machinery.
In order to complete the offer it’s available also an additional hinge with purely mechanics functions.
The innovation of the product regards also the technical aspects, as following:
• Several contact blocks up to 4 contacts (2 NC contacts + 2 NO contacts).
• Possibility of operating point regulation (fundamental for large guards).
• Protection degree IP67.
• Integrated cable or industrial connector output available from the frontal or the rear side. |
|
| The PROTECT PSC is a brand-new generation of a Safety PLC, which was especially designed to meet the requirements of modern production systems and complex individual machines. The modular system concept enables the user combining the input and output modules of the PROTECT PSC system in accordance with the needs of the specific application. In this way, no inputs or outputs of the modular safety system remain vacant, as it is often the case with other Safety Manufacturers of plcs. This means that every user can compose “his” optimal PROTECT PSC system – an economical solution. The system however offers the possibility to integrate at any time further input and output modules in the existing system, with little effort as only the software has to be changed slightly. |
|
| The Safety Network Controller is the heart of a DeviceNet Safety Network system. The Safety Network Controller hosts the safety application program, professional monitors the safety inputs and controls the safety outputs. Either use it as a stand-alone controller or embedded in a DeviceNet network. |
|
The NE1A Safety Network Controller from Omron STI reshapes previous thinking about safety systems. Until now, safety control circuit design was cumbersome. The process involved tedious wiring and any changes required direct modification of the wiring. Programmable safety circuits simplify the design process. Safety I/O terminals make system modifications easy and allow the safety I/O capacity to be increase without extensive rewiring.
The NE1A Safety DeviceNet Controller:
■ Eliminates long runs of complicated wiring
■ Compatible with the DeviceNet Open Network
■ Provides Individual I/O status and error indicators
■ Minimizes the need to rewire when making machine modifications
■ Conforms to Global Safety Standards
■ Meets IEC 61508 SIL3 |
|
| Plant and mechanical engineers are responsible for ensuring personal safety. The center safety products of elobau range from sensors and evaluation units for small machines to bus components for large plants. The personnel of elobau GmbH offers support with the implementation of the latest safety guidelines. |
|
Z/T and E.95 range position switches are suitable for sliding and hinged safety guards, which need to be closed to ensure the necessary operational security.
In combination with AES and/or AZR range safety monitoring modules all position switches class 1 shown in this chapter achieve Control Category 3 or 4 to EN 954-1.
Further applications for positions switches class 1 are most varied positioning duties. The variety of requirements to be found in practice can be met in detail by means of a wide range of actuating elements.
Design and mode of operation:
On the position switches class 1 the guarding device and the positive break NC contact are positively linked.
Schmersal make both standard and AS-i Safety at Work position switches with safety function.
Click here to see the AS-i models
Or for the standard models click below
|
|
The SITEMA Safety Brake type KSP is designed to hold a vertical moved mass in one direction (against gravity). The holding is done on a round shaft. This could be an already existing cylinder rod or a separate rod. The Safety Catcher can also be used to catch the falling load in case of an emergency-stop. The holding force is relatively big in one direction (downwards) and in the other direction (upwards) relatively small.
Safety brakes are already used in the following applications
- vertical or diagonal station tool axes
- vertical axes of loaders
|
|
The company Pizzato Elettrica is suggesting to the market many new products in the safety field for the factory automation.
In particular, it has been recently introduced anew and innovative series of strong protective switches with separate industrial actuator and manufacturers of solenoid for guards and entrance machinery monitoring.
These FG series switches have a shape suitable for the installation also on modular profiles (40x40 mm) and distinguish themselves for following features:
• High sturdiness guaranteed by the metal housing and the stainless steel actuator (holding force 2500 N)
• Contact blocks with 4 poles available in 12 different configurations.
• Possibility of operation state signalling through external LED.
• Rotating head in 90° steps, not detachable, with actuator entries both frontal and vertical for the maximum versatility in the installation
• Protection degree IP67
• Versions with rotating lock release device, with emergency release push button or with both devices.
The new switches series integrates the wide range of products that Pizzato Elettrica can offer to its customers, for complete solutions and without compromise to machinery safety problems.
For further information it’s possible to visit the web-site www.pizzato.com or ask for the new general catalogue 2007/2008. |
|
| Omron STI safety interlock switches are available in a wide variety of models to satisfy most machine guarding applications. Models range from rope-operated emergency stop buttons, non-contact magnetic and hinge-pin-operated interlocks, to solenoid-actuated guard-door locking switches that restrict access until industrial safe conditions exist. All models conform to applicable U.S. safety standards and all carry the CE mark. |
|
The ShockWatch UsageManager™ accurately professional monitors equipment usage and wirelessly transmits real-time data to a professional management software program. Wireless transmission eliminates the need for manual retrieval of usage readings, enabling more effective and efficient management of fleet equipment.
|
|
The PXS or PSS type products are sensors designed to control the opening of protective devices, machine casings and access professional doors.
Associated with their respective coded magnet and a controller module, they are capable of monitoring 1 or more "O" contacts
(break, closed with a magnet) and/or 1 or more "C" contacts (make, closed with a magnet). They meet the "CE" directives and
European regulations relating to machine conformity as per the standards EN60204 - EN1088 - En 954 and be covered by the
categories 1 to 4 of these standards according to the associated module (CETIM certificate).
Safety functions performed thanks to :
- Tamper-proof: the sensor, associated with its coded magnet, reduces the possibility of tampering ; a standard magnet cannot
actuate the sensor .
- Redundancy: the components are redundant. If part of the sensor fails, the redundant circuit continues to operate.
- Unbalance: associated with a controller module which checks the unbalance of the signals from the sensor, the first fault is
signaled if the switches are not actuated in the right order
Magnetic protection sensors represent an alternative to mechanical position switches in the following cases :
- Mechanical clearance required to overcome alignment or vibration problems,
- Compulsory complete sealing: industrial, food and mechanical environments,
- Longer lifetime and reliability. |
|
BNS range magnetic safety detection serve to monitor the position of sliding, hinged and removable safety guards. Sensors without integral evaluation can only be used for safety duties to DIN VDE 0660-209 in combination with a safety guard monitor of the AES / AZR range for protection up to Control Category 4 to EN 954-1, see chapter 10.2.
The use of magnetic safety sensors is of particular advantage in cases where extremely dirty conditions can occur or high hygienic standards need to be maintained. This is provided by the simplicity of cleaning the units.
A further advantage is the facility for concealed mounting under non-magnetic materials. Working surfaces and storage areas can be arranged without the need for dust-collecting edges or other functionally required cut-outs or projections.
BNS range magnetic safety sensors can also be used in cases where a precise approach is not possible and greater tolerances are required.
Schmersal make both standard and AS-i Safety at Work magnetic safety sensors.
Click here to see the AS-i models Or for the standard models click below |
|
| With the SafeC range of safety controllers from CEDES, equipment and machine engineers obtain a controller which offer you maximum freedom with minimum expenditure. Compared to conventional safety Supplier of plcs or other safety-Bus solutions, savings of up to 75 % (!) are possible with the CEDES SafeC controllers. These safety controllers substantially simplify industrial and automation systems. Safety does not need to be complicated and expensive. |
|
|
