|
|
One of the areas which makes Idem's Guardian Line Rope Switch Line new and innovative is in the area of rope connectivity. Traditional ‘turnbuckle’ style rope fasteners and adjusters are prone to rope slippage and require frequent re-tensioning leading to production loss caused by machine down time.Idem has overcome this common problem by providing a ‘no nuts or bolts’ rope connection system with a ‘Quick Link’ clasp at one end of the rope and a patented Tensioner /Gripper at the other.
The Tensioner / Gripper is located at the switch (rather than elsewhere along the rope length) so that the switch tension window can be viewed.
Final setting and locking can be achieved in a matter of seconds without any need for frequent re-tensioning.
|
|
Emergency pull-wire switches
ZS 80
Metal enclosure
4 contacts
Position indicator and integrated emergency-stop push button
Wire length up to 75 m
Pretensioning force 100 N
Lever for release and position indication
Watertight collar
Wire pull and breakage function
Indicator lamp available
|
|
Pull-wire emergency stop switches are mounted on machines and sections of plants which cannot be protected by guards. In contrast to mushroom head Emergency Stop push buttons, on pull-wire switches the Emergency Stop command can be initiated from any point on the wire.
In combination with one of the AES and AZR range safety monitoring modules, see chapter 10.3, ZS range pull-wire emergency stop switches can be used for Control Category 3 or 4 to EN 954-1.
Design and mode of operation:
All of the pull-wire emergency stop switches conform to European Standard EN 418. They have a positive linkage between the NC contacts and the wire rope. The pull-wire emergency stop switches are brought into the operational condition by pre-tensioning the wire, i.e. the NC contacts are then closed and the NO contacts open.
Schmersal make both standard and AS-i Safety at Work pull-wire emergency stop switches.
Click here to see the AS-i models
Or for the standard models click below
|
|
GLH Rope Switch
Idem Guardian Line Safety Rope Switches are designed to be mounted on machines and sections of conveyors which cannot be protected by guards. In contrast to traditional mushroom-head emergency stop buttons, Safety Rope Switches can initiate an emergency command from any point along the installed rope length and provide robust Emergency Stop Rope Pull protection for exposed conveyors or machines.
On pulling the rope, the safety contacts are positively opened and the auxiliary contact are closed. The switches are mechanically latched and can then only be returned to the operational condition by pressing the blue reset button (as required by EN418). A bi-colour LED indicator is available to enable switch status to be viewed from a distance.
Satisfies EN 418 and IEC 947-5-1 IEC 947-5-5
Guardian Line GLH features:
Die Cast Yellow Painted enclosure
IP 67 for hosedown.
Contact blocks (4 pole) 3NC + 1NO or 4NC or 2NC + 2NO.
3 conduit entries M20 or ½" NPT
Protect hazards up to 250 m. long.
Reset by push button.
Rope tension indicators.
Optional Signalling lamp available Green / Flashing Red 24V dc.
Rope pulled and breakage detection.
E-Stop Mushroom type button fitted.
Explosion-proof version available
|
|
GLM Rope Switch
Idem Guardian Line Safety Rope Switches are designed to be mounted on machines and sections of conveyors which cannot be protected by guards. In contrast to traditional mushroom-head emergency stop buttons, Safety Rope Switches can initiate an emergency command from any point along the installed rope length and provide robust Emergency Stop Rope Pull protection for exposed conveyors or machines.
On pulling the rope, the safety contacts are positively opened and the auxiliary contact are closed. The switches are mechanically latched and can then only be returned to the operational condition by pressing the blue reset button (as required by EN418). A bi-colour LED indicator is available to enable switch status to be viewed from a distance.
Satisfies EN 418 and IEC 947-5-1 IEC 947-5-5
Guardian Line GLM features:
Die Cast Yellow Painted enclosure
IP 67 for hosedown.
Contact blocks (4 pole) 3NC + 1NO or 4NC or 2NC + 2NO.
3 conduit entries M20 or ½" NPT
Protect hazards up to 50 m. long.
Reset by push button.
Rope tension indicators.
Optional Signalling lamp available Green / Flashing Red 24V dc.
Rope pulled and breakage detection.
E-Stop Mushroom type button fitted.
|
|
GLS Rope Switch
Idem Guardian Line Safety Rope Switches are designed to be mounted on machines and sections of conveyors which cannot be protected by guards. In contrast to traditional mushroom-head emergency stop buttons, Safety Rope Switches can initiate an emergency command from any point along the installed rope length and provide robust Emergency Stop Rope Pull protection for exposed conveyors or machines.
On pulling the rope, the safety contacts are positively opened and the auxiliary contact are closed. The switches are mechanically latched and can then only be returned to the operational condition by pressing the blue reset button (as required by EN418). A bi-colour LED indicator is available to enable switch status to be viewed from a distance.
Satisfies EN 418 and IEC 947-5-1 IEC 947-5-5
Guardian Line GLS features:
Die Cast Yellow Painted enclosure
IP 67 for hosedown.
Contact blocks (4 pole) 3NC + 1NO or 4NC or 2NC + 2NO.
3 conduit entries M20 or ½" NPT
Protect hazards up to 80 m. long.
Reset by push button.
Rope tension indicators.
Optional Signalling lamp available Green / Flashing Red 24V dc.
Rope pulled and breakage detection.
E-Stop Mushroom type button fitted.
Explosion-proof version available
|
|
Stainless Steel Rope Switches
Idem Guardian Line Safety Rope Switches are designed to be mounted on machines and sections of conveyors which cannot be protected by guards. In contrast to traditional mushroom-head emergency stop buttons, Safety Rope Switches can initiate an emergency command from any point along the installed rope length and provide robust Emergency Stop Rope Pull protection for exposed conveyors or machines.
On pulling the rope, the safety contacts are positively opened and the auxiliary contact are closed. The switches are mechanically latched and can then only be returned to the operational condition by pressing the blue reset button (as required by EN418). A bi-colour LED indicator is available to enable switch status to be viewed from a distance.
Satisfies EN 418 and IEC 947-5-1 IEC 947-5-5
GLS-SS features:
Hygienic stainless steel 316 enclosure.
All screws and external/internal fittings stainless steel.
IP 67 - Ideal for food industry applications.
Contact blocks (4 pole) 3NC + 1NO or 4NC or 2NC + 2NO.
3 conduit entries M20 or ½" NPT
Protect hazards up to 100 m. long.
Reset by push button.
Rope tension indicators.
Optional Signalling lamp available Green / Flashing Red 24V dc.
Rope pulled and breakage detection.
Optional Extra E-Stop Mushroom type button available.
Explosion-proof version available
|
|
One of the areas which makes Idem's Guardian Line Rope Switch Line new and innovative is in the area of rope connectivity. Traditional ‘turnbuckle’ style rope fasteners and adjusters are prone to rope slippage and require frequent re-tensioning leading to production loss caused by machine down time.Idem has overcome this common problem by providing a ‘no nuts or bolts’ rope connection system with a ‘Quick Link’ clasp at one end of the rope and a patented Tensioner /Gripper at the other.
The Tensioner / Gripper is located at the switch (rather than elsewhere along the rope length) so that the switch tension window can be viewed.
Final setting and locking can be achieved in a matter of seconds without any need for frequent re-tensioning.
|
|
* Midwest Control Products Corp. offers Vernier Controls in a variety of lengths.
* MCP manufactures push-pull cables in a variety of thread sizes, including 10-32, 1/4-28, 5/16-24, 3/8-24, M4 x 0.70, M5 x 0.80, M6 x 1.00, M8 x 1.25, M10 x 1.50, 1/4-20, 5/16-18, and 3/8-16.
|
|
TRANSMISSION CABLES
The transmission cables may be employed as push-pull cables or as rotation cables and are realized according to the application standards or according to the customer's drawing.
Our technical department is ready to provide the necessary support at the planning stage.
According to the application exigences and the workload the most suitable solutions are suggested.
The wire ropes that compose the cables can be made of different materials, sizes and diameters.
|
|
TRANSMISSION CABLES
The transmission cables may be employed as push-pull cables and are realized according to the application standards or according to the customer's drawing.
Our technical department is ready to provide the necessary support at the planning stage.
According to the application exigences and the workload the most suitable solutions are suggested.
The wire ropes that compose the cables can be made of different materials, sizes and diameters.
|
|
|
Brake cables used for park brakes and pull-pull cable systems to transmit pull motion between two mechanical devices without the use of rods. Used in applications requiring a high load capacity (1500 lbs) and low deflection (3000 lbs).
|
|
|
Push pull and pull only cables used for performance applications such as aircraft, throttle, fuel shutoff, rudder trim and more. Wide range of sizes and materials from miniature to extra heavy duty cables for high amounts of compression and tension.
|
|
|
System used in place of cumbersome rod linkages on tractors, loaders, fire trucks, mining equipment, concrete pumpers and applications where the operator is remote to the transmission.
|
|
|
Cable controls used for hydraulic, pneumatic or electric controls in support of throttle control, 4 wheel drive activation, transmission shifting and many other applications.
|
|
Flexible power-control able to transmit accurately remotely into thorough or traction, a linear movement exerted with the one of its ends.
Inside a sheath armed with wire with ringed steels, slide a stranded cable inserted in rectified a steel twist protected by a PTFE envelope.
- 6 sizes of cables
- 11 races standards from 25 to 305 mm
- 4 types of sheaths
- 3 sealings
- 2 rigid or rotulées exits
- up to 4500 NR
- lengths up to 20 meters
|
|
| ... products without technical information |
| |
• Blower air wipe and air knife systems are designed for any wire size and speed
• Eliminate expensive compressed air and reduce energy usage by 75%
• Products are CE Registered with IEC motors
• Sonic is an ISO 9001:2000 Registered company
• Most Blower/Motor assemblies shipped in 5 days from receipt of order
|
|
Air Wipe Blow-Off System - Ring-Blade™:
Air Wipe Blow-Off System - Ring-Blade™ from Nex Flow™ is easy to mount and maintain and reduces both compressed air consumption and noise levels.
It produces a "laminar" flow of air along its 360º angle using the "Coanda" effect which "entrains" a large volume of air from the surrounding area along with the small amount of compressed air from the Ring-Blade™ air-saver wiper-blade to produce an output flow up to 30 times.
Air Wipe Blow-Off System - Ring-Blade™ pay back on compressed air savings can be as soon as a few weeks in some applications when compared to nozzle "rings" or simple annular slots used by other air wiping systems.
Blow-off, cool & clean items like pipe, cable, wire and hose with the Air Wipe Blow-Off System Ring-Blade™ from Nex Flow.
Air Wipe Blow-Off System - Ring-Blade™ Features:
- System is made of coated aluminum to provide even air flow 360º around the part.
- Designed as two pieces hinged together to open and close around the part.
- Instant on-off with no moving parts, no electricity or explosion hazard.
Air Wipe Blow-Off System - Ring-Blade™ Benifits:
- Even blow off around the part, light in weight and compact.
- Easy to install and maintain and allows removal of a continuous piece.
- Reduced compressed air use for energy savings plus lower noise levels.
- Maintenance free with output easily controlled, safe to use.
|
|
|
|
see the results for the following category
