|
|
| ... products without technical information |
| |
Specification:
Capacity: Mild steel up through 10 gauge (3.5 mm). Application: Punch mild steel, aluminum, fiberglass and plastic. Hole Sizes/Conduit Sizes - Hole size is outside diameter of US conduit sizes. Example: 1/2" conduit size punch actually makes a 7/8" hole. Pg Sizes: European standard pipe sizes. ISO Sizes: International Standards Organization pipe sizes. Operation: Battery, hydraulic, ratchet or manual drivers. When used with ratchet, hydraulic or battery drivers, buy the punch and die only; the draw stud is part of the driver kit.
Description:
- Round Standard Metal Punch Units are complete units consisting of punch, die and draw stud.
- Use with battery-powered, hydraulic, ratchet or manual drivers.
- Properly assembled through pilot holes, they will make clean, fast and accurate holes. |
|
The strong point of the threephase model OIL 440 is that it can separate the vacuumed swarf and liquid and return the filtered liquid to the machine tool where it can be used again.
The machine is equipped with an ejection pump , so the liquid can be expelled during the vacuuming operations, in this way using the vacuum is fast and efficient ("E" version) in the same time.
|
|
The singlephase CFM SOL 3000 is the most powerful of the CFM SOL series: three independent motors, 3000 watt power, 100 litres container and external manual filtershaker. SOL 3000 particularly is projected for mechanical industry therefore is able to vac solid, liquids and oils, typical refuse elements of the mechanical production.
|
|
Thanks to the 40-years of experience in this specific industry, RIBO designs and manufactures reliable and robust industrial vacuum cleaners, partcularly fit for all the cleaning and maintenace operations of metal working/cutting machines.
In fact, RIBO industrial vacuum cleaners can vacuum solid and liquid materials, also simultaneously, allowing to pre-separate materials inside the container, in order to facilitate wasting/recovering operations of vacuumed materials.
Reaffirming the well-established characteristics of QUALITY, RELIABILITY and ROBUSTNESS, RIBO gives to its machines 3 YEARS WARRANTY for single-phase machines and 5 YEARS WARRANTY for three-phase machines. |
|
| The Tecnoil range is especially designed to suck up, clean and recycle the oil and coolant on machine tools. Single and three-phase models from 3 to 15 HP, capacities from 150 to 700 litres. |
|
- Power: between 6 and 11 kW
- Air flow: 660 to 1220 m3/h
- Vacuum: 5700 to 6500 mm/CE
- Filtering surface: 12 to 32m²
- Capacity: 100L |
|
- Power: between 2.4 and 6.5 kW
- Air flow: 350 to 1060 m3/h
- Vacuum: 2500 to 6200 mm/CE
- Filtering surface: 9.5m2
- Capacity: 80L |
|
| ... products without technical information |
| |
Some of the features of these models:
• 4 different models:
NX3 (x-y-z): 400 x 300 x 300 mm
NX4 (x-y-z): 600 x 400 x 400 mm
NX6 (x-y-z): 1000 x 600 x 500 mm
NX7 (x-y-z): 1500 x 750 x 650 mm
• Machines designed to facilitate the automation of work of every kind, with lower outlay cost. They can incorporate a 40-position electrode changer (ø 51 mm – 2 inches).
• A newer, faster, more powerful ONA-S64 CNC, with Windows-based platform, enabling an Ethernet connection allows for reports on machines performance to be sent to mobile phone or PC.
• New function A-SPACE (Axis for erosion in SPACE). With this function, any programmable CNC erosion function (spheres, taper machining, orbital machining, vectors, etc.) can be carried out in any spatial direction.
• New module 3D SETUP that includes an extensive set of automatic measurement cycles (automatic balances in any direction of the space, a utomatic alignment of the axis-machine to the axis-piece, etc.)
• CNC with Expert Erosion System that ensures 100% performance without supervision (with surface finish to VDI =0 - Ra 0.10 µm).
• The mechanical design of the fixed bedframe allows wide travels on the X and Y axes, a high load capacity and high stability.
• Large cost savings. The filter fitted in the NX machines is totally automated and guarantees over 10,000 hours of operation with zero maintenance costs. Filtering quality is excellent (1 µm).
|
|
ONA DB series
- New high-speed pulse technology, which allows to get the following results:
* Shorter machining times in jobs that involve very difficult flushing.
* More homogeneous finish on large surface areas (VDI 20 on 225 cm²).
* Very deep grooves can be machined, with the highest quality and precision guaranteed
(VDI 20 up to 100 mm).
- The Expert System featured in the generator of the ONA DB 300 models ensures totally automated production with one hundred percent performance and an excellent finish.
- Surface finish of up to VDI = 0. This machines include a high-performance generator in removal operations, while at the same time preserving the electrodes and allowing excellent performance in fine finish mode (up to VDI = 0).
- Subsurface injection function. A great aid to speed when the injection points required by a mould are being realized.
- Important savings. The filter featured optionally in the ONA serie DB machines guarantees over 10,000 hours in operation with zero maintenance costs. Filtering quality is excellent (1 micron). |
|
| The EA8-M and EA12-D are characterised by best eroding results and long-term accuracy. They are fit for all areas of application, from fast roughing up to finest smoothing. With the proven generator and 64 bit control technology they satisfy highest demands in daily use for all eroding applications. User-friendlyness and flexibility are the basic principles for this. The EA8-M and the EA12-D allow the machining of almost all materials, from Carbide and Ampcoloy up to Aluminium and Steel. The AC servo drive with digital outputs achieves a 50% reduction of removing time as well as an increase of the removing rate. Removing time and eroding time are optimised by an "artificial intelligence"; the machine "learns"! |
|
| The EA8-M and EA12-D are characterised by best eroding results and long-term accuracy. They are fit for all areas of application, from fast roughing up to finest smoothing. With the proven generator and 64 bit control technology they satisfy highest demands in daily use for all eroding applications. User-friendlyness and flexibility are the basic principles for this. The EA8-M and the EA12-D allow the machining of almost all materials, from Carbide and Ampcoloy up to Aluminium and Steel. The AC servo drive with digital outputs achieves a 50% reduction of removing time as well as an increase of the removing rate. Removing time and eroding time are optimised by an "artificial intelligence"; the machine "learns"! |
|
Die sinking by EDM of molds - quicker, more accurately and more economically.
Production cell for the fully automatic die sinking by EDM of single and multiple component tools, multi cavity tools and hard metal dies. |
|
| It can be universally applied and permanently reduces your operating costs: the EA12-V series. On account of its reliability, capability and availability, it is one of the most sought after erosion systems in the world. Its high-quality design and multifaceted technological innovations are equally as persuasive. The newly developed high performance FP80V generator provides the highest productivity and best results on the work piece. The generator's strengths are fully utilised with regard to the processing of tungsten carbide - even with standard copper electrodes. The combination of the lowerable working tank together with the optional left/right hand placement of the generator/control cabinet, makes automation as flexible as possible. The EA12-V which is constructed with a solid, cast steel frame also has a digital direct drive as well as an absolute measuring system. In addition, the EA12-V is equipped with a direct linear way measuring system that guarantees consistent precision. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
