|
|
The alternatives to foreign shipments: ancali or palletts of cardboard Benches cardboard waved Produced in the dimensions of mm.600x400 for a capacity of Kg.200 and milimeter 600x800 for one capacity of Kg.400 and in other measures and capacities upon request.
Our benches have been subordinates to laboratory tests that have demonstrated a resistor to the jam, for the bench of 600x800, beyond 2000 Kg. (B.C.T.) and of absorption water of COBB 30 ' gr/mq 250
Realized in cardboard completely waved they are therefore completely riciclabili. They do not demand treatments for export; light but with good capacity. The bread-board standard EUR 1200X800 has been tried with cargo of 800 kg
APT FOR the EXPORT IN COUNTRIES WHERE the SHIPMENT ON PALLETS OF WOOD IS PROHIBITED:
IT DOES NOT DEMAND PHYTOSANITARY TREATMENTS OF FUMIGATION OR CERTIFICATES;
TESTED TILL 1000 KG. OF IMPILAMENTO;
THEY WORKS, POURED THEM, ECONOMIC;
TO 4 WAYS, THEREFORE APT ALSO FOR PALLET TRUCKS;
REDUCED WEIGHT: ONLY KG. 4,5 AGAINST KG. 20 OF A TRADITIONAL BENCH.
It is POSSIBLE TO USE the BENCH IN COUPLING TO ENCLOSURES 80 X 120 OF BASE.
The benches or pallets in cardboard can also be realized by means of travotti adesivizzati componibili, concurring adaptability with any your format. We make also solutions assiemate with cardboard honeycomb for large amounts. These all the obvious advantages for the benches or palletts of cardboard from produced we. |
|
| As double pallets with 6 runners, the S5BL-R and S4BL-R offer a very high load-carrying capacity. Steel profiles in the upper deck provide for additional stability. Thanks to the use of HDPE regenerate as the construction material, they make an outstanding and economical solution for goods with unusual dimensions. |
|
IT PACKS FOR CHINA FREE FROM CERTIFICATE FITOSENITARIO
With the entrance in vigor of the new communitarian and extracommunitarian regulations in matter it acclimatizes them and of emergency, we have conceived a series of footrests in waved cardboard apt to satisfy the several requirements of market.
The facility and the speed of assemblage, like demonstrated in the photos, constitute an important prerogative of these footrests.
MATERIAL
Waved cardboard reinforced, accredited from institute BFSV, to double and triple wave.
TIPOLOGIE AND FORMATS
Footrests of the type standard and for octagonal containers in the dimensions of cm. 120x80-120x100-110x110 to 2 and 4 ways.
CAPACITY
According to requirement demands from the customer
CHARACTERISTICS DETAILS
Lightness, Economization, low I block in storage, biodegradability and riciclabilità
WEIGHT
A footrest from 120x80 hanging scales approximately KG.5 against KG. 25 of the same footrest in wood
I BLOCK
For 100 pieces it is had I block of 2,83 cubic meters before the assembly with a saving of 85% approximately regarding the wood.
|
|
PLASTIC PALLETS - HEAVY PAYLOADS
Structured to work with particularly heavy payloads, are suitable for use on racks up to Kg 1,000. The payload surface and beams are moulded together in a single shot. Thanks to the special production process used, it is made in heterogeneous plastic obtained from recycled plastic and packaging.
QUALITY - TRACEABILITY - CAPACITY
The My-I and My-I Bis Pallet are light-weight and rugged pallets with long durability. The pallets are grilled and the ones in the version without runners are nestable. They can be provided with from RFID microchips with 13.56 Mhz transmission standardized at world level. The installed chip is of the rewritable passive type able to receive and transmit all the identifying data of the goods on line. |
|
- Steel Pallet
- zinc plated / plastic spraying
- OEM design is available.
- competitive cost with excellent quality
Each order requests a minimum order value of USD12,500. Otherwise extra handling fee of USD200 per order will be charged. |
|
PLASTIC PALLETS
NESTABLE PALLETS - LIGHTWEIGHT PAYLOADS
My-L PALLETS 800X1200 and 1000x1200 mm, My-N PALLETS 1000x1200 and 1200x1200 mm, are lightweight and resistant and can also be used as “non returnable pallets”.
MEDIUM PAYLOADS – ALVEOLAR GEOMETRY OF THE SURFACE
My-A PALLETS 800x1200, 1000x1200 and 1135x1135 mm, are rendered far more robust and solid by their totally new concept of honeycomb structure, which makes them ideal for intensive use.
The collection is completed by the HALF-PALLET version 600x800, which is half the size of the standard dimensions, as the name implies.
|
|
| The C5C-Non-Stop is a clean and efficient solution specially developed to the printing industry, and is perfect for use on such equipment as Heidelberg printing machines. The C5C-Non-Stop can be used for the transport of all popular sheet sizes, and is also ideally suitable for closed circuits. Smooth operation in non-stop processes is ensured by the optimum design of the deep-drawn pallet surface, which also enables extremely convenient use for rake intake by printing machines. |
|
Craemer plastic pallets are a good investment for use inside the factory for storage and transportation purposes, as well as pooling. They satisfy all demands for economy, durability and capacity to support heavy loads just as well in their use in high-bay warehouses or on automatic conveyor systems. Whether for use in the food, automobile or numerous other industries the Craemer plastic pallet-program always provides an economic basis for logistics.
Beside plastic pallets in the dimensions 1200x1000 amd 1200x800 the program includes also half-size pallets (800x600) and special sizes such as: the double pallet (1200x1600), for example. |
|
Craemer plastic pallets are a good investment for use inside the factory for storage and transportation purposes, as well as pooling. They satisfy all demands for economy, durability and capacity to support heavy loads just as well in their use in high-bay warehouses or on automatic conveyor systems. Whether for use in the food, automobile or numerous other industries the Craemer plastic pallet-program always provides an economic basis for logistics.
The program includes for example pallets in the European size (800 x 1200) and in the industry-size (1000 x 1200).
Besides pallets made of unmixed HDPE or polypropylene, Craemer has also various pallets regenerated from regranulated HDPE on offer.
For special purposes Craemer manufactures also “conductive” pallets which are not electrically charged.
Craemer has set the standard in the food and meats industry with the H1 pallet which was recommended by the HDI (European Institute of Commerce) as the first plastics pooling pallet.
The CR1 is the first plastic pallet in serial production equipped with 2 transponders (13,56 MHz).
The CR3 takes its typical constructional features from the successful CR1. With the measurements 1200 x 1000 mm the CR3 plastic pallet is available with 3 or 5 runners. |
|
SOLID BASES FOR YOUR WORK - 1999
These modular floor mat elements ensure that you have a safe, resistant base under feet, both indoors and outdoors. Both the grilled and the full surface versions are insulated, non-slip and suitable for all sorts of industrial environments, where they will absorb vibrations and dampen the noise generated by machinery. Also available in a version resistant to acids and corrosive liquids.
EPSILON - A modular grilled version with a system that hooks the various elements together for easier installation. Resistant to acids, solvents and fats. Epsilon comes complete with a side and corner joint for even more functional floor paving.
EPSILON PLUS - A full surface modular floor system that guarantees perfect adherence to the surface. Also available in self-extinguishing and conductive versions. It comes complete with a side and corner joint for even more functional floor paving.
SIGMA - Sound-absorbing modular elements made of shockproof green resin.
GRATED PLATFORM ¬- A non-slip grilled surface, also resistant to the long-term effects of damp, requires no maintenance.
|
|
PLASTIC PALLETS
Efficiency that never rests. Lightweight, resistant and with non-slip surfaces, Martini Alfredo pallets are made of synthetic resin: unlike models made of wood, they are rot-proof and require no fumigation. They can be forked from all four sides and can be stored in the open. The version with runners is ideal for use with transpallets and forklift trucks with rotating forks.
FLAT/COVER FOR PALLET: the flat for pallet is totally closed and smooth, adapts to all 800x1200 pallets. It can also be used as top / cover for goods loaded on a pallet. The containment edges are purposely interrupted to accommodate the strap.
MAIN CHARACTERISTICS:
1)ROBUST.Can hold with a static load of up to 7,000 kg and a dynamic load
of up to 1,500 kg.
2)RESISTANT TO DAMP. Unlike wooden pallets, Martini Alfredo S.p.A. pallets
are resistant to water and dampness.
3)LIGHTWEIGHT. Light weight makes all handling operations extremely
practical and straightforward.
4)CONSTANT CALIBRATION. Can be used in computerised packaging
systems.
5)ENVIRONMENTALLY FRIENDLY. Martini Alfredo S.p.A. pallets are
completely recyclable and reusable.
6)WASHABLE. Cleaning and maintenance are very easy.
7)SUITABLE FOR FOODSTUFFS. Versions for use with foodstuffs are also
available.
8)ELECTRICAL INSULATION. The entire range guarantees excellent
electrical insulation.
9)IMMUNE TO CHEMICAL AGENTS. This synthetic resin is not corroded by
acids and solvents.
|
|
Kaysersberg Plastics is one of the foremost suppliers of plastic pallets. We have a superb range covering:
-Low cost, expendable, one trip pallets for export
-Mid range multi-trip pallets with excellent performance characteristics
-High performance, long lasting pallets for closed loop systems
We design and develop our own pallets using three manufacturing technologies and two types of plastic materials, namely:
-Low pressure structural foam injection moulding
-Thermoforming
-Vacuum forming
-Polyethylene
-Polypropylene
This means we can offer customers a service which is in complete control of all key elements - design, material and manufacturing process. |
|
| The H1-F has been specially developed to meet the requirements of the fish industry. The H1-F is particularly economical and durable, and stands out for its extraordinary robustness and reliability. In combination with its outstanding hygiene characteristics, it has established itself as the standard in the fish industry. Thanks to the special arrangement of the retainers, it is ideally suited to the transport of Euro fish crates, making a matching and efficient reusable system. |
|
| The Euro H1 is expressly recommended by EHI, and has established itself as the standard in the European foodstuffs industry. The fact that it can cope with even the highest stresses is confirmed by the Fraunhofer Institute in Dortmund. It is also the first plastic pallet that has been awarded the GS symbol for “tested safety”. Developed specially for the meat industry, it offers the perfect basis for standardised crate systems. Made of high-quality HDPE, nothing can destroy its shape, and it remains stable even at temperature differences from -40 to +70 °C. |
|
LOWERED INKA PALLETS PROMO REDUCTION IN PRICE 8% AT LEAST 6 CONFECTION
STANDARDIZED MEASURES
Expiration fine October 2007
|
|
Craemer pallets are generally stable in shape, strong and durable. So that we can also keep this promise for our regenerate pallets, we use only pure regenerate compounds for the production of these economical alternatives.
The wide-range of versions, including half-pallets, euro-pallets, industrial pallets and even double pallets, offers a wide range of application possibilities in the non-food sector.
|
|
PLASTIC PALLETS
PALLETS WITH RUNNERS - LIGHTWEIGHT PAYLOADS
The lightweight payload models, My-L BIS 800x1200 and 1000x1200 mm, My-N BIS 1000x1200 and 1200x1200 mm, guarantee a high degree of robustness and solidity.
PALLETS WITH RUNNERS - MEDIUM PAYLOADS
ALVEOLAR GEOMETRY OF THE SURFACE
PALLET My-A BIS 800x1200, 1000x1200, 1135x1135 mm: the medium-payload My-A Bis models all feature the new honeycomb structured surface, which lends even greater hold and resistance than ever.
|
|
Jumbo pallets. 3/1 stacking to triple the use of floor space.
Jumbo pallets save space when not in use. |
|
| Utz Insulating Boxes in a variety of versions and sizes are setting the standard. Whether for keeping things cold or hot, they are ideal for use in gastronomic businesses, retail shops, the catering trade etc. They are easy to clean and suitable for food use. When used in conjunction with a cooling element, chilled or deep-frozen products remain perfectly fresh for many hours. |
|
Our Metal Palet (PM) model benefits from various technical features: 2 or 3 skies, slick or profiled sheet iron, loading plate height, pitchfork position, dimensions, mechanical engineering and finishing.
A robust model, load resistance: 800 to 2000 kg according necessities and application. |
|
These products are a valid alternative to the classical wooden boards in that they are stronger and can take heavier loads. The wide variety of types allows maximum flexibility in handling and storing in the most diversified production sectors thanks also to some versions with a wooden bottom. The range is completed by specific bar holder supports.
|
|
| A range of GRP gratings made from Isophthalic resin making them more corrosion resistant than Securiline. Ideal for applications where contact with corrosive substances is substantial : certain manufacturing, chemical processing plants, Nuclear Power Stations, certain offshore, etc. All areas where there are walkways and stairways prone to slippery conditions. |
|
- Tough, robust construction - ideal for intensive use.
Highly resistant to impact damage from forklifts.
- Rigid structure for minimum flex on racking and fork lifts.
Safely ravcks loads of up to 1.0 tonne for standard models,
- and up to 1.4 tonnes for steel reinforced versions.
- Compatible with all handling equipment.
- Collar holds loads in place and corners allow secure stretch wrapping. Incorporates anchorage points for attaching pallet covers. |
|
The benefits of UTZ plastic pallets:
* Long life
* No splinters and no nails, therefore no danger of rusting
* No sharp edges
* Acid and alkali resistant
* Dimensionally and temperature stable
* Odourless and tasteless
* Suitable for use with fork lift trucks
* Non-water -absorbent, therefore consistent weight
* Non-rotting, impervious to mould
* Euro and ISO standard dimensions
|
|
Ideally complets traditional shelves equipment, a useful solution because of its adaptability and its disassembling capacity.
Composed by a metallic base and four encasable metallic tubes. |
|
These products are a valid alternative to the classical wooden boards in that they are stronger and can take heavier loads. The wide variety of types allows maximum flexibility in handling and storing in the most diversified production sectors thanks also to some versions with a wooden bottom. The range is completed by specific bar holder supports.
|
|
benches standard
benches and pallets on measure
two ways or quatttro ways
epal and marchiati eur
pressati and incastrabili benches inka
|
|
MEASUREMENTS:
Total height: 150 mm.
Base: 1000 x 1200 mm.
PRINCIPAL CHARACTERISTICS:
* Arranged 3 skates in sides of 1200 mm.
* Capacity of load 1000 Kgrs.
ENDED IN:
Painted Blue color RAL 5010.
OPTIONAL ACCESSORIES:
* Ended in Galvanized. |
|
Product Specification
- Ext. Dim 1200x1000x207 mm
- Int. Dim 0x0x0 mm
- Material MDPE
- Load 1000
- Capacity 0 Litres
- Weight 20 kg |
|
MEASUREMENTS:
Total height: 585 mm.
Useful height: 350 mm.
Base: 800 x 1000 mm.
Weight: 45 Kgrs.
PRINCIPAL CHARACTERISTICS:
* Stackable to 5 heights.
* Capacity of load: 1 and 1,25 tons.
ENDED IN:
Painted Blue color RAL 5010. |
|
|
|
