|
|
DEBUS compressed air vacuum cleaners are distinguished by the following features:
- Robust construction for many years of active use (e.g. plastic coated steel, stainless steel or high density plastic)
- Almost unlimited applications in all areas of industry.
- Six different types of filter can be supplied to meet the requirements raised by the dusts and powders to be removed. The filters also comply with DIN EN 60335-2-69 Appendix AA and come complete with a BIA (Berufsgenossenschaftliches Institut für Arbeitssicherheit – Professional Institute for Industrial Safety) test certificate.
- When fitted with a floatation device they can also be used for the suction of liquids ranging, for example, from water to sludges.
- As an optional extra, all machines can be supplied with explosion protection complying with the current ATEX regulations.
- The equipment is emptied using detachable containers, a silo valve or directly into the customer’s own refuse containers.
- Moveable and stationary versions can be supplied.
- Infinitely variable manual drive or automatic control using pre-programmed electronic controls.
- Resistant to cold and to extremely hot materials.
|
|
We have the widest range of commercial vacuum cleaners – offering cleaning professionals the exact solutions they need. We have highly competitive, yet powerful, vacs for facility cleaning. They are built to last.
Nilfisk-Advance is constantly developing breakthrough designs in order to meet new cleaning challenges. They include daytime cleaning in noise-sensitive areas; having to clean in a very short space of time like on aeroplanes; or in heavily furnished areas or on stairways with the highly ergonomic backpack vac, the Nilfisk Backuum™.
Cleaning rooms with very demanding hygienic standards like in hospitals or anti-allergic hotel rooms can be met with HEPA-equipped vacs.
HEPA (High Efficiency Particle Air) filtration means dust separation of 99.97% of particles down to 0.3 microns (one micron=millionth of a meter).
With outstanding performance and features like easy emptying and corrosion resistance, our range of wet and dry vacs meet demanding wet applications in e.g. kitchens, pool areas and picking up fluid spills.
Our range of vacuum cleaners encompasses:
dry vacs
ergonomic backpack vacs
uprights
wet and dry vacs.
|
|
Compressed air vacuum, essential where there is no electricity or when its use is forbidden, such as chemical, painting and steel industries and refineries.
It can also be a valid and economical alternative to the explosion-proof versions. It is available with container 60 or 100 lt capacity.
|
|
RIBO COMPAIR vacuuming units stand out for the total absence of electrical and electromechanical components and moving gears.
The application of a simple and effective production technology, which exploits the total lack of frictions and mechanical settling movements, enables to achieve reliability and quietness beyond any expectations.
All the RIBO COMPAIR industrial vacuum cleaners are available in ATEX cetrified (as per EEC/94/09 regulations) configuration, in 2G/D category, fit for use un classified zones 1,21 and 2,22
Reaffirming the well-established characteristics of QUALITY, RELIABILITY and ROBUSTNESS, RIBO gives to its machines 5 YEARS WARRANTY. |
|
SOL 5W the new industrial vacuum cleaners for liquids and solid materials, features a performance to perfectly satisfy any cleaning and maitenance issue. Equipped with a turbine motor of 4 kW power, needs no maintenance, grants the highest reliabilty and can work 24 hours a day.
|
|
Customers’ expectations are met with regards to reliability, suction power, task-specific filtration, safety and ease of use. With our expertise in process-integrated cleaning and cleaning equipment for manufacturing areas, we can provide end-to-end cleaning solutions for the vast majority of industrial operations.
The industrial vac range spans from the GM 80P single-phase machine to large three-phase machines designed for process-integrated cleaning and fixed installations. They come with piping systems and pre-separators capable of handling several cubic meters of dust/debris per day.
They remove dust and dry waste like metal grindings and swarf, paint powders, chemicals, plastic cuttings and ceramic sands. And there is a range of vacs for wet applications – e.g. for removing oil and lubricants.
The Nilfisk-Advance industrial vacs are built to last – they are mainly built of steel or stainless steel. They can work with or without bags. They meet or exceed the filtration standards for removal of e.g. hazardous dust. They also feature explosion-proof collection of e.g. flour, saw dust from hard wood or even metal.
Use of industrial vacs also means a better and safer environment for employees. |
|
15 ATEX
When the atmosphere becomes explosive, the new mod. 15ATEX comes into action!
The singlephase mod. 15ATEX is ideal for the zone 22. Small, compact and easy to move, it is powerful and reliable. It is composed by high quality components: antistatic wheels and filter, it is grounded and it can be built with the SAFE BAG and with an Hepa 14 filter for toxic material. |
|
RIBO industrial three-phase vacuum cleaners from 0,44 to 1,1 kW have been specifically designed to be connected to automatic equipment of any kind, wherever compact design, low level of noise, high performances, continue duty are requested.
RIBO has always developed equipments specifically designed for the appliances in packaging. Compact design, wide range of configurations and high performance make RIBO machines suitable to be connected to automatic equipment of any kind, either for local vacuuming of working scraps, either for develop local vacuum conditions to keep hold/push the material.
RIBO vacuum cleaners are available in plasticized steel and stainless steel AISI 316, suitable for foodstuff and pharmaceutical materials.
RIBO machines can be equipped with a wide range of filtering devices, for vacuuming the widest variety of materials.
The well-established experience in various sectors make RIBO able to operate any kind of customisation, to satisfy in the most effective way any need of industrial vacuuming.
Reaffirming its well-established characteristics of reliability and robustness, RIBO grants on its machines a warranty up to 5 YEARS.
|
|
| Designed to meet the cleaning challenges of today’s busy cities, the Madvac 101 is a high profile, cost-efficient cleaning machine that safely and effectively cleans city sidewalks, parks and streets. |
|
| Based on the successful Madvac 61, the new Madvac LX300 meets the needs of high volume litter collection in hard-to-reach areas, and virtually transforms the manual litter picker into a highly automated efficient vacuum litter collection system with increased productivity rates in excess of 1200%. |
|
With a 415L debris recovering capacity the ATLV™ 4300 is designed to clean safely, efficiently and cost-effectively on parks, school grounds, city sidewalks, leisure centres, recreational areas, amusement parks, shopping centres and even zoos.
The ATLV™ 4300 cleans surfaces ranging from asphalt to concrete to grass, and also picks up hard-to-reach litter in fences. |
|
Since 1968 manufacturer of industrial vacuum cleaners, RIBO praises a well-established experience in plumbing and sanitary fittings industry.
MICROSOF, portable blowing/vacuuming unit, is the result of the steady attention that RIBO pays to the Operators in cleaning and maintenance of wall-type gas boilers.
Its peculiar features make it particularly suitable for cleaning and maintaining operations of:
- Wall-type gas boiler cleaning
- Air conditioning units
- Photocopy machinery
In addition to that it is suitable for professional use to clean equipment like: saws, drills and corers.
MICROSOF is a compact-size, light and easy-to-handle mochine, granting over the time the highest levels of QUALITY, RELIABILITY AND ROBUSTNESS, such as all RIBO industrial vacuum cleaners.
The double use as blowing vacuuming unit, the specific equipment included and the extreme facility in use, as far as the stylish look, the reduced noise level and the filtering efficiency, make MICROSOF the ideal machine for all the operations of cleaning and maintenance at Custromer's home.
Reaffirming the well-established characteristics of quality, reliability and robustness, RIBO gives to this machine 3 YEARS WARRANTY. |
|
Portable Vacuum Systems
- Capacity: 36L (9.9 Gal.) or 64L (17Gal.)
- Voltage: 230V/50 Hz or 110V/60 Hz
- Ideal for use with Dynabrade® Vacuum-Ready Air Tools for removal of dust and debris
- Variable Vacuum Control based on type of tool and work surface
- Vacuum starts and stops with use of Tool. Saves time and conserves energy
- H.E.P.A. Filtration: Retains 99.97% of ultra-fine particles, as small as 0.3 microns in diametre
- Two-Tool Setup function allows more efficient use of workshop space
- Electronic Thermal Protection device prevents overload of motor
- "Tilt 'n Clean": Drum tilts easily backward for quick emptying
- Two Innovative 6m (20") lightweight coaxial hoses
|
|
New range of Nilfisk backpack vacuum cleaners
Nilfisk-Advance has introduced its GD 5 / GD 10 range of back-pack vacuum cleaners. Aimed primarily at cleaning contractors and institutional maintenance departments, these units complement the company’s existing backpacks to provide productive and ergonomic cleaning in all applications.
The GD 5 / GD 10 backpack vacuums were recently evaluated in an
independent set of test studies conducted by the Sweden-based Två
Ergonomer testing and ergonomic consultancy bureau. The study
compared the Nilfisk model to three other internationally recognised brands of backpack vacuum cleaners. In its report, the bureau concluded that the Nilfisk GD 5 / GD 10 rated “better than rivalling backpack
vacuums on all design criteria”. The ergonomic evaluation further noted the importance of the Nilfisk unit’s lighter weight and overall harness design in minimising stress and strain on the body.
Additionally, the Nilfisk unit achieved higher productivity rates in the studies carried out. The ergonomically advanced harness design was mentioned as being an important factor in allowing work to be carried out at a faster rate. |
|
Very small and light, the new model 118 has new features which make it more ergonomic and easy to use. It is supplied with a new release system which enables you to easily remove, lift and carry the container on castors. It is possible to equip the vacuum with an optional container fitted with an inlet, a paper bag and a cap to close the upper inlet of the vacuum. It is classified according to the new L-M-H norms (EN 60335-2-69).
|
|
127
At last, a compact single vacuum with all the features of larger model.
Mod 127 is a compact 2 singlephase motor industrial vac. It's available in L M H versions where classified dusts have to be removed according to the EN 60335-2-69. It's also available in Stainless Steel: just container or container and filter chamber. |
|
137 is conceived to operate in industrial environments. It
is provided with the latest technologies to grant maximum
reliability and best performance.
This model is particularly suited to recover shavings and
oils from working machines in metalworking sector, debris
in the building/ceramic sector, nap and waste in the textile
sector, dust and grains in the food/cereal sector.
137 can also collect corrosive substances, using the
stainless steel bin and, if necessary, the stainless steel filter
chamber. |
|
The new threephase model 3508W, suitable to be used in many industrial sectors, allows a continuous growth of safety and profitability.
CFM considers this vacuum the leading model of its range, as it can solve all the problems concerning the cleanliness of the work environments. The modularity distinguishes the 3508W, which can be used for different applications.
New absolute filter, new electrical filtershaker, new accessories compartment, new upstream safety filter, and new bagging methods: these are some of the new features of this machine.
It is available in two versions: with major airflow or with major depression.
|
|
Threephase industrial vacuum for trims and waste. It is used in packaging, food, textile and phamrmaceutical productions.
Versions:
- painted version (R 305 V)
- stainless steel version (R 305 V)
|
|
RIBO, thanks to its 40-year experience in this sector, offers a complete range of industrial three phase vacuum cleaners, from 0.44 to 22 kW, available in different models and executions, suitable to be used in any condition.
These models are also available in ATEX configuration, as per EEC/94/09 regulations (ATEX regulations), in II 2G/D and 3G/D category, fit for use in classified zones 1,21 and 2,22.
Reaffirming the well-established characteristics of QUALITY, RELIABILITY and ROBUSTNESS, RIBO gives to these machines 5 YEARS WARRANTY. |
|
The structure of this threephase version is the same as the CFM 3156 model but it is larger in size and higher powered (2.2 kW or 3 HP) in order to offer increased performances with a greater filter area.
|
|
For very heavy duty and continuous service. This threephase vacuum can be connected to the centralized general cleaning or pneumatic conveying systems used in various sectors such as the agricultural-food production or metal-working industries. Many optionals facilitate work where the vacuumed materials are particularly heavy or in large quantities. The electric filter shaker is standard supply.
Versions
- version with the cartridge filter (3997 C).
|
|
ECO-OIL series by Nilfisk-CFM is composed by two models: EC-Oil 13 (1,3 kW) and Eco-Oil 22 (2,2 kW). How do OIL models operate?
Oil, liquids and swarf collection is achieved using an oil
resistant rubber hose. The liquid part is seperated from
the swarf - which is trapped in the swarf container - and
sucked into the tank; inside the tank there is an automatic
level control which cuts off the power when the tank is full.
At this point the liquid can be pumped back into the machine
tool through a pump, while the swarf container can be
emptied manually. |
|
Easy access to hard-to-reach areas quickly with the amazing portable Madvac 61 vacuum litter collector. It fits on a pickup truck or hitches as a trailer and sucks up windblown trash from landfill fence lines, parking lots and parks.
|
|
The new ATTIX 965-0M/H SD XC is the most powerfull two-motor machine that is approved to be used for both M and H-Class.
Featuring XtremeClean automatic filter cleaning and a corrorion-proof Stainless Steel Sit Down container that ensures durability and long life.
By choosing the correct container inlet the machine allows you to dispose the debris with a dustfree and there for safe solution.
The container is equiped with two inlets and two safety plugs:
- By use for M-Class dust, use the open disposal bag and the upper fitting.
- When vacuuming H-Class dust, use the lower inlet in combination with the safety filter bag and close the upper inlet.
The SitDown model is designed for mainly dry pick-up, but the machine features Bypass turbines that makes it possible also to vacuum wet debris. Wet debris will not damage the machine, but there is a risk of overfilling the container!
Applications:
• Wood working - hard wood
• Plastics industry
• Metal workshops
• Pharmaceutical Industries
• Food and beverage |
|
DC series
Collector made by stainless steel, powered by ChuanFan's RB and HTB series blowers. Both cyclone and bag-type collectors' design were adopted. Economically, mobility, and conveniently!
Suitable for sand spraying, grinding, sawing and other kind of processing. Also for collecting grain, pellet, stamping waste, and ... etc. |
|
| For almost all types of application for professional contract cleaning, Hako can offer interesting solutions to your cleaning problems e.g. wet and dry vacuum cleaners with tank capacities of up to 55 liters, single-disc and polishing machines of various sizes and capacities, carpet cleaning machines and spray extraction machines. |
|
GU 305
Best in its class!
The new Nilfisk GU series of uprights is designed to clean quickly, quietly and efficiently. With high-grade filtration and a HEPA filter option on all models.
They can be used for offices and hotels as well as in hospitals, nursing homes and elderly-care facilities. Easy to use, easy to handle, and built to withstand the inevitable knocks of everyday use, the new Nilfisk GU series takes upright vacuuming to a new level of efficiency.
Flat to the floor design for cleaning under furniture
Built in extension hose and tube for cleaning hard to reach areas
Excellent filtration system, HEPA available for all variants
Adjustable brush height to suit all floor surfaces
Dust bag is easy to change |
|
Since 1968 manufacturer of industrial vacuum cleaners and vacuum technologies for industrial applications, RIBO has always paid particular attention the the safety of its products.
From over 20 years RIBO designs and manufactures machines fit for use in dangerous environments, as per enforcing law.
The range of industrial vacuum cleaners as per EEC/94/09 regulations (ATEX regulations) features single-phase, three-phase and compressed-air vacuum cleaners , up to 11 kW, for safe vacuuming od dust, liquids and shavings also in potentially explosive atmosphere.
RIBO ATEX series are certified in 2G/D and 3G/D category: therefore, they are fit for use in classified zones 1/21 and 2/22.
|
|
V10
Wet & dry vacuum cleaner
Features & Benefits:
2-Stage high performing by-pass motor; superior vacuum performance, increases productivity and reduces life cycle cost.
Removable head; easy to operate and maintain.
Strong tank and head design; durable, safe and life cycle cost are reduced.
Standard tools; versatile and easy to use.
Applications:
Healthcare
Educational facilities
Shopping centres
Office buildings
Warehouses
Workshops
Hospitality sector
Specifications:
Total power consumption: 1200 W
Tank capacity: 16 L
Sound level: 70 dB(A) |
|
|
|
