|
|
The automation of odd-form component placement is economically justified when a variety of components need to be placed at high production rates. The flexibility of our equipment provides the automation capability of odd-form components even for variable batch sizes and a number of different component shapes to be placed.
|
|
S500 Functional Tester
A flexible, scalable high-performance functional test system tailored to meet your exact requirements for Module and PCB test. Rapidly and reliably giving you a Pass / Fail decision on any electronic module or PCB.
Test results can be passed to the PinPoint PCB Diagnostic Test System for rapid identification of any failure.
Designed to use industry standard hardware and software, the system can be configured and expanded to meet your changing test demands today and re-deployed in the future.
o Fully Integrated Test Solution
o Flexible open architecture (PXI, VXI, GPIB, Boundary scan)
o Complete solution - from design to through-life support
o Easy to use software Environment
o Fully scalable from desktop to multi-rack system
|
|
|
The pcba|inspector is a high-resolution microfocus X-ray inspection system designed for inspecting solder joints in board assemblies.
|
|
Special features:
Max. inspection area 24“ x 20“
Detail detectability of <2µ
Max. tube voltage of 100kV
Automated calculation of offset and annular ring width
Multiple-axis manipulation
Maintenance-free X-ray tube
Integrated noise suppression system
User-friendly image processing software
Easy and intuitive operation
|
|
DE-F SERIES
Mask-less, New Matrix Beam scan method Suitable for general PWB process with excellent cost-performance
|
|
| ... products without technical information |
| |
SureWeld 20™ Ultrasonic PlungeBonder™
Versatile and powerful machine seals large, multiple-layer or difficult-to-bond materials
Ideal for sealing box-style filters and filter bag ends, plus a variety of plastic assemblies and packaging
Accommodates different thicknesses of materials
Superior repeatable performance
Customizable welding horns, nests, and fixtures
Available as full press or actuator only for integration into an automated production line
|
|
RingMaster
Attaches heavy-weight felted filter bags to rigid plastic collars
Strong, reliable bonds are completed in less than 10 seconds
Eliminates stitch holes that cause leaks, and thread that can get caught in pumps
|
|
SpliceRite WS2016 / WS2026 Wire Splicer
Creates a true solid state metallurgical bond with the lowest possible voltage drop, and minimal energy consumption
Produces no arcs, sparks or fumes, and does not melt the wires
Microprocessor controller welds by height, energy or time, and can recall up to 250 weld protocols
Bonds wire bundles even if the wires are oxidized
1500 and 2500 watt power supplies are available
|
|
Sonobond Ultrasonic Bonders Offer Unique Advantages for Nonwovens and Textiles:
Cleanly cut and seal edges of synthetics and nonwovens
Eliminate fraying, unraveling, and material build-up
Need no needles, threads, adhesives, or other consumables
Four times faster than sewing machines
Ten times faster than adhesive machines
Minimal operator training required
Applications:
General purpose sewing
Lacing and quilting
Filters
Medical disposables
Cuffs and sleeves
Ribbons and trims
|
|
|
AUTOMATIC ANIMATRICE IN HF MOD. SALION Automatic machine of great reliability, ideal in order to thread whichever type of metallic spirit, normal schools with hinge monoblock or hinge flex in astine of celluloid, propionato acetate or is of shape parallel that pantografata, fustellata or iniettata, also of small dimensions. The machine is complete of automatism for the cargo of the auctions and the spirits.
|
|
Rosenberger offers a fully developed, complete family of mobilecom infrastructure site solution products: cable connectivity systems solutions for radio base stations - from the antenna down to the base station.
The RosenbergerSLink product range includes perfectly coordinated components in the hightest quality such as cables, connectors, tools and assembly accessories.
|
|
Air Logic manufactures a comprehensive line of nylon and polypropylene plastic fittings; the polypropylene fittings ar more chemically resistant than our standard nylon fittings. Polypropylene also provides more dimensional stability.
The fittings include Barbed Crosses, Elbows, Tees, and Unions. Barbs are available for 1/16", 1/8", or .170" I.D. tubing. The nylon fittings can be provided in black or white; the polypropylene fittings are gray.
|
|
|
|
|
|
Multiline - (4 / 6 / 8 Line) - QDC
Description: The snap-type multiple line quick disconnect features a releasing sleeve that permits one-hand connecting or disconnecting of several fluid lines simultaneously. Simply push the sleeve in to disconnect the fluid lines and push the internal and external ends together to connect the lines. The design incorporates a keyed location pin to insure correct orientation of the fluid lines during connection. The internal end is designed with an automatic shut-off valve.
Material: Internal: brass or 303 stainless steel components; acetal releasing sleeve; stainless steel mounting plate, springs, ball bearings, set screw, crescent “C” rings and steel “E” ring. External: 303 stainless steel components; stainless steel backing plate
Seals: Internal: three Buna-N O-rings, OR-QDC-B (3 O-rings), for each line. Optional materials: EPDM, Viton®, Silicone, Chemraz® and Fluorosilicone.
Note: Multiple line quick disconnect can also be ordered in 316 stainless steel and double shut-off configurations. Contact factory for ordering information.
|
|
Rotary Systems offers a unique line of low torque air/vacuum rotary unions. These unions are designed specifically for low speed, low pressure, air/vacuum applications that require minimal torque.
The unions utilize a hardened and ground shaft, o-ring seals and dual radial ball bearings to prevent side loading to the seals. The passages are 1/8” NPT and are offered in 2, 4, 6 and 8 passage models. The models shown in the picture are the 2 and 4 passage unions.
See our 028 series to view each size.
Please contact our Technical Sales department at 1-800-959-0146 for operating specifications and torque readings for each model.
|
|
|
|
|
|
TM Robotics offer a series of SCARA robots from the TH-250 through to the SR-1504. All have unique handling capabilities for varying workloads. The SCARA range can offer robots with arm lengths of 250mm to 1500mm, and workload capacitys from 3kg to 70kg.
Perhaps the most innovative of the Toshiba Machine SCARAs are the TH-250 and TH-350, which provide better accuracy and repeatability than comparable SCARA's, and offer quicker cycle times and faster motion. These new SCARA’s are so precise that they can even be used to good effect in the electronics industry. The TH-250 and TH-350 feature payloads of up to 3kg and repeatability of ?0.01mm. These robots are suited to applications in the handling of small components, such as electrical, mobile phone and camera parts, assembly and test equipment. Other applications that demand similar accuracy are hard disk drive assembly, as well as very high precision work, such as optical lens grinding and watch assembly. Furthermore, the TH-250 and TH-350 allow the user to place electronic components on PCB boards, or even handle the optical ‘pick up’ lenses used in CD and DVD disc drives.
|
|
S500 Functional Tester
A flexible, scalable high-performance functional test system tailored to meet your exact requirements for Module and PCB test. Rapidly and reliably giving you a Pass / Fail decision on any electronic module or PCB.
Test results can be passed to the PinPoint PCB Diagnostic Test System for rapid identification of any failure.
Designed to use industry standard hardware and software, the system can be configured and expanded to meet your changing test demands today and re-deployed in the future.
o Fully Integrated Test Solution
o Flexible open architecture (PXI, VXI, GPIB, Boundary scan)
o Complete solution - from design to through-life support
o Easy to use software Environment
o Fully scalable from desktop to multi-rack system
|
|
|
The pcba|inspector is a high-resolution microfocus X-ray inspection system designed for inspecting solder joints in board assemblies.
|
|
Special features:
Max. inspection area 24“ x 20“
Detail detectability of <2µ
Max. tube voltage of 100kV
Automated calculation of offset and annular ring width
Multiple-axis manipulation
Maintenance-free X-ray tube
Integrated noise suppression system
User-friendly image processing software
Easy and intuitive operation
|
|
DE-F SERIES
Mask-less, New Matrix Beam scan method Suitable for general PWB process with excellent cost-performance
|
|
The two twin-channel PME modules (MP85 and MP85DP) from HBM provide the optimum solution for monitoring press-fit and assembly operations.
Almost any commercially available transducer can be connected to the amplifiers which operate synchronously and in parallel. The industrial design and the standardized CANopen and Profibus DP interfaces, or digital I/Os alternatively ensure optimum connectivity to the automation environment.
Features and benefits:
Twin-channel amplifier
Comfortable integration into automation system via field bus interfaces
Intelligent signal conditioning and powerful algorithms for monitoring of the fitting process
Results can be saved directly in SPC format
Industrial design.
|
|
|
|
|
|
The PRO Module was developed for the monitoring of assembly and test applications. Its electronics are housed in a compact enclosure that is DIN rail mountabel for easy installation. The Ethernet port allows for easy communication back to the Promess application software running on a standard PC. Multiple PRO modules can also be network to a central data collection point. The PRO Module is powerful yet simple to use making it perfect for monitoring assembly applications such as press-fit, staking, crimping or riveting. On the other hand the system is powerful enough to tackle more demanding test applications where accurate hight speed data collection and advanced analysis are reuqired. Promess provides the complete system including electronics, software, sensors.
Promess will assist in the design and selection of the sensors best suited for your specific application as well as in the initial start-up.
Features
- In-process quality verification
- Part traceability
- 2 high speed 24 bis analog inputs per module
- 1 encoder input per module
- Compact modular design
- Defined database
- Data export funtions
- Fieldbus options
- Auto calibration for sensors
- Diagnostics for setup and trouble shooting
- Network multiple systems
|
|
| ... products without technical information |
| |
Feed and control unit ZSL151
Step conveyor
- For parts with coatings, paint finishes or delicate surfaces
- Integrated flexibly programmable control PLC and pneumatics
- Low vibration exit track, minimal vibration, low noise level
|
|
Feed units and systems
Vibration helical conveyor
- Universal use for small parts and connecting elements of all types
- Readiness and Conveying...
Feed and control unit ZSL151
Step conveyor
- For parts with coatings, paint finishes or delicate surfaces
- Integrated flexibly programm...
Feed- and control unit ZSU
Feed system and screwdriving process control
- compact feed system and process control in one unit
- Vibration spiral conveyor made from...
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
