|
|
| The pcba|inspector is a high-resolution microfocus X-ray inspection system designed for inspecting solder joints in board assemblies. |
|
Special features:
Max. inspection area 24“ x 20“
Detail detectability of <2µ
Max. tube voltage of 100kV
Automated calculation of offset and annular ring width
Multiple-axis manipulation
Maintenance-free X-ray tube
Integrated noise suppression system
User-friendly image processing software
Easy and intuitive operation |
|
Detecting manufacturing defects such as positional, missing, skewed, misplaced, incorrect device, incorrect polarity, solder and lead defects is fast and reliable. Unique dual lighting delivers the capability of inspecting laser marking on IC’s and SOT devices. An additional benefit is that it also delivers enhanced inspection of 0603 and 0402 devices.
Developed by DiagnoSYS for operator ease of use, this true AOI software is the most advanced available. Each system utilises the same software for extended ease of use. Comparator software, included, is a perfect solution for inspecting low volume assemblies without the need for programming.
Full manufacturing integration
The ScanPoint DT addresses prototype through to medium volume requirements complementing the ScanPoint 50 in-line system which targets medium to high volume. The family is complete with off-line programming allowing programs to be generated without interfering with production. Programs can be shared across multiple DiagnoSYS AOI systems. Data logging of test results is complimented with a full rework station capability |
|
In spite of all accuracy in the production process the repair / reworking of electronic PCBs belongs to the daily business. Relating to the components and used circuit boards (double-sided, Multilayer etc.) there are different requests imaginable. Also the quantity, in other words the complete quantity of repairs plays a decisive role. Beside the processes Dispensing, Placing and Soldering the process Removing und Cleaning of components is certainly added. Our µPlacer is a complex rework system, which considers all these elements with high precision.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
TM Robotics offer a series of SCARA robots from the TH-250 through to the SR-1504. All have unique handling capabilities for varying workloads. The SCARA range can offer robots with arm lengths of 250mm to 1500mm, and workload capacitys from 3kg to 70kg.
Perhaps the most innovative of the Toshiba Machine SCARAs are the TH-250 and TH-350, which provide better accuracy and repeatability than comparable SCARA's, and offer quicker cycle times and faster motion. These new SCARA’s are so precise that they can even be used to good effect in the electronics industry. The TH-250 and TH-350 feature payloads of up to 3kg and repeatability of ?0.01mm. These robots are suited to applications in the handling of small components, such as electrical, mobile phone and camera parts, assembly and test equipment. Other applications that demand similar accuracy are hard disk drive assembly, as well as very high precision work, such as optical lens grinding and watch assembly. Furthermore, the TH-250 and TH-350 allow the user to place electronic components on PCB boards, or even handle the optical ‘pick up’ lenses used in CD and DVD disc drives. |
|
The tank and the blade are out of stainless steel.
The depth and the beat of the blade adapt automatically to the level of filling, in order not to brew the components unnecessarily. Good resistance to clogging.
Ideal for the coated components, painted, or of which surface treatment polluting east.
High rates. (For example 5000 parts/hour for a screw M4x30.) Capacity ZSE 151: 1,5l.
Possibility of adding a hopper great capacity.
Mechanical selector Weber.
System in advance on rail without silentblocs. Balanced linear rail: few transmitted vibrations, low noise level.
The system makes it possible to distribute components without head. Management integrated for distribution alone, or distribution and unit of screwing (of installation). |
|
| The LAYING can be carried out with or without efforts of installation and thus allows the automatic installation of the rivets, the axes, the pins and the pawns with a control of effort so necessary. One can notice that its design is close to that of the screw drivers. |
|
WALL MOUNTING INSTRUMENTS
with one "ON or OFF" threshold and one output function 4 - 20 mA :
- pHM 200 : pH meter
- CM200 : conductivity-meter
- OXYM200 : oxymeter
- CLM200 : chlorometer |
|
WALL MOUNTING INSTRUMENTS
with one "ON or OFF" threshold and one output function 4 - 20 mA :
- pHM 200 : pH meter
- CM200 : conductivity-meter
- OXYM200 : oxymeter
- CLM200 : chlorometer |
|
Air Logic manufactures a comprehensive line of nylon and polypropylene plastic fittings; the polypropylene fittings ar more chemically resistant than our standard nylon fittings. Polypropylene also provides more dimensional stability.
The fittings include Barbed Crosses, Elbows, Tees, and Unions. Barbs are available for 1/16", 1/8", or .170" I.D. tubing. The nylon fittings can be provided in black or white; the polypropylene fittings are gray. |
|
Multiline - (4 / 6 / 8 Line) - QDC
Description: The snap-type multiple line quick disconnect features a releasing sleeve that permits one-hand connecting or disconnecting of several fluid lines simultaneously. Simply push the sleeve in to disconnect the fluid lines and push the internal and external ends together to connect the lines. The design incorporates a keyed location pin to insure correct orientation of the fluid lines during connection. The internal end is designed with an automatic shut-off valve.
Material: Internal: brass or 303 stainless steel components; acetal releasing sleeve; stainless steel mounting plate, springs, ball bearings, set screw, crescent “C” rings and steel “E” ring. External: 303 stainless steel components; stainless steel backing plate
Seals: Internal: three Buna-N O-rings, OR-QDC-B (3 O-rings), for each line. Optional materials: EPDM, Viton®, Silicone, Chemraz® and Fluorosilicone.
Note: Multiple line quick disconnect can also be ordered in 316 stainless steel and double shut-off configurations. Contact factory for ordering information.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
The Rexroth TS 2plus transfer system is a multi-talented system, which guarantees economic production. It is a diverse modular system that meets the requirements of a broad spectrum of different products.
Special TS 2plus units
Apart from the different types of conveying media (polyamide belts, toothed belts, flat top chains and accumulation roller chains), the TS 2plus also provides an abundance of specific units including curves, transverse conveyors, position and drive units. In addition to this, the time and effort spent on planning and designing can also be reduced to a minimum thanks to the predefined macro modules.
TS 2plus Heavy Duty
The new heavy-duty components of the Rexroth TS 2plus transfer system optimize transport of heavy workpieces on small surfaces. The systematic use of steel parts instead of synthetic ones in critical areas permits continuous loads up to 200 kg per meter. Reinforced conveyor profiles and stainless steel guides combined with sturdy conveyor chains open up new applications in a variety of industries.
TS 2plus Lean
Lower investment and maintenance costs, as well as fast commissioning, are the main features of the TS 2plus Lean. Its easy-to-install components are optimized for small and light products of up to 10 kilograms. Users are thus able to save up to 20 percent right from the procurement phase, as compared to conventional solutions. Low overall costs for linking manual workstations and automatic stations in the TS 2plus Lean system enable streamlined production in, for example, the automotive supplier industry, electronics industry, or medical technology industry. |
|
| ... products without technical information |
| |
aluminum framing for factory automation
We can offer the best China-made aluminmum extrusion profile and accessories of MODULAR ASSEMBLY SYSTEM, including 20mm, 30mm, 40mm,45mm,50mm,60mm profile and connection elements, fasteners(t-nuts, t-bolts, subsequent nuts etc.), leveling feet, hinges.
We have ten years experience in this field and got a well reputation in Chinese market. Since the year 2008, we begin to step into International market. International quality, Chinese prices, believe that we can bring to you more suprise. |
|
aluminum framing for factory automation
We can offer the best China-made aluminmum extrusion profile and accessories of MODULAR ASSEMBLY SYSTEM, including 20mm, 30mm, 40mm,45mm,50mm,60mm profile and connection elements, fasteners(t-nuts, t-bolts, subsequent nuts etc.), leveling feet, hinges.
We have ten years experience in this field and got a well reputation in Chinese market. Since the year 2008, we begin to step into International market. International quality, Chinese prices, believe that we can bring to you more suprise. |
|
|
