|
|
Fonon's Zero Width Laser Dicing Technology® (ZWLDT®) will cover unprecedented explosive growth and demand in semiconductor markets in China, Taiwan, Japan and Korea. This technology has lead to products, such as the BlackStar™, that offer the best in silicon wafer dicing over existing technologies.
ZWLDT® will slice the wafer much safer than mechanical saws that may cause wafer damage, and increase the yield per wafer as well as maximum throughput while minimizing the HAZ.
With the technology Fonon acquires, Fonon Display and Semiconductor Systems (FononDSS), has been able to launch a number of products that make the most of the technology for the semiconductor and flat panel display industry.
|
|
IPTE 's depaneling systems offer a unique combination of cutting tools, material handling and tooling to cut high technology panelized printed circuit board assemblies. They can be utilized in all kinds of production environments and can be seamlessly integrated, for example, in in-line manufacturing environments with automated ingoing and outgoing feeder units, and also be used in stand-alone configuration for manually supplied loading and unloading of boards.
|
|
LPKF MicroCut
Capable of cutting any shape without burrs
The LPKF MicroCut is a high-performance stencil laser. The LPKF MicroCut is capable of cutting any shape at up to 50,000 openings per hour.
The laser can cut apertures as small as 30 µm with a roundness better than 96%, and its effective material focus diameter produces sharp contours.
As a result of the new cutting technology post-treatment is not necessary anymore.
Absolute flatness of the material is reached also with highest component density by the new LPKF PulsShape function.
|
|
Panasonic's UV laser scriber has a complete laser optics bench that offers flexibility to fit the specific application - the result of PFSA's experience in high volume microelectronic manufacturing and expertise in productivity.
The laser scriber enables the non-mechanical scribing and dicing of wafers. Primary uses include application for low and ultra-low 'K' wafers as well as non-mechanical scribing over metalized portions in the wafer streets which enables smaller kerf widths - allowing for greater numbers of die per wafer.
The UV Scriber enables sample builds for next generation products and maximizes die-level densities to reduce costs and increase profits.
Features & Benefits
Low K scribing with superior quality over mechanical dicing
Next generation supported via sample builds
Configurable for development of future capabilities
Increase profits by optimizing die-level density
HVM capable today
|
|
Stealth Dicing Technology
In Stealth Dicing, a laser beam at a wavelength capable of transmitting through the material is condensed on an internal point in that material. This selectively forms a mechanical damage layer (stress layer) in a localized point near the light focus area so that the material is cut from the "inside". The operating principle of stealth dicing is fundamentally different from conventional blade dicing technology that cuts the material from the "outside".
|
|
| ... products without technical information |
| |
MAP Automatic marking, punching, shearing line for metal profiles - flat bars - angle sections - I - U - H- UPAF, etc.
MAP range: MAP 160 MAP 300 MAP 450
Universal, powerful and high-speed machines
MAP 160, 300 and 450 machines are flexible marking, punching, shearing systems for metal profiles, etc., designed to switch easily from angle sections to flat bars, or to I - U - H profiles.
The modular design makes it possible to adjust equipment capacities to user requirements at the lowest cost.
Access to tools, punches and dies, is easy and makes it possible to switch production quickly.
The MAP series punching-shearing lines are the only machines on the market performing in a single pass all operations normally carried out on beams:
- easy programming
- fast and precise
- flange and web punching in a single pass
- easy and quick machine adjustment.
These machines are especially suited to steel structure construction.
|
|
IPTE 's depaneling systems offer a unique combination of cutting tools, material handling and tooling to cut high technology panelized printed circuit board assemblies. They can be utilized in all kinds of production environments and can be seamlessly integrated, for example, in in-line manufacturing environments with automated ingoing and outgoing feeder units, and also be used in stand-alone configuration for manually supplied loading and unloading of boards.
|
|
ALFA range is designed for automatically punching, marking and shearing of profiles. Therefore, the final part is obtained in a whole and single process increasing the efficiency and erasing loss of time.
Automatic line CNC controlled for punching, marking and shearing profiles. This solution is ideal for metallic constructors. The bars (flat bars up to 500x400 mm, and angles up to 150x150x15 mm) up to 12 m long are pushed and clamped by a carriage. Material is always guided by lateral roller against line reference.
|
|
MAG B : Drilling punching marking and plasma cutting machine for plates
MAG B range: MAG B 320-80, MAG B 320, MAG B 620, MAG B 1225
Efficient, easy to run and flexible machines for plates
Compact line for complete machining (drilling, punching, marking and plasma cutting) of middle and high thick plates in one handling
The purely software-based solution is a new approach in which a processor carries out all automation tasks within a single-processor mode. The PC software is used for processing PLC and NC tasks.
|
|
Dual Guard(TM), Heavy Duty Cutting, Welding, and Heating Outfits
Dual Guard(TM), Heavy Duty Cutting, Welding, and Heating Toolbox Outfits
Dual Guard(TM), Heavy Duty Hand Cutting Torch Outfits
Dual Guard(TM), Medium Duty
Tough Cut(TM), Medium Duty
Tag-A-Long(TM), Portable
Versa-Torch®, HVAC/R
Quickbraze®, HVAC/R
Versa-Torch® Standard Tip Selections
Versa-Torch®/Quickbraze® Tip Selections
Handi-Heet®, Soldering & Brazing
Silver Smith(TM), Soldering & Brazing
The Little Torch®, Jewelry/Hobby
The Little Torch®, Jewelry/Hobby Caddy Kits
The Little Torch®, Jewelry/Hobby Tips and Technical Information
|
|
Design:
- Hand torches for flame cutting up to 500 mm
- Hand torches for flame gouging
- Special versions for scrap cutting
- Different sizes and different length
- Available with DIN, BS and CGA connections
- For all fuel gases
Advantages:
- Valve-forward design ensures maximum operator safety
- New valve design guarantees higher gas flow rates and enhanced cutting capacity
- Heavy-duty head avoids overheating
- New monoblock valves improve operator control and allow precise adjusting also with gloves
- Triangular arrangement of stainless steel tubes provides high durability and maximum stability
- Modular design (also with STARLET and STAR torch systems) reduces maintenance cost and downtime
Product Range:
- Hand torches for flame cutting
- Hand torches for flame gouging
- Scrap cutting torches
- Accessories, wearing parts
|
|
|
|
|
|
-Combined Welding- and Cutting Torches
hand grip for normal hoses
welding attachment in 9 sizes from 0,2 to 25mm welding range
tubular welding attachment in 4 sizes from 1 to 9mm welding range
more-flame-attachment in 4 sizes from 4,0 to 19mm heating range
cutting attachment with concentric nozzles and wing or lever operation for
cutting oxygen valve and cutting ranges from 3 to 300mm
a hole cutting torch from 3 to 50mm cutting range
and sets (assortments) of different compositions in a steel storage case.
-Soldering torches – air inlet by torch insert
The programme contains different hand grips, welding torches, welding heads with extension tubes and different compositions - sets – as well as soldering irons.
Sets are assortments of various hand grips and inserts for different applications like soldering, brazing etc.
-Propane - Oxygen
Set for heating
Heating torches
Cutting torches
Cutting torches with concentric nozzles
-Propane/Accessories
Pressure regulators for propane
Small-Propane-gas bottles
Double hose
Distributors
Pressure propane hoses
Detachable hose tails
-Pressure Regulators for bottled gases DIN EN ISO 2503
Single-stage pressure regulators
Two-stage pressure regulators
Pressure regulators with volume meter Single- and two-stage
|
|
The Koike Aronson IK series features a high speed tracing system that is capable of following a pattern at speeds of up 120 IPM. The IK series of machines support oxy/fuel and plasma cutting processes; the maximum tool load on the machine is two tools.
The IK series of machines utilize the HL-83A coordinate drive tracing system with speed ranges from 4 to 160 IPM. Options available on this machine include CNC controls, plasma systems, and cutting tables.
MACHINE FEATURES
Available cutting widths: 4', 5' and 8'
Available cutting lengths 10 and 20 feet
Versatile cutting for large and small applications
|
|
UNIQUE GLOBAL SUPPLIER !
With the AXXAIR global concept you may upgrade the tube cutting machines from:
· simple orbital cutting
· to automatic orbital cutting
· to automatic orbital cutting and welding for prefab applications: CC+SASL
· to traditional orbital welding with closed heads: SASL+SATF
IN A FEW MINUTES ONLY !
|
|
|
The Modular Drive System from Bug-O Systems can provide continuous welding at precise travel speeds, producing flawless welds in a fraction of the time required by hand welding. Various types of rail allow the system to be used on all types of work. Alternative Control Modules allow the system to perform continuous stringer welding, weave welding, stripping, beveling and programmable shape cutting.
|
|
|
|
|
|
The KatII incorporates everything required to automate your
cutting/ welding operations...quickly, easily, economically. It is
comprised of the Kat II travel carriage and rigid 8 ft. (2438mm)
straight track and torch or gun holder assembly. The carriage
travels in a forward or reverse direction (vertical or horizontal) on
its track, moving the torch or welding gun along the pre-set path
at precisely controlled speeds. The accuracy, uniformity and
quality of the cut or weld is improved. Productivity is increased.
Costs reduced. It is important to note that the Kat II carriage is
not designed to travel on radius roll formed track.
AND...YOU CAN EASILY CONVERT YOUR KAT II
INTO AN EXCELLENT CIRCLE CUTTING MACHINE
This Gullco accessory, comprised of undercarriage, radius
arm and centering pin, eliminates the need for track. The
travel carriage is readily fitted on the top of the undercarriage.
Its drive system engages the undercarriage gears
...moving the assembly in a forward or reverse direction
at desired cutting speeds along a perfectly circular path. A
slide lock on the radius arm allows fast, easy adjustment of
II the circular diameter.
|
|
PT-1052-1 - 6" Diagonal Cutting Pliers
PT-1057-1 - 7" Diagonal Cutting Pliers
PT-1060-1 - 7" Large Diagonal Cutting Pliers
PT-1105 - 5" Curved Jaw Locking Pliers
PT-1150 - 5-1/2" Midget Diagonal Cutting Pliers
|
|
Side cutting pliers, 2101D
Side cutting plier with progressive edges designed to cut hard material such as piano wire close to the joint and to cut softer material as copper wire and plastic insulated wire at the tip.
ISO: 5749 DIN: 5749
Finish: Black oxidised, anti-corrosion treated.
Material: Chrome-Vanadium steel. PVC coated handles without return spring.
Shape: An "open" joint, in which the distance from the joint centre to the cutting edges is reduced, results in greater leverage and increased cutting capacity. Progressive cutting edge which cuts hard material near the joint and soft materials at the tip. Round shaped jaws give improved accessibility in confined spaces.
Cutting capacity: Piano wire.
IP = Industrial Pack
|
|
Better cutting - manual cutting systems
the ergonomically formed cutting carriage with cutter cassette cuts with absolute safety in both directions.
The cutter cassette can be replaced in one easy operation.
cassette with circular knife for paper, corrugated board etc.
cassette with blade for film
for use with roll material, such as paper, corrugated board or foil, we offer you the time-tested cutting systems with dispenser
freestanding or directly at the packing location
with changeable cutting cassette
standard cutting widths up to 160 cm, vertical cutting stand up to 200 cm
|
|
Manual ultrasonic cutting or welding
Depending of the sonotrode, this very compact and flexible unit, allows to make cutting or welding oprerations.
|
|
Cutting & Welding
3 Table Set-up:
10' Main Vacuum Table
8' (2.44m) Usable Welding Length
10' Filler Table
6x8' Cutting Table
|
|
| ... products without technical information |
| |
The development of robotics has led MATRASUR Composites to widen its equipment offer, manual and automatic by integrating an internal Robotic Service in the company, completely dedicated to the design of robotic solutions.
The Usimat robot line integrates robotised machining and trimming operations of finished parts into the production process. This type of robot is capable, according to its configuration, to detect the position of a part in space before trimming. There is a large diversity of tools (drill, mill, reamer, disc, etc.) to adapt to numerous applications in the machining and trimming fields.
|
|
Motoman’s HP20 robot provides a powerful solution to meet your automation needs
CUTTING • DISPENSING • HANDLING
MACHINE TENDING • PACKAGING • MATERIAL REMOVAL
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
