|
|
Satellite Paste Applicators are designed to complement an existing heat source, such as furnace or induction. These freestanding units apply single, multiple, or "ring shape" paste deposits onto assemblies. Cycling is automatic and error-free with an operator removing the pasted part and loading it into the adjoining heat source.
Applicator guns can also be mounted to a robot to apply a detailed combination of paste dots and stripes to a particular part. After the pasting cycle, the part is joined to its companion members and fixtured to the subsequent heating and cooling sequence.
Dual station system utilizes rotating mandrel technique to apply 360° stripe of Fusion Paste onto part joint area.
|
|
SPECIAL
This product line gathers all automated or semi-automated systems, designed and built for complete or partial applications, on specific request for custom equipment, syandalone or integrated.
|
|
ECO
Micro-jet dosing systems for:
- lubro-cooling substances for processes like shearing, drawing, drilling, tapping, cutting, etc.
- lubrication of particular kinematic mechanisms and/or components
Products: lubricating oils, evaporable oils, cooling liquids, detaching fluids, protective coatings, etc
|
|
Pistol-Grip Attachment allows paste to be applied manually to copper and brass assembly
Compressed air from control panel is introduced to upper gun body, forcing circular piston and attached piston rod upward against coil spring. Pressurized paste alloy (from reservoir) fills vacant space between piston rod tip and nozzle orifice.
As timer de-energizes, compressed air is exhausted, and coil spring returns piston and rod to closed position. Piston rod tip displaces paste alloy through nozzle orifice and seals opening until next cycle. Precise deposit size is obtained by adjusting control panel timer, paste pressure, and length of piston rod stroke.
|
|
| ... products without technical information |
| |
The MicroCoat is a different type of stock lubrication system that lets metal stampers apply the perfect amount of oil for each job.
Contact lubrication systems like pads and rollers can be difficult to regulate, are easily contaminated, and often require significant maintenance.
In contrast, the MicroCoat is a non-contact system that applies oil as a fine, consistent film that provides complete coverage using much less oil.
|
|
| ... products without technical information |
| |
|
This system enables to feed in a fully automatic way strip brazing material between two metallic pieces to be assembled. Method widely used in the joining of copper parts. Self-running device : supplied as a kit, with its own PLC, it can be mounted on every existing spot welding machine. More than a feeder of brazing strip, this system also gives you additional quality controls : control of the brazing presence before welding and control of the melting of the strip.
|
|
EDS - ECO Dosage Solution - is designed to provide a modern and highly efficient means of mixing water and detergents in cleaning applications. In tests performed, Nilfisk-Advance has been able to prove that EDS – ECO Dosage Solution – offers significant cost and time savings, as well as more reliable cleaning results. Since the precise dosage of detergent will always be applied, human error in mixing is completely eliminated.
Furthermore, on scrubber/dryers fitted with EDS – ECO Dosage Solution – the detergent is added to the water at the scrub deck – not in the tank. This means that only clean water is ever in the tank, making it unnecessary for it to be emptied or cleaned. This feature significantly reduces downtime and increases productivity.
On ECO Solution mode, Nilfisk’s scrubber/dryers reduce water consumption by as much as 50%. Nilfisk’s BR 601 model, for example, only uses 1 litre of water for cleaning as much as 56 m².
|
|
|
Label Tray for high capacity rolls
|
|
The dispensing table-top robot TR300 designed and produced by mta automation ag is controlled by an industrial PC allowing the automation of dispensing operations for liquid or viscous products. The increasing demands of customers in term of quality, precision and repeatability lead to increasing levels of automation. However, when production batches are small or products widely dissimilar, the cost of sophisticated equipment can place automation beyond the reach of many would-be users. In order to satisfy this need, mta developed a table-top robot which combines flexibility with required high levels of process quality and repeatability, all at a reasonable cost.
The 3 or 4 axes can be fully programmed, as are the dispensing parameters for each dispensed point.
|
|
SMALL FOOTPRINT, ENDLESS POSSIBILITIES…
Xiril 100 - The compact and flexible liquid handling robotic workstation with a full range of accessories to perfectly serve applications within the Life Science and Diagnostic markets. A step up from the 75cm platform, our popular Xiril 100 with up to four pipettes and 20 microplate positions perfectly serves low to medium throughput needs.
|
|
Model I&J7300 bench robot is our most popular industrial robot with a dispensing area of 11.81" x 11.81" (300mm x 300mm). The I&J7300 Cartesian robot represents a substantial cost saving in comparison to similar desktop robots. Its overall footprint has a depth of less than 26 inches (640mm), suitable for an industrial bench.
Features
• Dispensing area of 11.81" x 11.81" (300mm x 300mm)
• Repeatability 0.01mm for perfect dispensing
• No computer skills required
• 100 programs, 4000 points per program
• Available in three and four axis models.
• Continuous path motion for perfect XYZ dispensing
• Interpolates lines or arcs for three-dimensional dispensing
• Teach Pendant and PC programming.
|
|
Model I&J7400 is the largest dispensing robot in the current desktop robot series with a working area 15.75" x 15.75" (400mm x 400mm) but with a footprint depth of less than 30 inches (760mm) for mounting on an industrial work bench. Particular attention has been given to frame accuracy in an industrial robot of this size, and the base is a heavy-duty cast construction to maintain linear performance across the entire dispensing area.
Features
• Dispensing area of 5.75" x 15.75" (400mm x 400mm)
• Repeatability 0.01mm for perfect dispensing
• No computer skills required
• 100 programs, 4000 points per program
• Continuous path motion for perfect XYZ dispensing
• Available in three and four axis models.
• Interpolates lines or arcs for three-dimensional dispensing
• Teach Pendant and PC programming.
|
|
|
|
|
|
The I&J9332 (R) industrial robot has a working and automatic dispensing area of 11.81 x 11.81 (300 x 300mm) and can be operated in cantilever mode. The height of the assembly robot is adjusted by mounting supports that are available in standard heights. The in-line Cartesian robot operates above the dispensing application and is therefore is suited as an assembly robot for conveyors and work cells. The dispensing robot is available in 3 and 4 axes models.
Features:
• Working Area of 11.81 x 11.81 (300 x 300mm)
• Cartesian-Gantry construction with axis motion above the subject.
• Designed for Assembly Line and Rotary Operations
• Digital Servo controlled ball screw drives.
• Multiple I/O ports for machinery and conveyor integration.
• Allows customized heating and secondary rotation of parts.
• Available in three and four axis models.
• High speed movement up to 1000mm/sec.
• Continuous path motion for perfect XYZ dispensing
• Interpolates lines or arcs for three-dimensional dispensing
• Teach Pendant and PC programming.
• Ideal for Meter Mixing and Hot Melt machine integration.
|
|
Ultra® TT dispensing robots are a cost-effective way to increase throughput and quality by automating repetitive fluid dispensing processes.
These compact tabletop units can be used with all EFD valves and syringe barrels, and combine precise positioning and dispensing functions in a space-saving footprint.
The Ultra TT robots are available with 325mm x 325mm or 525mm x 525mm work envelopes. Closed-loop servo controls provide fast, accurate positioning of the dispense tip, while the integrated time and pressure controls control the operation of the valve or syringe barrel.
|
|
| ... products without technical information |
| |
STANDARD dispensers - the approved quality
thousandfold approved, sturdy, durable
with smooth tear bar for paper or serrated bar for paper and foil
practical one-handed service
for rolls 30-100 cm wide and up to 22 cm diameter, max. 20 kg
sturdy powder coated profile steel frame either light grey (RAL 7035) or elegant chromium plated
the spring-loaded tear bar is also an effective roller brake
versatile combinations with curling ribbon dispensers for 1-12 reels possible
|
|
|
Dispensers EL-5 are capable of rolling humidified paper ready to close carton boxes. Possibility to select the tape sequence as required pushing buttons. Heating for moistening water electronically regulated. The paper rolls can be rolled with the glue coating on the inside or the outside. No noise level when in stand-by: the motor is only started when the program button is pressed.
|
|
E - Friction Feeder :
Compact and robust construction.
Standard magazine with shaking magnet.
Stack level control in the magazine.
Single dispensing and counting.
Speed: approx. 125 m/min.
Product width: up to 250 mm
Product length: min. 40 mm
Product height: max. 14 mm
|
|
| ... products without technical information |
| |
The SUPPLY POINT tool vendor is made out of an automatic cupboard and of a tool Management software.
After having identified the operator and his rights, the cupboard automatically distributes the EXACT QUANTITY of required tools.
The software saves all carried out operations.
This automatic tool vendor is very simple to use and offers following benefits :
- Tools are available 24 hours a day and 7 days a week
- Tools inputs and outputs can be traced
- Stock control
- Reduced inventories
- Control of supplies...
According to the cases, this tool vendor can help save up to 30 % of tool consumption.
|
|
| ... products without technical information |
| |
CribMaster ToolCube
Open the drawer and you access to only the tools you have selected using our configurable drawer divider system. High Security in a drawer system helps you by:
Dispensing costly expendables like carbide cutting tools without dropping or repackaging
Allowing flexible drawer configurations with 9 unique drawer sizes
Allowing issue and returns to the same device
Ensuring all re-ground or reworked tooling is issued prior to new
Tracking with multi-category usage & accounting %u2013 Up to seven (6 user definable) classifications for tracking and reporting
Allowing flexible automatic reordering & resupply to limit stock outs
Item issue efficiency %u2013 improved productivity by issuing nearer to job sites
Helping manufacturing efficiency %u2013 machine usage improved by minimizing downtimes
Eliminating stock-outs with features like critical alerts and automated optimum order levels
|
|
The MICRO-FLOW Sensor is a flow detecting device, used within a semi or fully automated metering process, to detect whether material has been dispensed.
The MICRO-FLOW Sensor does not control the metering volume. It is used particularly when handling unfilled grease with NLGI class 1 to 3, high viscosity oils or silicone-oils.
The MICRO-FLOW Sensor can be adapted to the DOPAG Micro and Mini metering valve as well as to the 417 range of the metering valves.
|
|
VERTICAL RACK FOR COILS AND REELS MAX DIA.700 MM DIAM. ART. SU.
(Special version up to dia.1000mm).
|
|
|
|
see the results for the following category : 
