|
|
(2-Panel CO2 Laser)
World Champion of 2-Panel CO2 Laser
Drilling Machine manufacturers
To the world of High quality Cu direct drilling
|
|
(CO2 Laser)
World Champion of 2-Panel CO2 Laser
Drilling Machine manufacturers
To the world of High quality Cu direct drilling
|
|
IPTE 's depaneling systems offer a unique combination of cutting tools, material handling and tooling to cut high technology panelized printed circuit board assemblies. They can be utilized in all kinds of production environments and can be seamlessly integrated, for example, in in-line manufacturing environments with automated ingoing and outgoing feeder units, and also be used in stand-alone configuration for manually supplied loading and unloading of boards.
|
|
|
As a leading company in the PWB manufacturing systems industry, Hitachi Via Mechanics has been providing a broad range of products including PWB Mechanical Drilling Machines, Routing Machines and Laser Drilling Machines
|
|
Fine and High speed drilling (equipped) with 1/8 inch shank and 160,000~300,000 min-1 spindles
As a leading company in the PWB manufacturing systems industry, Hitachi Via Mechanics has been providing a broad range of products including PWB Mechanical Drilling Machines, Routing Machines and Laser Drilling Machines. We have also commercially introduced other products including Hole Analyzer and Printed-circuit Motherboard Products. Furthermore, we have been providing PWB manufacturing facilities, which are ready to address the needs of the highly-advanced information age. These solutions have an excellent reputation and have earned a high level of customer confidence.
|
|
Fine and High speed drilling (equipped) with 1/8 inch shank and 160,000~300,000 min-1 spindles
High Performance and Best Seller Ne Series equipped with full range spindles of 125,000~200,000 min-1 to meet various proces
|
|
| ... products without technical information |
| |
Laser & Beam Delivery
Cutting Trimming Scribing Ablation Drilling Welding
Non-contact process
Sub-micron machining
No tool wear or breakage
Faster than conventional micro-machining
Accurate and repeatable process control
Low operation cost
Quick set-up and change over
Minimized material loss
|
|
Machining center, automatizable, 4 axes for LASER drilling with diameters from 0,025 mm dof small mechanic parts, such as cylinder filters. The process uses pulsed Nd YAG sources direct or fiber delivered.
The dynamics and precision, entrusted to screw axes in the basic version, can be elevated to the state of the art in the aero version, with linear motors and granite structure.
The high technical content, the ease of use and its specificity make of it an excellent means in the refined processes with LASER technology.
|
|
EWS 200 – European Work Station
Characteristics
The laser working station EWS 200 offers a large range of application with a space requirement of only 120x80 cm. Fiber optics beam delivery to processing head or scanner.
Application
EWS 200 is specially designed for precision seam and spot welding for medical, electronics, automotive and micro machining industries as well as for cutting and drilling applications with fiber optics.
Specifications
* Feed range X-axis 400mm
* Feed range Y- axis 400mm
* Feed range Z- axis 200mm
* optional rotary table
* Positioning accuracy +/- 30µm (circular axis 0.04 degree)
* GE Fanuc 210i-MB controller, AC motors
* Programming with G&M-functions
* Polymer composite base
* Integrated laser control software PCT2
* EWS 200 can be used in combination with any LASAG laser
* High industrial safety – cabin laser class 1
* Beam focussing with LASAG processing head or scanner
* Power requirement 230V, 7kVA
|
|
The Preco ST2000, ST2200(pictured) and ST2400 Series Laser Workstations perform multi-axis laser welding, drilling and cutting in a Class I or Class IV enclosure. ST Series Workstations are time and field proven machines designed around fixed beam laser technology and Preco XY motion and control technology.
The rigid Preco design offers a smooth cutting path with high accuracy over the full range of motion and has high overall system reliability with a simple optical path and user friendly PC controls.
|
|
Ghibli: Flexibility becomes efficiency
OT-LAS has perfected Ghibli, a highly flexible machine suitable for all types of decorating and custom-designing of small objects. A leader among the machines of its generation, Ghibli offers all the advantages for immediately satisfying creative and productive requirements in their most advanced and modern forms.
With its technical features and high performance, Ghibli is a powerful instrument and a winning solution. Fully designed and manufactured on site by the Group, the system combines efficiency and reliability, ensuring rapid and safe assistance.
|
|
| ... products without technical information |
| |
Laser & Beam Delivery
Cutting Trimming Scribing Ablation Drilling Welding
Non-contact process
Sub-micron machining
No tool wear or breakage
Faster than conventional micro-machining
Accurate and repeatable process control
Low operation cost
Quick set-up and change over
Minimized material loss
|
|
Machining center, automatizable, 4 axes for LASER drilling with diameters from 0,025 mm dof small mechanic parts, such as cylinder filters. The process uses pulsed Nd YAG sources direct or fiber delivered.
The dynamics and precision, entrusted to screw axes in the basic version, can be elevated to the state of the art in the aero version, with linear motors and granite structure.
The high technical content, the ease of use and its specificity make of it an excellent means in the refined processes with LASER technology.
|
|
EWS 200 – European Work Station
Characteristics
The laser working station EWS 200 offers a large range of application with a space requirement of only 120x80 cm. Fiber optics beam delivery to processing head or scanner.
Application
EWS 200 is specially designed for precision seam and spot welding for medical, electronics, automotive and micro machining industries as well as for cutting and drilling applications with fiber optics.
Specifications
* Feed range X-axis 400mm
* Feed range Y- axis 400mm
* Feed range Z- axis 200mm
* optional rotary table
* Positioning accuracy +/- 30µm (circular axis 0.04 degree)
* GE Fanuc 210i-MB controller, AC motors
* Programming with G&M-functions
* Polymer composite base
* Integrated laser control software PCT2
* EWS 200 can be used in combination with any LASAG laser
* High industrial safety – cabin laser class 1
* Beam focussing with LASAG processing head or scanner
* Power requirement 230V, 7kVA
|
|
The Preco ST2000, ST2200(pictured) and ST2400 Series Laser Workstations perform multi-axis laser welding, drilling and cutting in a Class I or Class IV enclosure. ST Series Workstations are time and field proven machines designed around fixed beam laser technology and Preco XY motion and control technology.
The rigid Preco design offers a smooth cutting path with high accuracy over the full range of motion and has high overall system reliability with a simple optical path and user friendly PC controls.
|
|
Ghibli: Flexibility becomes efficiency
OT-LAS has perfected Ghibli, a highly flexible machine suitable for all types of decorating and custom-designing of small objects. A leader among the machines of its generation, Ghibli offers all the advantages for immediately satisfying creative and productive requirements in their most advanced and modern forms.
With its technical features and high performance, Ghibli is a powerful instrument and a winning solution. Fully designed and manufactured on site by the Group, the system combines efficiency and reliability, ensuring rapid and safe assistance.
|
|
| ... products without technical information |
| |
|
|
|
|
COMPLETE PLATE PROCESSING MACHINE HIGH SPEED DRILLING AND MILLING
The Fabricator XRP is a complete plate processing system combining the very best cutting, marking, drilling and milling technologies. The sub-axes drilling capability provides the drillhead with a range of movement independent of the main machine X & Y axes, creating a 250mmx250mm clamped work envelope for continuous, uninterrupted machining. The XRP is currently operational in Australia and the U.S.A. producing complex parts, straight off the table, in one set-up.
TECHNICAL DATA
Profiling speed: to 20m/min
Max spindle speed: 6000rpm
Rapid traverse: to 50m/min
Spindle torque: 210.1Nm @ 1000rpm
Max drilling power: 27kW (36hp) @ 60% duty, 30kW (40hp) for 30 min
Accuracy: ± 0.15mm
Maximum drill: 65mm
Repeatability: ± 0.1mm
Max tool diameter: 75mm all pockets full, 130mm alternate pocket empty
Cutting widths: 2m to 5m
Cutting length: 3m to 50m
Max clamping thrust: 12000N
Material thickness: 6mm – 140mm
Spindle taper: BT40
Max drilling power: 27kW (36hp) @ 60% duty cycle
Coolant system: High pressure through spindle, external coolant & plate wash
Milling capacity: up to 350mmØ while clamped
Drive system: Twin side drive Helical rack & twin pinion, backlash free gear box
Components: Hypertherm HyDefinition plasma up to 400 amp, 5-axis bevel head, oxy-fuel systems, marking systems, BT40 spindle taper with 40 tool changer, raise/lower water table and touch screen controller. All Siemens servos and drives.
|
|
|
The TIPO B machines are designed to comply with the different requirements when automatically processing in one cycle large plates and medium/high thicknesses, ensuring high quality, precision, productivity and flexibility. These lines are flexible CNC centers capable of complying with the requirements of both traditional steel fabricators and all types of industry requiring flat components in steel for their particular needs. Besides punching and plasma cutting units, daisy wheel marking unit, drilling/milling head, automatic tool changer , oxy-cutting unit and automatic unloading devices are also available. The plate positioning is granted by two carriages with pincher assuring high precision even when heavy plates are processed.
|
|
MAP Automatic marking, punching, shearing line for metal profiles - flat bars - angle sections - I - U - H- UPAF, etc.
MAP range: MAP 160 MAP 300 MAP 450
Universal, powerful and high-speed machines
MAP 160, 300 and 450 machines are flexible marking, punching, shearing systems for metal profiles, etc., designed to switch easily from angle sections to flat bars, or to I - U - H profiles.
The modular design makes it possible to adjust equipment capacities to user requirements at the lowest cost.
Access to tools, punches and dies, is easy and makes it possible to switch production quickly.
The MAP series punching-shearing lines are the only machines on the market performing in a single pass all operations normally carried out on beams:
- easy programming
- fast and precise
- flange and web punching in a single pass
- easy and quick machine adjustment.
These machines are especially suited to steel structure construction.
|
|
|
|
|
|
The automatic plate systems are suitable to process heavy steel plates with a thickness up to 40 mm.
The CNC controlled plate processing machines are able to punch, drill, tap, centre point, deburr and mark heavy steel plates automatically.
V250 Plate punching system
The V250 plate punching system is consists of a hydraulic triple punching machine and a X-Y table with hydraulic material clamping. A drilling unit, an automatic tool changer, a numbering unit and a deburring unit can be added to the machine as an additional extra. With the drilling unit, steel plates can be provided with holes, which cannot be punched, due to the material thickness restrictions.
V200 Plate drilling system
The V200 plate drilling system consists of a CNC-controlled vertical drilling unit and a X-Y table. With the V200, steel plates, pre-cut to a certain dimension, are automatically provided with holes and screw taps. The X-Y table has a double hydraulic material clamping system. Automatic tool changer, a numbering unit and a deburring unit can be added to the machine as an additional extra. With the deburring unit the drilled holes will be deburred automatically from the underside.
|
|
|
|
|
|
COMPLETE PLATE PROCESSING MACHINE HIGH SPEED DRILLING AND MILLING
The Fabricator XRP is a complete plate processing system combining the very best cutting, marking, drilling and milling technologies. The sub-axes drilling capability provides the drillhead with a range of movement independent of the main machine X & Y axes, creating a 250mmx250mm clamped work envelope for continuous, uninterrupted machining. The XRP is currently operational in Australia and the U.S.A. producing complex parts, straight off the table, in one set-up.
TECHNICAL DATA
Profiling speed: to 20m/min
Max spindle speed: 6000rpm
Rapid traverse: to 50m/min
Spindle torque: 210.1Nm @ 1000rpm
Max drilling power: 27kW (36hp) @ 60% duty, 30kW (40hp) for 30 min
Accuracy: ± 0.15mm
Maximum drill: 65mm
Repeatability: ± 0.1mm
Max tool diameter: 75mm all pockets full, 130mm alternate pocket empty
Cutting widths: 2m to 5m
Cutting length: 3m to 50m
Max clamping thrust: 12000N
Material thickness: 6mm – 140mm
Spindle taper: BT40
Max drilling power: 27kW (36hp) @ 60% duty cycle
Coolant system: High pressure through spindle, external coolant & plate wash
Milling capacity: up to 350mmØ while clamped
Drive system: Twin side drive Helical rack & twin pinion, backlash free gear box
Components: Hypertherm HyDefinition plasma up to 400 amp, 5-axis bevel head, oxy-fuel systems, marking systems, BT40 spindle taper with 40 tool changer, raise/lower water table and touch screen controller. All Siemens servos and drives.
|
|
|
The TIPO B machines are designed to comply with the different requirements when automatically processing in one cycle large plates and medium/high thicknesses, ensuring high quality, precision, productivity and flexibility. These lines are flexible CNC centers capable of complying with the requirements of both traditional steel fabricators and all types of industry requiring flat components in steel for their particular needs. Besides punching and plasma cutting units, daisy wheel marking unit, drilling/milling head, automatic tool changer , oxy-cutting unit and automatic unloading devices are also available. The plate positioning is granted by two carriages with pincher assuring high precision even when heavy plates are processed.
|
|
|
|
|
|
COMPLETE PLATE PROCESSING MACHINE HIGH SPEED DRILLING AND MILLING
The Fabricator XRP is a complete plate processing system combining the very best cutting, marking, drilling and milling technologies. The sub-axes drilling capability provides the drillhead with a range of movement independent of the main machine X & Y axes, creating a 250mmx250mm clamped work envelope for continuous, uninterrupted machining. The XRP is currently operational in Australia and the U.S.A. producing complex parts, straight off the table, in one set-up.
TECHNICAL DATA
Profiling speed: to 20m/min
Max spindle speed: 6000rpm
Rapid traverse: to 50m/min
Spindle torque: 210.1Nm @ 1000rpm
Max drilling power: 27kW (36hp) @ 60% duty, 30kW (40hp) for 30 min
Accuracy: ± 0.15mm
Maximum drill: 65mm
Repeatability: ± 0.1mm
Max tool diameter: 75mm all pockets full, 130mm alternate pocket empty
Cutting widths: 2m to 5m
Cutting length: 3m to 50m
Max clamping thrust: 12000N
Material thickness: 6mm – 140mm
Spindle taper: BT40
Max drilling power: 27kW (36hp) @ 60% duty cycle
Coolant system: High pressure through spindle, external coolant & plate wash
Milling capacity: up to 350mmØ while clamped
Drive system: Twin side drive Helical rack & twin pinion, backlash free gear box
Components: Hypertherm HyDefinition plasma up to 400 amp, 5-axis bevel head, oxy-fuel systems, marking systems, BT40 spindle taper with 40 tool changer, raise/lower water table and touch screen controller. All Siemens servos and drives.
|
|
|
The TIPO B machines are designed to comply with the different requirements when automatically processing in one cycle large plates and medium/high thicknesses, ensuring high quality, precision, productivity and flexibility. These lines are flexible CNC centers capable of complying with the requirements of both traditional steel fabricators and all types of industry requiring flat components in steel for their particular needs. Besides punching and plasma cutting units, daisy wheel marking unit, drilling/milling head, automatic tool changer , oxy-cutting unit and automatic unloading devices are also available. The plate positioning is granted by two carriages with pincher assuring high precision even when heavy plates are processed.
|
|
|
|
see the results for the following category : 
