|
|
In spite of all accuracy in the production process the repair / reworking of electronic PCBs belongs to the daily business. Relating to the components and used circuit boards (double-sided, Multilayer etc.) there are different requests imaginable. Also the quantity, in other words the complete quantity of repairs plays a decisive role. Beside the processes Dispensing, Placing and Soldering the process Removing und Cleaning of components is certainly added. Our µPlacer is a complex rework system, which considers all these elements with high precision.
|
|
| The pcba|inspector is a high-resolution microfocus X-ray inspection system designed for inspecting solder joints in board assemblies. |
|
Special features:
Max. inspection area 24“ x 20“
Detail detectability of <2µ
Max. tube voltage of 100kV
Automated calculation of offset and annular ring width
Multiple-axis manipulation
Maintenance-free X-ray tube
Integrated noise suppression system
User-friendly image processing software
Easy and intuitive operation |
|
Detecting manufacturing defects such as positional, missing, skewed, misplaced, incorrect device, incorrect polarity, solder and lead defects is fast and reliable. Unique dual lighting delivers the capability of inspecting laser marking on IC’s and SOT devices. An additional benefit is that it also delivers enhanced inspection of 0603 and 0402 devices.
Developed by DiagnoSYS for operator ease of use, this true AOI software is the most advanced available. Each system utilises the same software for extended ease of use. Comparator software, included, is a perfect solution for inspecting low volume assemblies without the need for programming.
Full manufacturing integration
The ScanPoint DT addresses prototype through to medium volume requirements complementing the ScanPoint 50 in-line system which targets medium to high volume. The family is complete with off-line programming allowing programs to be generated without interfering with production. Programs can be shared across multiple DiagnoSYS AOI systems. Data logging of test results is complimented with a full rework station capability |
|
| ... products without technical information |
| |
Application:
Thanks to his maximum acoustic performance (alphaw = 1), Atrium® reduces the sound level by decreasing the time of reverberation.
Description:
Atrium® is a suspended ceiling panel lined with a decorative
glass fibre tissue on the visible side and a natural glass fibre
tissue on the reverse side. Benefiting from the last technological headways of the stone wool, the Atrium® presents a maximal acoustic performance (alphaw = 1), a strengthened mechanical holding and a perfect perpetuity in the time.
Execution:
Atrium panels are installed on an easy to dismantle T15 or
T24 mm framework. They should be installed in accordance
with the stipulations of the NFP 68203-1 & 2. We recommend
providing air circulation between the room and the plenum in
order to balance out any temperature and pressure differences on either side of the ceiling. |
|
| pinta's ceiling tiles add texture, style, and color to any interior while solving a wide array of acoustical issues. |
|
pinta offers a variety of wall panels to meet all your acoustic challenges.
|
|
Application
Acoustiroc® will provide excellent acoustic control in many environments including : industrial premises, schools, interview rooms, sports halls, recording studios and canteens. The system provides solutions to acoustic control problems in all areas where the walls are to be used in providing acoustic correction but also need to resist mechanical damage.
Presentation
Acoustiroc® is a stone wool panel with a perforated metal face. The face is coated in epoxy paint, either white, or in a wide range of colours and is backed with a black glass fibre tissue. The panel provides a thermo-acoustic wall lining, both decorative and impact resistant. The reverse of the panel is lined with natural glass fibre tissue for ease of installation and the complete system has excellent long-term durability.
Execution
The Acoustiroc® panel system is very easily and quickly assembled using one all-purpose channel trim. The panels are also easily demounted if necessary. The base support strip allows the panels to be positioned by locating the top of the panel in the upper channel then sliding down to locate in the base channel.
The channel trim is also used to provide all lateral finishes and
horizontal joints. |
|
| ... products without technical information |
| |
From magnets to full assemblies, Angstrom Sciences offers complete repair and rebuilding services for obsolete cathode assemblies.
Our engineers can also retrofit your existing magnetrons with our high-strength rare earth magnets, our patented magnetic profiling, our turbulent-water-flow cooling - or all three advanced components.
The results will substantially increase your system's power, uniformity, target utilization, and the overall efficiency of your sputtering operation.
In business today, it’s more important than ever to maximize operating efficiency and minimize production costs. That’s why Angstrom Sciences has developed a retrofit method to improve any existing magnetron assembly’s performance with:
Increased target utilization
Increased rate
Maintained or increased film uniformity
Reduced downtime
Reduced cost per substrate
Angstrom Sciences’ high-performance magnet retrofits are guaranteed to increase efficiency and performance in any existing system.
|
|
| Magma can build segmented Multi-Pole Stator Rings for electric motors. This can save costly hand-work especially where customers do not mass produce and cannot install automation or jigs to aid assembly. |
|
| ... products without technical information |
| |
... see all the products in the category
Magnets
|
| Toshiba is one of the top photocoupler suppliers in the world. We have the broadest product line-up with various output types such as Transistor, Triac, Thyristor, MOSFET (a.k.a. photorelays) and ICs, to meet different applications and customer's requirements. Toshiba introduced the LEDIP package, which has been popular in the industry. Also, the well-known white mold technology introduced by Toshiba achieves a high level of optical coupling efficiency. Toshiba is working on developing a variety of packages, functions and efficient production processes to offer the best line-up in the industry. One of the latest packages pioneered by Toshiba is Shrink Dual Inline Package (SDIP). Furthermore, Toshiba has been introducing many new products into the line-up of IC couplers, expanding the product portfolio of high-speed signal driver couplers and highly integrated power device driver couplers. |
|
The coupler is a component of each connector system.
All OSI components are exclusively equipped with qualified brand couplers. This ensures a optimum combination with the used connector types and guaranties the specified characteristics.
|
|
| ... products without technical information |
| |
Chip Baluns/Couplers
GSC Series [RoHS Compliant]
Compact high power capability.
For Base stations.
-Components published below are the examples of Balun & Cuppler.
-There are many other components available.
-Please contact us for availability and further details.
|
|
| ... products without technical information |
| |
TRANSLIGNE is the distributer on France of the chain conveyer with accumulation SPANGLED.
This conveyer is used in all the industrial sectors including that very demanding of the car.
There exists in 4 widths standards: 250mm, 350mm, 450mm and 600mm being able to transport loads up to 200 kg per pallet.
The objective of SPANGLED is always to find a solution with the customer requirement, even if should be carried out special components.
Its potential of manufacture enables him to hold of the very short delivery periods at very competitive prices.
You can consult the heading description to obtain detailed informations on our conveyer, its implementation or the various possibilities of configuration. |
|
Line of assembly or packaging following your schedule of conditions on the basis of:
- roller conveyers, with band, chain
- transfer to plates
- Manual, motorized or automated System
- Workstations to measure in aluminum profile
- Flow storage |
|
| ... products without technical information |
| |
|
|
see the results for the following category
