|
|
The measuring systems series MFE (metrology front end) is
particularly suited to manufacturers of structured wafers, masks,
MEMS and similar products. Because of the very high cleanliness,
process and yield requirements, all tools are especially designed
for use in cleanrooms.
MFE systems measure critical dimensions and overlays on the
one hand and 3D topography or film thickness on the other.
All tools are metrological and comply with the necessary industry
standards such as the SECS II / GEM software interface.
Furthermore, the system is fully automated and equipped
with wafer cassettes and part carriers.
An EFEM and mini-environment for class 1 cleanrooms
rounds off the upper segment of the MFE tool series. |
|
| The MetaPULSE® System uses patented picosecond ultrasonic laser sonar (PULSE™) technology to provide the industry's first production-worthy opaque film metrology tool. Its small-spot, non-contact, non-destructive technology enables on-product thickness measurements of single or multi-layer opaque films for aluminum and copper processes. In addition to thickness, the MetaPULSE identifies missing layers or interfacial problems such as poor adhesion, and characterizes material properties such as density and roughness. MetaPULSE is used by all of the top ten semiconductor manufacturers, and nearly 200 tools are currently providing production monitoring in fabs around the world. |
|
| High quality analogue instruments designed to measure an extensive range of electrical and electronic parameters. This comprehensive range offers DIN instruments, ANSI switchboard meters, panel indicators, sealed and ruggedised instruments, and complementary selector switches for line to line and line to neutral readings. Instruments are precision engineered and robust in design, ensuring accurate measurement and display in the most demanding of environments. All instruments are available in a range of styles, sizes and specifications to meet the exacting needs of industry. |
|
General Analogue Panel Meter-6 for control panel, generator,etc.
Detailed Spec.:
*SF-96-6 96X96mm AC Ammeter- Voltmeter, DC Ammeter- Voltmeter,Analogue Frequency meter,power factor meter,Watt meter,Var meter
*SF-72-6 72X72mm AC Ammeter- Voltmeter, DC Ammeter- Voltmeter,Analogue Frequency meter,power factor meter,Watt meter,Var meter
*SF-48-6 48X48mm AC Ammeter- Voltmeter, DC Ammeter- Voltmeter,Analogue Frequency meter,power factor meter,Watt meter,Var meter
|
|
This is the key tool for all professionals in HVAC and industry fields.
AMI 300 can measure, store up to 12,000 values and restore on PC (wireless communication) up to 6 parameters alternately.
Pressure, temperature (RTD, thermocouple, NTC), humidity, air quality (CO/CO2), air velocity and airflow (vanes or hotwire), tachometry.
For visual comfort, AMI has a large colored display and easy browsing is done thanks to its joystick on keypad.
Innovative and evolutive :
- AMI can be equipped with wireless probes (Radio frequency) supplied with a multifunctional key allowing measurement and settings.
- It can be equipped with interchangeable measurement modules which are individually calibrated and are automatically recognized by the instrument thanks to the Smart-plus system.
- These measurement modules are available for pressure, thermocouple temperature (4 channels), climatic conditions (hygrometry, air pressure and temperature) and current/voltage parameters.
- For instance, AMI can be equipped with several pressure measurement modules with different measuring ranges. This new system allows evolution according to measurements that must be carried out…
- Based on the same principle, all probes have the Smart-plus system and are therefore automatically recognized by the instrument. Probes are available with adjusting or calibration certificate.
* exept thermocouple probes
- A large choice of probes allows a step-by-step evolution of the instrument according to your needs : vanes Ø 14 mm, 70 mm and 100 mm, high resistance gooseneck–shaped hotwire, CO/.CO2, multifunction, high temperature hygrometry, RTD probes, thermocouple... |
|
Do you attach special value to the durability and performance of your vacuum instrumentation? We as developer and manufacturer of vacuum transducers, gauges, vacuum meters and controllers supply products which will exceed your expectations.
Thyracont Vacuum Instruments GmbH supplies vacuum measurement and control instruments for rough to ultrahigh vacuum.
All our products are “Made in Germany”
More information please find on our website http://www.thyracont.com
|
|
| The Brooks line of pressure instruments utilizes Brooks’ superior mass flow designs and applies them to process pressure. With a wide variety of control and configuration options, Brooks has the right pressure instrument for your application. Pressure controllers have options that accurately control upstream or downstream pressure. Remote transducers take an input from an external pressure device and adjust process flow. Available in 1-1/8” and 1-1/2” wide body models, and ultra high purity (UHP) and high purity metal sealed as well as elastomer sealed options. Available with analog and digital I/O. Globally approved for a variety of service areas. |
|
Products:
-Pressure gauges
-Pressure gauges in stainless steel
-Pressure and differential pressure switches
-Pressure and differential pressure transmitters
-Transmitters for the plastics industry
-Level Probes
-Pressure instruments in Ex Version
-Accessories, pressure separators, connection adapters
Measurement range:
Relative, absolute, barometric, differential
Depends on the type:
min. 0,2mbar
max. 600bar
From -40°C to 200°C
Accuracy in %: 0.1 / 0.2 / 0.5 / 1
Various Process-and electric connections
Application fields:
Chemical plants, machinery and mechanical equipment, hydraulic or pneumatic plant, pumps, compressors, etc
|
|
With the SITRANS P range we offer you a program for all applications %u2013 uniform measuring cells and housing as well as an operating concept via SIMATIC PDM inclusively:
SITRANS P DS III
The digital transmitter with HART or PROFIBUS-PA communication with ease-of-use through high performance.
SITRANS P300
The digital transmitter with HART or PROFIBUS PA communication and stainless steel housing. For the special requirements in the food, pharmaceuticals and biotechnology industry.
SITRANS P MK II
The low-cost analog solution for pressure measurement.
SITRANS P ZD
Digital pressure transmitter with a stainless steel housing and display.
SITRANS P Z
The single-range transmitter with the somewhat different housing.
SITRANS P Compact
Analog pressure transmitter series for the special requirements of the food-andbeverage, pharmaceuticals and biotechnology industries.
SITRANS P MPS
The transmitter for hydrostatic level measurement. |
|
When train speeds are high, there are two crucial requirements: safety and minimal wear. Only perfectly maintained bogies ensure that these demands are met. This is where the most recent Schenck development comes into play: the first test bed using spindle technology.
With MULTIRAIL® BogieLoad, Schenck is banking on safety through all around inspection. Electromechanically designed, the bogie test bed inspects the bogie using the so called spindle technology developed by Schenck. This novel feature increases repeatability and accuracy whilst reducing the maintenance expenditure.
The novel test bed technology of SCHENCK is used for the inspection of high speed train bogies. BogieLoad measures and acquires the wheel load distribution with the use of weighbeams. Geometrical data e.g. axis parallelism, are among the additional measuring parameters.
Typical application: bogies of high speed trains ICE 1, ICE 2, ICE 3, ET 420, ET 426.
|
|
hPa, bar, °C, mA, V
•Temperature compensated differential pressure sensor 0 to 2000 hPa integrated in the instrument
•2 accuracy classes 0.1% / 0.05% of final value
•Measurement of leakage rate (pressure drop per time)
•Monitoring of pressure drop in containers, pipes etc. via the integrated checking menu
•2 probe inputs for connecting further probes for pressure, temperature, current/voltage |
|
hPa, mbar, Pa, micron, bar, psi, °C/°F, tcu, toh, eC/L
•Vacuum measurement with accurate vacuum sensor
•Internal temperature sensor and external temperature probe input
•Calculation of overheating, subcooling, DT
•Convenient data evaluation on notebook/PC
•Valve block for evacuation, filling and changing the flow directions of a system |
|
Do you attach special value to the durability and performance of your vacuum instrumentation? We as developer and manufacturer of vacuum transducers, gauges, vacuum meters and controllers supply products which will exceed your expectations.
Thyracont Vacuum Instruments GmbH supplies vacuum measurement and control instruments for rough to ultrahigh vacuum.
All our products are “Made in Germany”
More information please find on our website http://www.thyracont.com |
|
Applications:
The universally applicable process-controlled hand-held
instruments, Series P600, are ideal for measuring
operations in which high accuracy counts or the possibility
of online documentation is demanded.
Product features:
- RS232 interface galvanically isolated
- Optional SmartGraph Windows Software for graphic and
tabular documentation
- High measuring accuracy
- Integrated calibration function for simple compensation
of sensor tolerances
- Physical 1-point, 2-point or 3-point calibration function
- Measuring channels are freely assignable
- Recording maximum, minimum, hold and average values
- Integrated sensor holder for one hand operation
- Mains operation possible
- Simultaneous display of two measured values
- Differential temperature display |
|
Alcatel Vacuum Technology is proud to introduce the Adixen 2000 vacuum measurement series, blending experience and innovation.
The 2000 gauge series provides pressure measurement from atmosphere down to 4.10-10 mbar. The Adixen gauges and controllers give you more than a simple pressure measurement, connected to a network with 2 set-points, 0-10 V or RS 485, the gauges can drive a production process or record the pressure trend and more. |
|
Dynisco Instruments has introduced its new Melt Monitor™ line of pressure sensors. These products feature an integral digital display and are designed for the rigorous environments of the plastics extruder.
An optional built-in temperature measurement sensor is available with the Melt Monitor. With this feature, the monitor’s dual 5-digit LED display can show temperature and pressure readings simultaneously.
|
|
Features:
- Large 5-DIGIT Display (0.8")
- LED Bar Graphs (Process & Set Value)
- 90-260VAC Power
- 6"Stem + 30"Flex Hose (MG200, MGJ)
- 1% combined error
- 750oF (400oC) Rating
- Ranges from 0-500 to 0-20,000psi
- Rotateable Display (270deg)
- Standard Thread (1/2-20UNF)
- Temp Sensors J (MGJ)
- Retransmission : 4-20mA, 0-5,10VDC |
|
| ... products without technical information |
| |
|
|
see the results for the following category
