|
|
Fonon's Zero Width Laser Dicing Technology® (ZWLDT®) will cover unprecedented explosive growth and demand in semiconductor markets in China, Taiwan, Japan and Korea. This technology has lead to products, such as the BlackStar™, that offer the best in silicon wafer dicing over existing technologies.
ZWLDT® will slice the wafer much safer than mechanical saws that may cause wafer damage, and increase the yield per wafer as well as maximum throughput while minimizing the HAZ.
With the technology Fonon acquires, Fonon Display and Semiconductor Systems (FononDSS), has been able to launch a number of products that make the most of the technology for the semiconductor and flat panel display industry.
|
|
IPTE 's depaneling systems offer a unique combination of cutting tools, material handling and tooling to cut high technology panelized printed circuit board assemblies. They can be utilized in all kinds of production environments and can be seamlessly integrated, for example, in in-line manufacturing environments with automated ingoing and outgoing feeder units, and also be used in stand-alone configuration for manually supplied loading and unloading of boards.
|
|
LPKF MicroCut
Capable of cutting any shape without burrs
The LPKF MicroCut is a high-performance stencil laser. The LPKF MicroCut is capable of cutting any shape at up to 50,000 openings per hour.
The laser can cut apertures as small as 30 µm with a roundness better than 96%, and its effective material focus diameter produces sharp contours.
As a result of the new cutting technology post-treatment is not necessary anymore.
Absolute flatness of the material is reached also with highest component density by the new LPKF PulsShape function.
|
|
Panasonic's UV laser scriber has a complete laser optics bench that offers flexibility to fit the specific application - the result of PFSA's experience in high volume microelectronic manufacturing and expertise in productivity.
The laser scriber enables the non-mechanical scribing and dicing of wafers. Primary uses include application for low and ultra-low 'K' wafers as well as non-mechanical scribing over metalized portions in the wafer streets which enables smaller kerf widths - allowing for greater numbers of die per wafer.
The UV Scriber enables sample builds for next generation products and maximizes die-level densities to reduce costs and increase profits.
Features & Benefits
Low K scribing with superior quality over mechanical dicing
Next generation supported via sample builds
Configurable for development of future capabilities
Increase profits by optimizing die-level density
HVM capable today
|
|
Stealth Dicing Technology
In Stealth Dicing, a laser beam at a wavelength capable of transmitting through the material is condensed on an internal point in that material. This selectively forms a mechanical damage layer (stress layer) in a localized point near the light focus area so that the material is cut from the "inside". The operating principle of stealth dicing is fundamentally different from conventional blade dicing technology that cuts the material from the "outside".
|
|
| ... products without technical information |
| |
|
|
|
|
Sandvik Coromant’s new GC1125 grade lives up to the demands of the leading parting and grooving tooling system, CoroCut® 1-2 edge and is now the first choice to achieve improved performance in parting, grooving, turning and profiling operations in a wide geometry range.
The optimization of properties for this grade delivers a wider application area and the capacity to handle improved cutting data. GC1125 has a good all round ability and provides the means to improve performance in a wide geometry range across many parting, grooving, turning and profiling operations. It is the first choice for application in steel and stainless steels and excels when machining cast iron and HRSA materials.
These advantages result from a technological breakthrough in coating and substrate technology. The combination improves wear resistance and security, either when running at higher cutting speeds or for a longer time in cut. The coating is new, PVD with TiAIN layers, including properties designed for the GC1125’s wide application area. New, fine grained substrate optimised for steels and stainless steels has improved hardness and supports increases in cutting data.
GC1125 is a simpler option, enabling machine shops to do more with one grade. Its wide geometry range offers improved performance to a larger number of machining operations.
In parting, it is optimised for steels, stainless steels and HRSA materials, a first choice in CF and CR geometries. CF is the low feed choice, giving excellent chip control and surface finish, CR the strong geometry for parting off bars and interrupted cuts at high feeds.
|
|
ISCAR-GRIP
Parting Inserts
DO-GRIP
First choice for parting. Double-ended inserts. Self clamped for deep grooving and large diameters. Screw clamped for small diameters.
SELF-GRIP
Single-ended insert for deep grooving and large diameters. Has a stopper for high radial accuracy.
CUT-GRIP
Single-ended insert. Self and screw clamped options. For tool users.
DO-GRIP for Swiss Automatics. The most economical, double-ended parting and grooving inserts in 1.0 - 3.0 mm (.039 - .118") widths that can be mounted on small shank 8, 10, and 12 mm (.315, .394, and .472") holders. The new design has a very short clamping head and with a slanted screw for convenient
indexing. These features are essential for operating on Swiss type automatic machines that have very limited space.
DO-GRIP is an optimal solution for grooving and parting of small shafts and tubes.
|
|
Sandvik Coromant is now extending its premium program of cutting tools for parting and grooving which will, no doubt, have great influence on machining productivity.
CoroCut 3 brings a third cutting edge to the shallow parting of tubes, bars and grooving operations. The extremely small parting widths in 2,0, 1,5 and 1,0 mm facilitates will reduce the raw material usage considerably.
The insert is held securely by a unique clamping solution ensuring accurate location and easy to use. This in combination with very tight indexing tolerances will produce workpieces with very close length tolerances.
Two dedicated insert geometries ensure peak performance and excellent surface finish in all workpiece materials. The very same holder can be used for all insert widths giving maximum versatility.
|
|
|
|
|
|
Grooving and Parting-Off applications just got better. Introducing TGP25 and TGP45 - new grades, new technology with DURATOMICTM coating gives impressive results.
Not only do these two grades feature the Duratomic coating technology, they also mark the beginning of a new generation for grooving and parting-off. Although designed for steel machining, these grades can also be used in cast iron and stainless steel with excellent results.
TGP25 - THE NEW GRADE FOR GROOVE TURNING
The unique and secure clamping system of Seco Multi Directional Turning (MDT) allows high speeds and feeds while securing long and consistent tool life.
The rigidity of Seco MDT can be used to fully exploit the extended cutting data capability of TGP25. Available in all widths, corner radii and chipbreakers,
TGP25 gives outstanding performance over a large application area and its superior edge integrity ensures an excellent surface finish too.
TGP45 - THE LATEST GRADE FOR PARTING-OFF
Team up the impressive stability of the HSS-blades for parting-off with 150.10 inserts and you can take full advantage of the cutting data capabilities of TGP45.
With superb performance in a wide application area, TGP45 is available in the most common widths and chipbreakers. It has a high level of wear resistance and allows high cutting data together with long tool life. The superior edge integrity will give you an excellent surface finish as well.
TGP45 is also a good choice for milling when using 335.10 disc milling cutters.
|
|
| ... products without technical information |
| |
DIADISC 45OO
High-tech precision cut-off saw for the laboratory
This new precision cut-off saw has been designed for almost universal
use in laboratories. The standard model is thus optimally equipped.
Special characteristics:
Switch-controlled electrical cutting height adjustment of saw blade
Sliding table, free of play, with prismatic roller guides
Parallel stop with digital measuring system and fine adjustment
Integrated suction arm with brush head. It can be swivelled and adjusted in height
Integrated Micro-atomizer for selective dry or wet operation for highly efficient lubrication and cooling of the saw blade and workpiece
Reserve content level indicator for the micro-atomizer tank
Halogen illuminated work area, with non-dazzle and dimming features
Optimum positioning of operating and display elements
Saw blade and cutting disk depot for 6 tools in the machine (optional)
|
|
Retsch SM 2000 cutting mills are especially high performance and user-friendly machines for crushing tough, medium-hard, soft, elastic, brittle and fibrous materials. Running slowly or quickly with different rotors and hoppers, they crush a wide range of materials, eg:: waste samples, plastic parts, biological substances, food and animal feed and beverage cans. The SM 2000 mills are therefore ideal for research, testing and operational laboratories, for technical training facilities or for creating samples in production.
Further model: SM 100.
Product Advantages:
powerful size reduction, even of heterogeneous mixtures
defined final fineness
low heat build-up
wide range of accessories for universal use
central locking device
fold-back housing
easy cleaning
robust, safe design
2-year warranty, CE-conforming
|
|
|
|
|
|
In foodstuff laboratories, in chemical or biological research institutions - suitable analysis material is required everywhere for precise examination of foodstuffs. With the GRINDOMIX Knife Mill, Retsch now produces a grinding and homogenising machine that fulfills professional laboratory and analysis requirements. It processes foodstuffs with high water, oil or fat contents just as rapidly and reliably as dry, soft or medium-hard products. For the first time, Retsch provides a professional alternative to standard household mixers.
With the special cutting knife system and the variable grinding chamber of the Grindomix, the materials can be processed into an homogeneous analysis sample, quick and easy. Two straight knives at different heights, arranged at right angles to the direction of rotation, turn at a speed between 2,000 and 10,000 rpm in the centre of the mill vessel.
Product Advantages:
powerful speed-controlled 750 W industrial motor
speed pre-selectable, range 2000 - 10000 min-1
digital display of grinding time and speed
interval operation possible
three memory keys
gravity lid for automatic grinding chamber volume adaption
comprehensive range of accessories
sample vessel easy to clean and exchange
|
|
|
|
|
|
Cutting mills are particularly well suited for comminution of soft to medium-hard, fibrous or tough materials (including plastics). They are frequently also used in the preparation of heterogeneous substance mixtures and for sample preparation for RoHS and WEEE analysis. In this type of mill, samples are comminuted through cutting and shearing. The fineness is determined by a sieve insert.
Various knife geometries and replaceable blades ensure maximum flexibility and durability. Grinding parts of various steel types as well as of hardmetal tungsten carbide can be used for controlling the abrasion problems.
All grinding parts can be removed for cleaning in just a few seconds without tools – unbeatable fast, simple and efficient!
YOUR ADVANTAGES WITH FRITSCH CUTTING MILLS
- Especially simple operation for fast work
- Unmatched ease of cleaning thanks to patented quick opening facility
- Optimum airflow for particularly fast grinding and secure protection against clogging
- More stable running and low wear due to the patented double cone bearing of the rotor
- Exceptionally long service life through use of replaceable and fixed knives
- Unique grinding chamber geometry: minimal dead space and progressive cutting geometry between the rotor and the fixed knives – for faster and simpler operation
- Grinding parts with different cutting geometries and materials - perfectly adjustable to your application
By the way:
FRITSCH Cutting Mills are available in different configurations – for each application the perfect Mill!
|
|
| ... products without technical information |
| |
UNIQUE GLOBAL SUPPLIER !
With the AXXAIR global concept you may upgrade the tube cutting machines from:
· simple orbital cutting
· to automatic orbital cutting
· to automatic orbital cutting and welding for prefab applications: CC+SASL
· to traditional orbital welding with closed heads: SASL+SATF
IN A FEW MINUTES ONLY !
|
|
|
The Modular Drive System from Bug-O Systems can provide continuous welding at precise travel speeds, producing flawless welds in a fraction of the time required by hand welding. Various types of rail allow the system to be used on all types of work. Alternative Control Modules allow the system to perform continuous stringer welding, weave welding, stripping, beveling and programmable shape cutting.
|
|
|
|
|
|
The KatII incorporates everything required to automate your
cutting/ welding operations...quickly, easily, economically. It is
comprised of the Kat II travel carriage and rigid 8 ft. (2438mm)
straight track and torch or gun holder assembly. The carriage
travels in a forward or reverse direction (vertical or horizontal) on
its track, moving the torch or welding gun along the pre-set path
at precisely controlled speeds. The accuracy, uniformity and
quality of the cut or weld is improved. Productivity is increased.
Costs reduced. It is important to note that the Kat II carriage is
not designed to travel on radius roll formed track.
AND...YOU CAN EASILY CONVERT YOUR KAT II
INTO AN EXCELLENT CIRCLE CUTTING MACHINE
This Gullco accessory, comprised of undercarriage, radius
arm and centering pin, eliminates the need for track. The
travel carriage is readily fitted on the top of the undercarriage.
Its drive system engages the undercarriage gears
...moving the assembly in a forward or reverse direction
at desired cutting speeds along a perfectly circular path. A
slide lock on the radius arm allows fast, easy adjustment of
II the circular diameter.
|
|
Submerged arc welding (SAW) is a highly efficient automation welding method. There are numerous customers around the world who currently weld in ESAB applications. Our large range of pressure welding heads in the A2 and A6 series are the basis of our SAW-welding automations, such as welding beam-travelling carriages, welding tractors, welding portals and length welding fixtures. Depending on the application, fully automatic SAW welding can be carried out with one or more pressure welding heads at the same time. Each head has single welding wire or twin welding wires or other highly productive solutions.
At ESAB we have turnkey solutions for automated SAW welding and have also developed accompanying equipment, such as fully automatic flux management systems and seam tracking systems for maximum optimisation and profitability for our customers.
|
|
Dual Guard(TM), Heavy Duty Cutting, Welding, and Heating Outfits
Dual Guard(TM), Heavy Duty Cutting, Welding, and Heating Toolbox Outfits
Dual Guard(TM), Heavy Duty Hand Cutting Torch Outfits
Dual Guard(TM), Medium Duty
Tough Cut(TM), Medium Duty
Tag-A-Long(TM), Portable
Versa-Torch®, HVAC/R
Quickbraze®, HVAC/R
Versa-Torch® Standard Tip Selections
Versa-Torch®/Quickbraze® Tip Selections
Handi-Heet®, Soldering & Brazing
Silver Smith(TM), Soldering & Brazing
The Little Torch®, Jewelry/Hobby
The Little Torch®, Jewelry/Hobby Caddy Kits
The Little Torch®, Jewelry/Hobby Tips and Technical Information
|
|
Design:
- Hand torches for flame cutting up to 500 mm
- Hand torches for flame gouging
- Special versions for scrap cutting
- Different sizes and different length
- Available with DIN, BS and CGA connections
- For all fuel gases
Advantages:
- Valve-forward design ensures maximum operator safety
- New valve design guarantees higher gas flow rates and enhanced cutting capacity
- Heavy-duty head avoids overheating
- New monoblock valves improve operator control and allow precise adjusting also with gloves
- Triangular arrangement of stainless steel tubes provides high durability and maximum stability
- Modular design (also with STARLET and STAR torch systems) reduces maintenance cost and downtime
Product Range:
- Hand torches for flame cutting
- Hand torches for flame gouging
- Scrap cutting torches
- Accessories, wearing parts
|
|
|
|
|
|
-Combined Welding- and Cutting Torches
hand grip for normal hoses
welding attachment in 9 sizes from 0,2 to 25mm welding range
tubular welding attachment in 4 sizes from 1 to 9mm welding range
more-flame-attachment in 4 sizes from 4,0 to 19mm heating range
cutting attachment with concentric nozzles and wing or lever operation for
cutting oxygen valve and cutting ranges from 3 to 300mm
a hole cutting torch from 3 to 50mm cutting range
and sets (assortments) of different compositions in a steel storage case.
-Soldering torches – air inlet by torch insert
The programme contains different hand grips, welding torches, welding heads with extension tubes and different compositions - sets – as well as soldering irons.
Sets are assortments of various hand grips and inserts for different applications like soldering, brazing etc.
-Propane - Oxygen
Set for heating
Heating torches
Cutting torches
Cutting torches with concentric nozzles
-Propane/Accessories
Pressure regulators for propane
Small-Propane-gas bottles
Double hose
Distributors
Pressure propane hoses
Detachable hose tails
-Pressure Regulators for bottled gases DIN EN ISO 2503
Single-stage pressure regulators
Two-stage pressure regulators
Pressure regulators with volume meter Single- and two-stage
|
|
The Koike Aronson IK series features a high speed tracing system that is capable of following a pattern at speeds of up 120 IPM. The IK series of machines support oxy/fuel and plasma cutting processes; the maximum tool load on the machine is two tools.
The IK series of machines utilize the HL-83A coordinate drive tracing system with speed ranges from 4 to 160 IPM. Options available on this machine include CNC controls, plasma systems, and cutting tables.
MACHINE FEATURES
Available cutting widths: 4', 5' and 8'
Available cutting lengths 10 and 20 feet
Versatile cutting for large and small applications
|
|
|
|
see the results for the following category : 
