|
|
AutoPoint DT is a fixtureless, gridless flying probe with a unique power-off impedance analysis measurement system. Excellent for Manufacturing Defect Analysis (MDA) testing and Field Return Failures.
Supplied as a Stand Alone System or integrated with the PinPoint II Advanced Diagnostic Test System System
|
|
General description:
The InnoLas wafer sorting system IL 2600 can automatically sort, split merge and transfer wafer from any slot / cassette to any other slot / cassette in a six cassette array.
Wafer sizes from 100 mm to 200 mm can be handled without any mechanical adjustment in a single or multi-batch operation.
The laser mark code read for verification can be located at any position on the front and/or backside of the wafer.
The basic model has one reading unit (OCR, BC412, T7) for reading the laser code on the frontside of the wafer.
A second reading unit (OCR, BC412, T7) for reading the code on the backside of the wafer can be mounted as an option.
|
|
The 5800 series is a multi-configuration multi-functional test system that is designed to meet the ever changing needs of today's electronic manufacturing environment. An open approach to both hardware and software has been adopted. The open software architecture enables integration with code written using third party software such as Teststand™, Labview™, C#™ and VB.NET™, in short any platform that is .NET compliant.
The open hardware architecture allows configurable chassis and interface styles to accommodate low cost analog in-circuit testing, through to high integrity analog and digital functional test solutions. The integrated 21-slot PXI based backplane enables the user to implement solutions using not only Aeroflex PXI cards but also cards from any PXI card supplier. The 5800 Series of testers comprises three body styles, the 5850, 5830 & 5820.
|
|
|
IPTE develops test equipment, test handlers and turn-key solutions for the automation of testing and adjustments of PCB's and electronic products
|
|
The S790VXI Series2 represents the ultimate high-performance, mixed signal ATE system. Its advanced hardware technology, coupled with CATE software for fast effective program production, makes the S790 Series2 the ideal solution for addressing today's major board test concerns - test program generation,and diagnostic speed and accuracy.
Protecting your investment - with complete S700-series backward compatibility. Fully compatible with all Schlumberger S700 test systems, the S790 Series2 provides a complete, riskfree migration path for all S700 series test programs.
Protecting large investments into earlier S700 test programs and fixtures is, for most users, a major concern. The S790 Series2 protects your investment; its compatible architecture allows existing test programs and fixtures to be loaded and run - simply and robustly - providing an assured, risk-free migration path.
All diagnostic data is also ported, avoiding lengthy and costly revalidation of new or modified diagnostics
|
|
|
|
|
|
ATE QT2256-320PXI system is designed as a Combination Board Tester capable of testing highly complex and dense PCBs employing various test techniques on a single platform.
It can perform Board Level Functional Test through edge connectors of a PCB, and guided probe diagnostics utility to reliably repair Digital/Analog and Mixed Signal PCBs of various complexities for conventional PCBs.
It is an In-Circuit Device / cluster tester when High Current Pin Driver options are installed and interfaced to the UUT either through clips / probes or nail bed. Standard configuration is 64 Channels high current Pin Drivers.
It has in-built 20MHz 12bit Analog Driver / sensors synchronized with digital drivers for covering analog / mixed signal devices.
Integrated Boundary Scan Test controller (Up to 4 Chains) and software package can be used to test today’s PCBs with high density / high pin count devices. Uses latest technology Boundary Scan hardware with RAM based drivers / sensors in synchronization with ATE digital and analog pin drivers.
To effectively test CPU based boards without excluding the CPU from the test, the system offers optional Qmax patented Bus Cycle Signature System.
|
|
|
|
|
|
Fault coverage and return on investment, two major factors affecting the choice of a test system in today's competitive markets.
Combine these with the flexibility to adapt as technology advances and you have the blueprint for the most desirable test system on the market.
From board to program - the solution
PinPoint II 14 slot, has been engineered to meet these criteria. It is the fastest, most economical functional test workstation available, giving the best return on investment in the industry whether configured for diagnostics or functional test.
PinPoint II has, in its high specification and modular design, the stride and flexibility to keep one step ahead of the fast evolving electronics market. It is equally well suited to `one-offs' as it is to production quantities and the combination of test technologies within the one powerful environment provides the key to the diverse range of applications the system is suited to. In-circuit functional test of both analog and digital components, edge card functional, VI analysis, boundary scan, PXI test and schematic reverse engineering can all be included in the same test platform. Flexibility extends further into the interfacing of the tester to the unit under test. The PinPoint II has been developed to adapt to the needs of the customer - clips, probes, edge connectors and bed-of-nails fixtures can all be used.
|
|
Features
Integrated test system
Compact footprint
Fixtures compatible with TCIL-P and TCIL-TS
Compact PLC for internal controls
Visualization and tester interface on external PC (e.g. tester PC) via USB interface
Stand alone operation
Manual width adjustment
SMEMA Interface
Compatibility with all standard test systems
Options
Product specific fixtures
ESD covers
Safety automatic door
|
|
| ... products without technical information |
| |
Damped oscillatory waves are phenomena associated with the opening and closing of High Voltage (HV) busbars in power transmission stations and High Altitude Electromagnetic Pulses (HEMP).
The IEC61000-4-18 standard extends to existing 100kHz and 1MHz frencies with additional fast damped oscillatory waves at frequencies of 3MHz, 10MHz and 30MHz.
EMC PARTNER designed the MIG-OS-OM-EXT to add fast oscillatory wave capability to existing EMC PARTNER generators.
MIG-OS-OS1 and MIG0603OSI generators deliver 100kHz and 1MHz slow damped oscillatory waves that were specified in the IEC61000-4-12 Ed1 standard.
For power applications, the equipment to be tested is generally connected to 3-Phase power lines. CDN3000A-06-25 enables coupling of both fast and slow oscillatory waves.
HEMP applications require capacitive coupling. CN-EFT1000 enables coupling into unshielded wires.
|
|
UE RAS: REMOTE ACCESS SENSOR - When remote sensing or access is an issue. Easy to install & simple to use.
RAS-MT REMOTE ACCESS SENSOR - Magnetically mounted contact probe with cable and remote access module (RAM) for testing consistency and for hard to reach test points. RAS-MT is included with the Ultraprobe 10,000 Inspection System and is an optional accessory for the Ultraprobe 9000.
UE MMP-7, UE MMP-8 & UE MMP-2U: MAGNETIC MOUNT PROBES - Magnetic Mount Probe with transducers and male connecting pins for attachment to the STM-2, STM-9 or STM-1 stethoscope modules.
|
|
Testing of Electricity Metering equipment, takes many different forms. Apart from accuracy and stability, meters must also be tested against interference conducted on the elctricity cables. This can be in the form of impulses generated by lightning events, switching action in the mains network or insulation breakdown. EMC PARTNER specializes in designing test equipment to meet the international standards for impulse testing of energy meters. IEC61036 and IEC62052 are typical standards for class 1 and 2 metering equipment.
EMC PARTNER testers are compact systems with several impulse types in one unit. The necessary personnel protection is provided by safety interlocked test cabinets.
|
|
|
The model DM50 is designed to measure distances between two points in a simple, fast and efficient way thanks to the integrated laser pointer and small size which make it a completely portable tool for use in every situation and in any application (buildings, electricity sector , hobbies, etc...) where it may be necessary to perform a measure of linear length. The tool also allows you to perform calculations of areas and volumes and the indirect measure of heights by using the principle of mathematical theorem of Pythagoras. A practical side button enables the activation of measures quickly with the help of a small bubble level air for a perfect alignment of objects in the test. The management of simple operations with the internal memory (sums and subtractions) and a backlight display complete the features available for the instrument
|
|
| ... products without technical information |
| |
The TRANSIENT 2000 family of generators, replicate EMC events that can be observed in the low power distribution system, telecommunication or data lines.
TRANSIENT 2000 generators can replicate the following phenomena:
ElectroStatic Discharges (ESD), Electric Fast Transients (EFT),Combination Wave(CWG), 100kHz Ringwave and 10/700us Telecom, AC and Impulse Magnetic Fields, AC and DC power line interruptions (DIPS).
TRA2000 can be expanded for;
Common Mode tests(DC to 9kHz), Balanced & un-balanced telecom tests, magnetic fields, Three Phase Testing to 100A for EFT, SURGE, 100kHz Ringwave, Dips & Interrupts.
Available with customer specific multiple event combinations (ESD, EFT, SURGE, RING, DIPS), EMC Partner TRANSIENT generators can all be upgraded to add more capability when required.
Unique in their class, TRANSIENT immunity systems include as standard an internal motor variac to enable Dip and Variation tests, at any user programmable level, as per IEC 61000-4-11 Ed2.
|
|
| ... products without technical information |
| |
|
|
|
|
Flo-Check USB represents the next generation of hydraulic test equipment. This technologically advanced device simultaneously measures flow, pressure, temperature and power within a hydraulic system. Data is displayed and logged through a custom Windows®-based software application; data is received from the Analyzer through a standard USB cable (both software and cable are included with the unit). The unit is bi-directional, provides an accuracy of ±1% of full scale, and includes a low-resistance load valve and internal pressure relief discs.
The Flo-Check USB Hydraulic System Analyzer can be used as a stationary or portable tester for both industrial and mobile hydraulic system diagnostics, and analysis of the prognostic health of a hydraulic system. It features flow, pressure, and temperature sensors that are monitored by a data acquisition module. This module records the operating parameters of the system and transfers them to the user’s laptop via the USB port. It can log up to 12 hours with option to capture data manually or continuous monitoring. Data can be exported to Microsoft Excel® and other spreadsheet programs.
Flo-Check is powered through the USB port of a PC, making it easy to setup and ideal for portable applications. Interfaced to the PC application, the device offers a straightforward method of monitoring system parameters complete with data acquisition.
|
|
|
Flo-tech portable testers are the leaders in state-of the-art hydraulic testing equipment. Offered in three models in a variety of sizes, the compact testers are designed for fast, diagnostic troubleshooting of both mobile and stationary hydraulic systems and components. The PFM6 measures flow, pressure, and temperature simultaneously from one point, while the PFM8 series provides an additional dynamometer for power calculation (HP and kW). In addition to portable testers, Flo-tech manufactures a wide variety of in-line turbine flow meters for hydraulic fluids.
|
|
|
The Flo-Check USB represents the next generation of hydraulic test equipment. The device simultaneously measures flow, pressure, temperature and power within a hydraulic system. This data is displayed and logged through a custom Windows®-based software application; data is received from the Analyzer through a standard USB cable (both software and cable are included with the unit). The Flo-Check USB is ideal for testing, troubleshooting and diagnosis in mobile and industrial hydraulic applications, and for setting hydraulic components such as pumps, valves and motors. The unit is bi-directional and includes a low-resistance load valve and internal pressure relief discs.
|
|
|
|