|
|
General description:
The InnoLas wafer sorting system IL 2600 can automatically sort, split merge and transfer wafer from any slot / cassette to any other slot / cassette in a six cassette array.
Wafer sizes from 100 mm to 200 mm can be handled without any mechanical adjustment in a single or multi-batch operation.
The laser mark code read for verification can be located at any position on the front and/or backside of the wafer.
The basic model has one reading unit (OCR, BC412, T7) for reading the laser code on the frontside of the wafer.
A second reading unit (OCR, BC412, T7) for reading the code on the backside of the wafer can be mounted as an option.
|
|
AutoPoint DT is a fixtureless, gridless flying probe with a unique power-off impedance analysis measurement system. Excellent for Manufacturing Defect Analysis (MDA) testing and Field Return Failures.
Supplied as a Stand Alone System or integrated with the PinPoint II Advanced Diagnostic Test System System
|
|
The 5800 series is a multi-configuration multi-functional test system that is designed to meet the ever changing needs of today's electronic manufacturing environment. An open approach to both hardware and software has been adopted. The open software architecture enables integration with code written using third party software such as Teststand™, Labview™, C#™ and VB.NET™, in short any platform that is .NET compliant.
The open hardware architecture allows configurable chassis and interface styles to accommodate low cost analog in-circuit testing, through to high integrity analog and digital functional test solutions. The integrated 21-slot PXI based backplane enables the user to implement solutions using not only Aeroflex PXI cards but also cards from any PXI card supplier. The 5800 Series of testers comprises three body styles, the 5850, 5830 & 5820.
|
|
|
IPTE develops test equipment, test handlers and turn-key solutions for the automation of testing and adjustments of PCB's and electronic products
|
|
The S790VXI Series2 represents the ultimate high-performance, mixed signal ATE system. Its advanced hardware technology, coupled with CATE software for fast effective program production, makes the S790 Series2 the ideal solution for addressing today's major board test concerns - test program generation,and diagnostic speed and accuracy.
Protecting your investment - with complete S700-series backward compatibility. Fully compatible with all Schlumberger S700 test systems, the S790 Series2 provides a complete, riskfree migration path for all S700 series test programs.
Protecting large investments into earlier S700 test programs and fixtures is, for most users, a major concern. The S790 Series2 protects your investment; its compatible architecture allows existing test programs and fixtures to be loaded and run - simply and robustly - providing an assured, risk-free migration path.
All diagnostic data is also ported, avoiding lengthy and costly revalidation of new or modified diagnostics
|
|
|
|
|
|
ATE QT2256-320PXI system is designed as a Combination Board Tester capable of testing highly complex and dense PCBs employing various test techniques on a single platform.
It can perform Board Level Functional Test through edge connectors of a PCB, and guided probe diagnostics utility to reliably repair Digital/Analog and Mixed Signal PCBs of various complexities for conventional PCBs.
It is an In-Circuit Device / cluster tester when High Current Pin Driver options are installed and interfaced to the UUT either through clips / probes or nail bed. Standard configuration is 64 Channels high current Pin Drivers.
It has in-built 20MHz 12bit Analog Driver / sensors synchronized with digital drivers for covering analog / mixed signal devices.
Integrated Boundary Scan Test controller (Up to 4 Chains) and software package can be used to test today’s PCBs with high density / high pin count devices. Uses latest technology Boundary Scan hardware with RAM based drivers / sensors in synchronization with ATE digital and analog pin drivers.
To effectively test CPU based boards without excluding the CPU from the test, the system offers optional Qmax patented Bus Cycle Signature System.
|
|
|
|
|
|
Fault coverage and return on investment, two major factors affecting the choice of a test system in today's competitive markets.
Combine these with the flexibility to adapt as technology advances and you have the blueprint for the most desirable test system on the market.
From board to program - the solution
PinPoint II 14 slot, has been engineered to meet these criteria. It is the fastest, most economical functional test workstation available, giving the best return on investment in the industry whether configured for diagnostics or functional test.
PinPoint II has, in its high specification and modular design, the stride and flexibility to keep one step ahead of the fast evolving electronics market. It is equally well suited to `one-offs' as it is to production quantities and the combination of test technologies within the one powerful environment provides the key to the diverse range of applications the system is suited to. In-circuit functional test of both analog and digital components, edge card functional, VI analysis, boundary scan, PXI test and schematic reverse engineering can all be included in the same test platform. Flexibility extends further into the interfacing of the tester to the unit under test. The PinPoint II has been developed to adapt to the needs of the customer - clips, probes, edge connectors and bed-of-nails fixtures can all be used.
|
|
Features
Integrated test system
Compact footprint
Fixtures compatible with TCIL-P and TCIL-TS
Compact PLC for internal controls
Visualization and tester interface on external PC (e.g. tester PC) via USB interface
Stand alone operation
Manual width adjustment
SMEMA Interface
Compatibility with all standard test systems
Options
Product specific fixtures
ESD covers
Safety automatic door
|
|
| ... products without technical information |
| |
|
LeCroy's oscilloscopes can be turned into mixed-signal oscilloscopes (MSOs) with the addition of the MS-500 or MS-250 mixed-signal oscilloscope options. In addition, I2C, SPI, UART, RS232, LIN, and CAN triggering and decoding options turn these oscilloscopes into all-in-one analog, digital, and serial data trigger, acquisition, and analysis machines.
|
|
The VC200 is the ideal tool for testing GSM/WCDMA Mobiles during manufacture, maintenance, servicing, troubleshooting and point of sale.
Low cost GSM/W-CDMA mobile phone tester
- Supports all GSM & W-CDMA frequency bands
- Signaling tester mode
· Auto test mode
· Manual test mode
- Tx/Rx Tester mode
- Suitable for manufacture, maintenance and servicing
- Compact and lightweight
|
|
|
|
|
|
2201 ProLock
The 3G mobile phone tester for repair shops
Willtek’s 2201 ProLock is a reasonably priced test instrument for 3G mobile phones and wireless data cards. Level 1 and level 2 service shops use ProLock to quickly test wireless devices, perform smaller repairs and bill manufacturers for warranty claims.
The 2201 ProLock is similar to the 4100 and 4200 series instruments because it is small, easy to use and affordable to large mobile phone retailers with a repair shop in the back office. ProLock, however, supports both GSM and WCDMA phones and wireless devices. Many mobile phones today include WCDMA functionality; manufacturers start to demand WCDMA testing in case of warranty claims from repair shops. ProLock fills the gap between the cheap GSM-only testers and sophisticated 3G test sets!
Repair shops and manufacturers benefit
Local, small and medium size repair shops have been replaced by centralised repair factories. This led to customer dissatisfaction and high cost for small repairs or in the No Fault Found case. With the 2201 ProLock, smaller repair shops filter out these phones and return them to the customer almost immediately, resulting in satisfied customers and low cost of reverse logistics.
|
|
|
|
|
|
Willtek offers solutions for the test of mobile phones. Our solutions address the RF performance of the phone. Willtek offers different solutions, depending on the application:
Point of Sale / Point of Return - Go/NoGo testing
Very often phones returned into the service loop are not having any technical problems, the problems are more to do with bad coverage or "manual not read" syndrome. In order to prevent these phones being returned for service , testing should be done at a very early stage at the point of sale or point of return. Willtek's Go/NoGo testers are well known for their ease of use and uncomplicated user interface. Despite the simple user interface, the test sets are performing measurements according to the respective standards (e.g. GSM, CDMA2000, etc.)
Service and Repair Workshops
Because time and test speed are critical for today's service and repair shops, it is important to have a flexible test set which can test and align many different phones - and support the specific measurement routines required by different manufacturers. Willtek's test solutions are designed with a multi-technology platform, allowing them to invest in one instrument that supports all of today's technologies.
Manufacturing
In manufacturing time and simplicity of testing is crucial. Manufacturers focus on simple RF measurements to tune and align the phones. Willtek's test solutions provide fast, easy testing while providing comprehensive results. And as with our other solutions, the multi-technology platform helps manufacturers preserve their test equipment investment.
|
|
|
|
|
|
2303 Stabilock
Regular testing of TETRA phones ensures safe and reliable communication
In critical situations, users in the public safety and security sector fully rely on their communication devices. To help organisations such as police, fire brigades and paramedics provide maximum safety and reliability to their users, Willtek designed the 2303 Stabilock. It is the first TETRA mobile station tester which is specifically made for testing TETRA radios in a service environment. Service managers can now use the affordable instrument to ensure that the radios are fully operational; this is particularly important for the police, fire brigades and paramedics where lives may depend on proper communication tools!
The 2303 Stabilock delivers precise results the fast way. No matter if Trunked Mode or Direct Mode (optional), 400 or 800 MHz band: After setting up network parameters and frequency range the tester is ready for operation. The high contrast 6.5” TFT colour display is split into four sections for clear reading of test results in numeric or graphic format. All settings and commands are accessible via six softkeys or with one-hand operation using the turn-and-push dial. Reducing TETRA complexity to what is really needed in service – with this operational concept, users can operate the instrument easily with a few key presses on the Stabilock’s high-quality click-type keyboard. Alternatively, a standard USB mouse provides access to all screen elements as on a PC.
|
|
|
|
|
|
901 TDR LAN Cable Tester
Handheld TDR Meters
Model 901 is specially designed to speed up the onsite testing of data networks and production testing of cable assemblies. The meter quickly tests shielded and unshielded LAN cables and identifies all commonly found Pair, Split Pair, and Reversed Pair. Digital display shows these 5 common wiring faults and the provided 1 Female RJ45 to Female BNC remote identifier will make wire-mapping a breeze.
Features:
- Accurate to 2" (5 cm) throughout the entire range up to 2,000 ft (600 m).
- Digital Display shows 5 common wiring faults: Open Pair, Shorted Pair, Crossed Pair, Split Pair, and Reversed Pair.
- Includes 1 remote identifier for wire mapping.
- Extra-large backlit (ICON type 7 segment) LCD.
- Automatic output impedance control, auto-range, auto-zero and auto-sensitivity allows for closely matching to a wide range of cables under test. Only V.O.P (Velocity of Propagation) settings required.
- User-friendly menu on screen operation for easy-to-use.
- Measuring capability of the V.O.P of a sample cable.
- 20 internal memory locations store up to 20 traces for future analysis.
- Internal library of 39 standard cables.
- Tone Generator (Oscillating 910 to 1100 Hz with 5 Vp-p).
- Line Voltage Detection: Displays "OUCH" message and stops operation if line voltage exceeds 6.5 V.
- Safety Protection (up to 250 V RMS).
|
|
|
|
|
|
|
The DMM is a professional instrument with TRMS measurement of AC/DC voltage, AC/DC Current (through external clamp), Resistance and Frequency. Additional features are MAX/MIN/AVG function, HOLD function and PEAK detection with Response Time of 1ms, useful for surge currents detection. The Safety Tester features allow to perform test on electrical plants according to VDE0413. Measures of Continuity, Insulation, Global Earth value (also with 0.1W resolution), RCDs test, phase sequence indication and phase coincidence (using only one Test Lead even just touching even insulated cables or two Test Leads) and Leakage current (with HT96U clamp + NOCANBA connector) will be easily performed thanks to this new extremely compact instrument. An innovative function (AUTOTEST) automatically performs main safety checks in the plant (Earth Resistance measurement, RCD Test, Insulation Test) just connecting the instrument to a socket and pressing the TEST button. The instrument will give you a final response (OK or NOT OK) about the safety of the plant under test. Finally the LAN checker function allows you to check if the wire mapping in a LAN cable is correct or not with easy indications about the found errors, which will guide you though the troubleshooting. M75 is completed by a modern selector function knob, a large numeric display for easy readings of measurements and a protection rubber holder to prevent accidental damaged.
|
|
The ultimate platform for network experts. Combines physical, optical, transport and datacom testing in a single box. Perform simultaneous acquisitions and fast data post-processing, and benefit from a scalable range of test applications and field-interchangeable modules.
Key Features and Benefits
Five configurations (two-slot, four-slot, seven-slot, eight-slot and bus protector), providing maximum flexibility for long-haul, metro, DWDM, high-fiber-count, Ethernet, SONET/SDH or DSn/PDH test applications
Pentium-powered, with up to 512 MB memory
Easy-to-read, high-resolution 12.1 inch TFT screen
Windows® operating system
Simultaneous acquisitions and fast data post-processing
|
|
Willtek Secures Railway Safety
Based on the Willtek 4200, the Willtek 4202R Mobile Service Tester is dedicated to new features and frequency bands introduced by GSM-R, the railway communication system based on GSM. The Willtek 4202R is the first GSM-R test instrument for service applications, and its small size and low weight make it the ideal choice to test and repair applications requiring mobility.
Proper Performance Helps Emergency Situations
The Willtek 4202R allows the simulation of group calls (VGCS) at various priority levels. This includes emergency calls based on group calls to verify not only the performance of the cab radios, but also of peripherals such as optical and acoustical alarms. These tests ensure proper performance of the radio system and help prevent disaster in emergency cases.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
