|
|
MIG/MAG - conventional all-rounders and digital experts.
Our 1000 times tried and trusted step switch controlled machine series MIRA, SATURN and WEGA or the completely digital PHOENIX inverter machine series - it's your choice!
THE CONVENTIONAL ALLROUNDER - THE STEP SWITCH CONTROLLED MIG/MAG WELDING MACHINES MIRA - SATURN - WEGA
Tried and trusted more than a thousand times over: Robust, step switch controlled - specially designed for applications in trade and industry involving tough operating conditions. They offer universal applications thanks to the many different machine versions from compact/decompact and gas /water cooled through to various wire feed units. They also offer impressive, self-explanatory and intuitive operating concepts for varying requirements - the simplest possible operation for everyone!
PHOENIX - THE DIGITAL MIG/MAG PULSE WELDING MACHINES
This is our completely digital inverter range of machines with maximum simplicity and ease-of-use for all requirements from manual to complex automated MIG/MAG pulse and standard applications. The PHOENIX range promises maximum efficiency thanks to the low-spatter welding on all materials and application, perfect ignition and welding properties with 100 % reproducible results with maximum quality and optimised control interfaces for every application - and these machines keep that promise! It's up to you: PHOENIX PROGRESS - the ideal introduction to the digital machine range - or PHOENIX EXPERT - the high-end system for complex applications, and not just in automated systems. Whichever you choose, you will get pre-programmed welding tasks (256 JOBs) so that you can concentrate fully on your work. The portable design of the PHOENIX 300 also impresses with maximum mobility for assembly work. All in all, the PHOENIX range is ideal for robot, industrial bus and mechanised applications and documentation via optional interfaces! |
|
Small but strong MMA professionals
Our PICO machines are small, robust and lightweight - in other words, specially developed for construction site and assembly usage. And now they're even stronger!
The PICO MMA professionals from EWM are now even stronger! An intelligent casing design ensures greater performance via better cooling thanks to an optimised cooling air supply - and dirt is kept out of the machine. As ever our PICOs are small and at just 4.8kg (PICO 162) very lightweight and compact - so are ideal for all open-air applications. They have excellent ignition and welding properties optimised for the various electrode types due to arcforcing, hotstart and antistick as standard. The small MMA professionals are idea for use in any construction site application thanks to safe welding operation with long mains supply leads, on cable drums, on weak mains systems and on a generator. The PICOs are really tough as functionality and safety are ensured if dropped or knocked thanks to the intelligent casing design and plastic. This makes them ideal for construction sites and assembly work! |
|
Our flexible TIG specialists.
Whether you choose PICOTIG, TRITON or TETRIX - with our flexible TIG machines you will always achieve the best possible results!
PICOTIG
Thanks to their exceptionally easy operation and outstanding welding properties, these welding machines produce excellent results in all applications - whether in assembly or production. The exceptionally easy-to-use one-dial operation is ideal for assembly, e.g. with frequent changes of personnel. The PICOTIG is also ideal for use on construction sites thanks to the exceptionally large mains voltage range for problem-free use on long mains leads and generators. It also provides uniquely high welding performance: 220 A welding current from the single-phase 230 V socket!
TRITON
Here you can experience maximum functionality with the simplest possible operation for professional TIG welding, e.g. thanks to the exceptionally easy-to-use one-dial operation, the 8 welding programs (JOBs), etc. The TRITON also provides uniquely high welding performance: 220 A welding current from the single-phase 230 V socket!
TETRIX
Switch on and start welding - thanks to the unique EWM TIG Synergic one-dial operation with optimum preset values and 256 welding programs (JOBs). The digital system provides perfect ignition and welding properties with 100Ê% reproducible results of the highest quality. This makes it ideal for robot, industrial bus and mechanised applications and documentation via optional interfaces! |
|
Top of the range - our plasma welding machines.
Our innovative plasma welding machines MICROPLASMA and TETRIX PLASMA achieve maximum weld seam quality every time. They give efficient results of the highest quality.
The EWM plasma professionals just can't be beaten on versatility: Whether using DC plus pole, DC minus pole or AC - these machines with their precise plasma arc ensure targeted and concentrated heat feeding, high welding speeds, small heat-affected zones, low material distortion and deep fusion penetration. In addition, these powerful machines are ideal for use in multi-shift operation in production work.
The separate inverter for the pilot arc current and the digital system of TETRIX PLASMA provide consistent results here. MICROPLASMA and TETRIX PLASMA also offer outstanding welding properties thanks to the highly stable plasma arc from just 0.1A. What more could you want? |
|
| To achieve maximum welding rate and minimal labor cost, 6100 Automatic Welding Systems integrate a combination of standard Weldlogic products to provide a complete package. Specifically designed for precision automatic welding, 6100 systems allow circumferential, longitudinal and spot welds to be easily made with a minimum of operator skill. All components are fully intergrated to create a complete "ready-to-go" automatic welding station. |
|
This universal-kind of electrofusion machine is suitable for welding low voltage Polyethylene (PE) couplers (from 8 to 48 Volts) for high pressure conduits.
The POLYWELD machine is made in compliance with the current European standards and directives. |
|
The TIME Process is a tried and tested high-performance welding process for manual and mechanised applications that has been doing sterling service in industry for many years. By “high-performance”, we mean a welding process that achieves either a deposition rate of at least 8 kg/h, or a wirespeed of at least 15 m/min with 1.2 mm steel wire.
Now the TIME Process has been totally digitised. With all the attendant benefits that come as standard with Fronius digital welding systems, such as: 100 % reproducibility of all welding results, modular system principle, digital microprocessor control, superb welding properties. |
|
The latest generation of welding equipment can be programmed with specific process preferences of your individual choice or for the actual welding processes. Based on a solid state power source, it weighs just 1/80 of the 70 year old ancestors but has more power. Our different plasma cutting equipment enables you to quickly and accurately cut all types of metals.
|
|
Cold Metal Transfer (CMT), a new chapter in the history of welding. The TPS 5000 CMT is a fully digital micro-processor controlled inverter welding system that supports the Fronius CMT process. Besides MIG/MAG, the system is also suitable for TIG and electrode welding.
The innovation that the CMT process introduces is that wire feeding is integrated into process control. This makes it possible to reduce the amount of heat applied; and that means no spatter on the work piece join.
The TransPuls Synergic 5000 CMT with 500 A is ideal for applications in the automotive and automotive supplies industry, avionics and spaceflight, metal working and portal building. In fact, the system is suitable for any automated or robot assisted job. The typical fields of application are thin and ultra-thin sheet joins of 0.3 mm or more, MIG soldering of galvanized sheet metal, and steel/aluminum joints.
|
|
Metal Inert Gas welding and Metal Active Gas welding are the most widely used welding processes in the world today. The range of possible uses is especially wide in the case of the versatile MAG process, which is suitable for unalloyed, low-alloy and high-alloy base metals. This makes it ideal for use in both the production field and for repair welding. The MIG process, on the other hand, is used for aluminium and copper materials.
All in all, then, a highly versatile welding process. |
|
Manual Metal Arc welding, also known as manual electrode welding, is a process with which virtually all metals can be welded. This process is also excellent for outdoor use. Incidentally, most of our MMA machines also permit TIG welding.
Manual electrode welding is a very widely practised and easy-to-use welding process. |
|
Powerful plasma welding machine for maximun weld seam quality
Precise, high stability plasma arc for targeted and concentrated heat feeding
High welding speeds, deeper fusion penetration, low material distortion
Consistent results thanks to the separate inverter for the pilot arc current
Optimum protection of the plasma welding torch from the integrated coolant flow monitor |
|
EFD presents the new ProcessMate 6100 Hot Air Reflow System. This digital bench top reflow system uses an active feedback loop to accurately control air temperature to ± 5ºC. Temperature ranges from 100ºC to 480ºC adjustable in 1ºC increments. The diaphragm pump provides an adjustable, repeatable, constant air flow.
When used with EFD SolderPlus® dispensing solder paste, the ProcessMate 6100 reduces operator variability, rework and scrap while increasing productivity and production yields without special training requirements typical of wire-and-iron soldering. The precise temperature and air flow control allows for a larger process window for reflow without overheating components. Operators are able to visually observe solder being reflowed to prevent common soldering defects. |
|
Horizontal, vertical, diagonal. This tried and tested semi-automatic welding machine can be used universally. The increased welding speed compared with hand welding gives rise to higher productivity.
• Overlap welding of PVC-P, ECB, EPDM, CSPE and TPO roofing membranes
• Faster and more efficient than hand welding
• Small and compact
• Steplessly adjustable speed for high welding seam quality
• Can be used in the most confined spaces
• Different welding seam widths
|
|
GMAW MIG/MAG is a rewarding welding method to automate. At ESAB we have many years experience of this and over the years we have been the forerunner within robot welding as well as other applications. Our program for automated GMAW MIG/MAG consists of everything from the simple welding tractor that holds the welding pistol for the welder, during long, tiring welding work, up to fully automatic welding applications.
|
|
| The Universal Bug-o-matic is a light weight compact unit which combines a powerful drive and precision oscillator all in one housing. This machine works in all positions and can be used for vertical and overhead welds. By simply changing the carriage, the unit can work on rigid rail, semi-flex rail, hi-flex rail or complete ring rails. |
|
Welding duty cycle, depending on application
Nelweld 4000
ø 22 mm - 4 per min.
ø 5 mm - unlimited
Nelweld 5000
ø 25 mm - 5 per min.
ø 8 mm - unlimited
Nelweld 6000
ø 25 mm - 10 per min.
ø 10 mm - unlimited |
|
The latest generation of welding equipment can be programmed with specific process preferences of your individual choice or for the actual welding processes. Based on a solid state power source, it weighs just 1/80 of the 70 year old ancestors but has more power. Our different plasma cutting equipment enables you to quickly and accurately cut all types of metals.
|
|
The main advantage of Tungsten Inert Gas welding is the huge range of different materials that it can be used to weld. These materials can be welded from thicknesses of only 0.6 mm upwards, and include unalloyed and alloyed steels, aluminium, magnesium, copper, grey cast iron, bronze, nickel, silver, titanium, lead and many others beside.
The principal area of use is for welding thin and medium thicknesses of material, and for welding root passes on joints with thicker cross-sections. |
|
K1297 AC/DC 225/125
The AC/DC 225/125 is the deluxe version of the world renowned AC-225 arc welder. It uses the same traditional design of the AC-225, but adds the smoother, more stable DC welding arc. Ideal for farm, shop, and home use where improved arc welding performance is desired.
The AC/DC 225/125 is an arc welding power source with an AC welding output range of 40-225 amps and a DC welding output range of 30-125 amps. It is an extremely useful stick welding power source for maintenance repair, fabrication, construction, erecting and hardfacing applications. Also for cutting and piercing holes in steel. |
|
TWECO is the leader in MIG ARC WELDING guns, gun kits and accessories.
MIG GUNS
GOUGING TORCHES
ELECTRODE HOLDERS
GROUND CLAMPS
ROBOTIC/FIXED ARC WELDING |
|
WELDARC 1100
Inverter for stick welding 3-105A
SMALL, LIGHT AND ROBUST
x Performant in light weight and small dimensions
x Easy to use : 1 knob only
x Welding comfort thanks to arc force pre adjusted |
|
2 MACHINES : 320A IN COMPACT OR SEPARATED WIRE FEEDER + 500A IN SEPARATED WIRE FEDER
PERFECT SYNERGY FOR WELDING ALL TYPES OF METALS
NEW ELECTRONICAL CONTROL FULL DIGITAL KONTROL - AUTOMATIC CONTROL OF THE ARC HEIGHT TO CORRECT WIRE LENGHT
TWINPULS TECHNOLOGY (two pulse) FOR A MINIMUM OF PENETRATION TO WELD VERY THIN THICKNESS WITHOUT ANY DISTORTION
x TIPTRONIC : settings and recording a program
x automatic adjustment of parameters
x easy adjustment of arc height and wire feeding speed
TWINPULS TECHNOLOGY
x double pulse
x allows a minimum of penetration when welding very thin thickness without any distorsion - specifically in aluminium
A PERFECT CONTROL OF THE WELDING CYCLE
x No distortion at ignition thanks to an automatic control of wire voltage and arc lenght
x pulsation control in 1000th of seconds
x automatic regulation of the wire lenght according to the arc height
x no endcraters nor distortion at the end of the welding seam
MIG TORCHES POWERTEK
the ELEKTROPULS 340 and 500 units is associated with POWERTEK torches, aircooled or watercooled, in 3 or 4 meters
x adjustment of the arc height and arc power directly on the torch
x recall and record of a program directly on the torch |
|
| Machines for SAW welding in combination with Kjellberg welding power units a wide range of technological solutions for an effective use in the industrial welding production. |
|
MEGA.ARC 250-4 to 300-4
The capacity for continuous remote control adjustment gives you great gains in spacial independence and reproducibility of the weld seam:
Control of the welding energy from the torch with a control potentiometer during welding
Control of the welding energy with up/down switches on the torch during welding
Energieregelung über Handfernregler
Reduction of the welding energy during welding is possible to counteract increasing material heating
Ideal geeignet für Gerüst- oder Kesselarbeiten durch die Fernregelung
Prepared for simple mechanisation as standard
The integrated database contains over 800 individual parameters programmed by welding experts which ensure optimum settings and thus perfect welding results for every application.
The extended digital multiprocessor control has a synergic characteristic curve for all the most important materials such as Steel, Stainless Steel and Aluminium and for various welding wire diameters and types of gas. Even the necessary Hot-Start settings are included in the characteristic.
The high duty cycle of the MEGA.ARC range fulfils the professional requirements for manual and industrial application and for mechanised production.
|
|
A NEW RANGE OF PRODUCT
ROBUSTNESS AN RELIABILITY
EASY TO USE
STEP REGULATION
x ROBUSTNESS AND RELIABILITY
- strong case with large wheels allowing easy moving
- step regulation
x PERFORMANCES
- welding with wire 0.6 to 1.2 mm and up to 1.6 mm in flux cored wire
- 12 steps of voltage regulation for 320 CR3
2x10 steps of voltage regulation for 400 CR3 and CRW3
- burn back and gas postflow pre adjusted
- 2 (320 CR3) and 3 (400 CR3 - 400 CRW3) inductances for better arc characteristics
x TECHNICAL DATA
ELEKTROMIG 320 CR3
mains : 3x400 V 50Hz
max. primary power consumption : 13.7 kVA
gamme de tension : 18.5 to 43.5 V
welding current at 30% : 320 A
welding current at 60% : 240 A
welding current at 100% : 190 A
weight : 96 kg |
|
K2680-1 Precision TIG 225 - Power MIG 140C One-Pak
Industrial Price: 3399.00 (USD)
Lincoln’s Precision TIG® 225 / Power MIG® 140C One-Pak includes everything you need for MIG, TIG and stick welding, making it ideal for general fabrication, automotive/ motorsports, vocational schools, serious hobby work, home projects and repair, sheet metal, farm and small shop welding. And it’s the perfect complement for welders that need TIG, MIG and stick portability in one easy-to-move, easy-to-store package.
Includes:
- Precision TIG 225 Ready-Pak (K2535-1)
- Power MIG 140C (K2471-1)
- Small Wire Feeder Welder Mounting Bracket (K2616-1)
- Dual Cylinder Cart (K2617-1)
- Stick Electrode Holder and Cable (K2374-1) |
|
| MMAW, SAW and MIG/MAG welding units for welding up to 1400 A DC as well Kjellberg welding automats are suitable for manual and mechanised and semi-automated welding processes. |
|
FEATURES:
Rugged power source design
ATC™ Advanced Torch Connection
Supplied with 1Torch SureLok Technology
Initiates pilot arc without HF
Excellent cut speeds & unsurpassed cut quality
Auto pilot restart for easy cutting on metal mesh
Protective interlock circuit saves torch parts
High visibility shield cup
MaximumLife™ electrode improved parts life
Ergonomic torch handle for comfort & control |
|
BOOSTER 140
140 Amps in only 4.9 kg
The new electrode inverter BOOSTER 140 sets new records. The BOOSTER can be used for all welding applications on stainless steels, high and low alloyed steels as well as Copper and its alloys.
Fast Starting stable arc
The increased striking voltage with Hot Start function ensures a stable arc in seconds.
Best welding characteristics
The digital processor control and the highly dynamic power stage with its cycle frequency of 100kHz offer excellent welding characteristics.
Electrode Inverter with high power
No sticking in the weld even with coarse droplet electrodes ? the Arc Force function monitors the welding current and the welding voltage and ensures a sure drop transfer at all times.
No overheating of the electrode
The Anti-Stick function reduces thew elding voltage of the BOOSTER 140 should the electrode accidentally stick and thus prevents overheating.
Simple operation
Just set the welding current suitable for the electrode on the rotary knob and weld!
|
|
|
|
