|
|
|
|
|
|
The AC 530-F convinces our customers in working processes by state-of-the-art control-, drive- and measuring technologies. The AC 530 can be delivered as Fine Grinding, lapping- or polishing machine according to our customer’s requirements.
The AC 530 of the microLine range is a development by Peter Wolters incorporating latest innovations and enhanced features for even more applications. The AC 530 sets standards in fine surface planarization and comes with every advantage of it’s larger sister models of the microLineÒ range. This includes various available levels of automation solutions as well as drives and full wheel cooling options. The machine capacity could also be increased by 15 % through the larger wheel diameters – compared to our AC 500. This delivers additional opportunities for our customers to compete in their markets and to gain higher profits. A lower Cost of Ownership level is provided for through extended service intervals.
In the range of Glass Fine Grinding Peter Wolters machines convince especially in:
· up to 1000 µm/min cut-rate
· extremely high workpiece throughput
· extreme cost saving
· low cost per workpiece
· low contamination problems
· ready-to-polish grinding quality
|
|
|
Fully automated industrial finishing of organic lenses: Polycarbonate, CR39 and High index Allows to process lenses with smaller B measurement. Available with or without drilling.
|
|
High precision laser engraving system for marking ophthalmic progressive lenses. The CO2 laser system is prepared to engrave semi-visible markings on organic lenses. Marks convex and concave surfaces. Desktop system.
|
|
The Centromatic machines center and edge lenses of 10 to 300 mm in diameter – fast, reliable and precise.
The complementary tool geometry permits processing of complex lens shapes (i.e. not-rotatory symmetric contours as well as not round shapes) without tool change – with two spindles (option) even faster.
The Centromatic grows with your demands, extension is easy, because of the modular construction.
|
|
The G-System is the innovative machine design concept enabling to choose the version that meets your specific demands.
Because of its flexible kinematics the G-System machines can process spheres, aspheres, prisms and cylinders.
Two base models are available for different working ranges and applications. The GI processes lenses Ø 40 – 500 mm and prisms with a maximum eveloping circle of 310 mm. The GII processes lenses Ø 20 – 120 mm. Both versions can be equipped with 1 or 2 tool/workpiece spindles, automatic loading system and automatic tool changer. Process steps available are pre- and fine generating, edging, two-side complete processing. The processing methods are: aspherical processing with tool lip or tool cylinder, shapes and centering with tool lip or tool cylinder and single or bath prism production.
|
|
Efficient production of spheres, aspheres and more.
Application:
After the very successful LOH Spheronorm 50-and 120-series, Satisloh engineers now developed the next generation platform for the production of lenses and more up to 60 mm in diameter, or even higher depending on the lens design. SPM 60 and SPS 60 stand for an innovative, modular system platform, enabling application specific grinder and polisher variants.
The revolutionary 360° multi-functional swivel head with 2-tool spindle technology, the ultra-compact polymer concrete base, and the large working range of the inductive linear axis motor result in a new level of performance in working speed, performance and process stability.
|
|
The fully automated VFT-orbit generator is a friction free air-bearing system combined with Circumvolution Technology, high performance
control system and proprietary fast-tool technology enable exceptionally accurate and wave-free surface quality, ideal for fast form-conserving polishing.
|
|
|
Superior performance-to-cost ratio, high performance fast tool generating for soft tool polishing, provides outstanding surface quality and form accuracy.
|
|
|
Fully automated polishing system with large tool magazine and lens cleaning system. Auto-FLEX ejects used tools when life time is exceeded. High yields, no lens damage: gripper takes lens without touching the polished and pre-cleaned surface
|
|
|
Fully automatic single station prismatic alloy blocker for semi-finished lenses. Automatic conveying of job trays via conveyor belt. Lens recognition system for precise alignment of lenses (recognizes type, position and height). Recognizes most available progressive lenses and is equipped with a self learn mode for new lenses. Blocking chucks recognition system.
|
|
|
Fully automated system for applying protective tape to semi-finished lenses. Job trays are automatically conveyed via conveyor belt.
|
|
Full-automatic NC Centering Machine
- Ready for various types of workpieces with changing production amount 80% savings on Preparation Work!!
- Double productivity by application of twin manufacturing axes!!
- Simple preparation work by NC control with no need of extra skills!!
- Only small space required! Robot & stocker combined!!
- Manufacturing size from Ø2mm to 20mm (Even up to Ø30mm with some restriction)
|
|
| ... products without technical information |
| |
|
|
|
|
The AC 530-F convinces our customers in working processes by state-of-the-art control-, drive- and measuring technologies. The AC 530 can be delivered as Fine Grinding, lapping- or polishing machine according to our customer’s requirements.
The AC 530 of the microLine range is a development by Peter Wolters incorporating latest innovations and enhanced features for even more applications. The AC 530 sets standards in fine surface planarization and comes with every advantage of it’s larger sister models of the microLineÒ range. This includes various available levels of automation solutions as well as drives and full wheel cooling options. The machine capacity could also be increased by 15 % through the larger wheel diameters – compared to our AC 500. This delivers additional opportunities for our customers to compete in their markets and to gain higher profits. A lower Cost of Ownership level is provided for through extended service intervals.
In the range of Glass Fine Grinding Peter Wolters machines convince especially in:
· up to 1000 µm/min cut-rate
· extremely high workpiece throughput
· extreme cost saving
· low cost per workpiece
· low contamination problems
· ready-to-polish grinding quality
|
|
Efficient production of spheres, aspheres and more.
Application:
After the very successful LOH Spheronorm 50-and 120-series, Satisloh engineers now developed the next generation platform for the production of lenses and more up to 60 mm in diameter, or even higher depending on the lens design. SPM 60 and SPS 60 stand for an innovative, modular system platform, enabling application specific grinder and polisher variants.
The revolutionary 360° multi-functional swivel head with 2-tool spindle technology, the ultra-compact polymer concrete base, and the large working range of the inductive linear axis motor result in a new level of performance in working speed, performance and process stability.
|
|
|
Fully automated polishing system with large tool magazine and lens cleaning system. Auto-FLEX ejects used tools when life time is exceeded. High yields, no lens damage: gripper takes lens without touching the polished and pre-cleaned surface
|
|
| ... products without technical information |
| |
State of the art technology, working pressure achieved within 4 minutes, consistent uniform coatings – even on curved substrates, optimized deposition processes for different substrates, high deposition rates.
Based on many years of thin-film experience this sputtering system the SP-100 reflects the state of the art in precision pulse plasma sputtering technology. The single-target, reactive sputtering principle provides outstanding flexibility for process innovation and simplified operation.
|
|
|
The MC-380-H is a stand alone AR Box coater or - combined with an ultrasonic cleaning system - a complete coating solution. It offers consistent sophisticated AR coatings in short process times with an easy process setup.
|
|
High volume vacuum Box Coater.
The 1200-DLF Box Coater deposits anti-reflective (AR) and / or mirror coatings on organic and mineral glass lenses via thermal evaporation process. It offers multiple process applications. This machine is built for highest throughput requirements in Rx-Lab and stock lens production.
|
|
High precision laser engraving system for marking ophthalmic progressive lenses. The CO2 laser system is prepared to engrave semi-visible markings on organic lenses. Marks convex and concave surfaces. Desktop system.
|
|
The Centromatic machines center and edge lenses of 10 to 300 mm in diameter – fast, reliable and precise.
The complementary tool geometry permits processing of complex lens shapes (i.e. not-rotatory symmetric contours as well as not round shapes) without tool change – with two spindles (option) even faster.
The Centromatic grows with your demands, extension is easy, because of the modular construction.
|
|
Ultra-high resolution microscopy places special demands on the equipment used to capture new information and reveal the secrets of the Nano-world.
The new S-5500 meets these with proven technology, combining high resolution and easy, reliable operation.
The S-5500 boasts a host of features and details, all designed to make high resolution microscopy and analysis that much easier
|
|
1 / 1 - KOMBI 48/12 A
A washing plant which uses aqueous solutions activated by ultrasound, and rinsing on carbon and mixed resin bed columns. Drying is carried out with hot air in a tunnel type oven. The plant is completely carinated.
The baskets handling system is completely automatic and is managed by a PLC which is easy to program using the tactile screen.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
|
|
see the results for the following category : 
