|
|
|
|
|
|
The AC 530-F convinces our customers in working processes by state-of-the-art control-, drive- and measuring technologies. The AC 530 can be delivered as Fine Grinding, lapping- or polishing machine according to our customer’s requirements.
The AC 530 of the microLine range is a development by Peter Wolters incorporating latest innovations and enhanced features for even more applications. The AC 530 sets standards in fine surface planarization and comes with every advantage of it’s larger sister models of the microLineÒ range. This includes various available levels of automation solutions as well as drives and full wheel cooling options. The machine capacity could also be increased by 15 % through the larger wheel diameters – compared to our AC 500. This delivers additional opportunities for our customers to compete in their markets and to gain higher profits. A lower Cost of Ownership level is provided for through extended service intervals.
In the range of Glass Fine Grinding Peter Wolters machines convince especially in:
· up to 1000 µm/min cut-rate
· extremely high workpiece throughput
· extreme cost saving
· low cost per workpiece
· low contamination problems
· ready-to-polish grinding quality
|
|
For over 50 years, Lapmaster has served the precision optics industry through innovative design and manufacture of high-quality precision finishing systems and solutions. Our equipment and expertise is well known throughout the industry and serves some of the most demanding optics & electro-optics labs worldwide.
Lapmaster’s diverse industry experience and extensive application knowledge facilitates the development of custom-engineered optics finishing solutions capable of delivering the most precise, repeatable results. An integral component of our ongoing commitment towards progressive optical pitch polishing innovations is to provide custom solutions taliored specifically for each of our customers' unique applications.
|
|
Efficient production of spheres, aspheres and more.
Application:
After the very successful LOH Spheronorm 50-and 120-series, Satisloh engineers now developed the next generation platform for the production of lenses and more up to 60 mm in diameter, or even higher depending on the lens design. SPM 60 and SPS 60 stand for an innovative, modular system platform, enabling application specific grinder and polisher variants.
The revolutionary 360° multi-functional swivel head with 2-tool spindle technology, the ultra-compact polymer concrete base, and the large working range of the inductive linear axis motor result in a new level of performance in working speed, performance and process stability.
|
|
|
Fully automated polishing system with large tool magazine and lens cleaning system. Auto-FLEX ejects used tools when life time is exceeded. High yields, no lens damage: gripper takes lens without touching the polished and pre-cleaned surface
|
|
|
Cost-efficient ploishing machine with 4 axes, for plano, spherical (convex and concave) polishing. Materials: glass, ceramics, crystals and similar materials
|
|
| ... products without technical information |
| |
|
|
|
|
Centerless grinding and polishing maschine typ RP S 376
A new technical development for high speed grinding has now been successfully proven at Company Thyssen Krupp Elevator.
Stock removal grinding and finishing in one pass to final tolerance on DOM Tube. Heavy removal rates which eliminate the pre-turning on large cylinders over 6” ( 150 mm ). Stock removal of 1,4 mm with high speeds of 4m/min on tubes over 200 mm diameter possible
LOESER centerless grinding machines made with single- and multistation grinding heads (swivel joint technology) are used in the tube, pipe and bar industry, automotive industry, hydraulic industry and many others. surface improvement up to ra = 0,01 micron can be achieved easily. diameter starting with 1.3 mm up to 500 mm can be finished with through feed speed up to 30 m/min. depending on the workpiece. various workpiece length of 20 mm up to 20 m can be surface improved by grinding, brushing, polishing or deburring. automatic operation of the machines combined with magazines or in automatic production lines reduce the handling costs of parts. easy operation and quick belt change systems reduce the downtime. pneumatic grinding pressure control insure consistant quality.
|
|
High performance grinding and polishing machine for tubes, with high versatily, working with abrasives belt. Used in the tubes, pipe and bars production to improve the cosmetic or surface carchteristics.
Workable dimensions length from 1MT up to 12MT and diameters 10mm up to 150 mm,220 mm and 300 mm. Are also avaiable special version for smaller diameters.
For greater diametercould be interesting check the STO machine.
The machine can be completely automated and controlled by PLC software.
Grinding pressure is constantly monitored to keep an high quality level
This machine is perfect to be installed in line with the mirror polishing machine model PT 150 If you need a really superfinishing solution please discover our STL model for longitudinal polishing.
For small shops and and fabricators the most perfect solutions is our combo unit model STP with possibility of making on the same unit both satin finishing and stock removal and polishing and buffing.
|
|
| ... products without technical information |
| |
|
|
|
|
New cross section polisher from JEOL allows observation of multi-layer structures, interfaces, composites of soft and hard materials, polymers, powder grains, and crystalline structures of metals and ceramics with few artifacts. In a single step, clean, polished samples are produced and for analysis. The CP uses an argon ion beam to prepare up to 11mm(W) x 10mm(D) x 2mm(H) samples of soft or hard materials while preserving internal structures, voids between interfaces, adhesions between layers, and precipitates. Unlike conventional mechanical polishers, the CP minimizes deformation of the polished surface, enabling clear observation of crystalline structures.
The high power optical microscope in the JEOL CP allows the user to position a sample to within a few microns of the cross section position. During milling, the sample is rocked automatically to avoid creating beam striations on the cross sectioned surface. Due to the glancing incidence of the ion beam, argon is not implanted into the sample surface.
|
|
| ... products without technical information |
| |
|
|
|
|
High Speed Cutting and Jig Grinding with very high precision in one machine
Simple programming of the machining cycles for jig grinding
Grinding technology fully integrated (contact measurement of the abrasive pin, dressing spindle, grinding oil, CO2 extinguishing system etc.)
High precision of machine due to combined use of linear motors and absolutely friction-free hydrostatic guides in all axes
Maximum feed rate and acceleration limited to achieve highest possible precision
Outstanding damping characteristics due to hydrostatic system oil film in all axes
Friction-free counterbalance in the Z-axis
Extremely rigid machine construction, 11 t weight
Three-point support, damping machine feet
Precise control of all temperatures in the machine, including the cooling water, the oil for the hydrostatics and the oil for the machining, cooling of motors and secondary magnetic elements, extra cooling housing for spindle
Cabin completely closed, includes noise reduction and large windows with security glass, loading with crane possible
Infrared touch probe for work piece set up and 3D measurement of the contour
Chip disposal via 2 spiral conveyors into chip box behind the machine
|
|
|
|
|
|
PETER WOLTERS is a world leading manufacturer of high precision machine tools for individual applications in fine grinding, honing, lapping and polishing of flat workpieces. The product range is completed by combined grinding and brush deburring systems. which have been developed for the final surface optimisation of fine ground, fine blanked and stamped workpieces as well as special precision parts with defined edge radiusing.
The FE 700 L system is indicated by the following features:
·The linear finishing system FE 700 L is available as a stand – alone application as well as a fully automatic application combined with an PETER WOLTERS AC microLine® machine.
·The basic machine is equipped with a special sealing system between the drive/control section and the work section. Due to this fact the maintenance intervals, maintenance times and set-up costs are minimized.
·Options like the fully automatic tool wear and pressure control guarantee a constant process quality at a high level.
·Further options as automatic loading, flip over device and unloading systems are available. Also part of this is a central adjusting device which ensures short change over times for other workpiece dimension.
|
|
Fladder Deburring System
- Is an innovative deburring method based on principles which are fundamentally different from those of traditional methods.
Zinc plated, electroplated, parts with a cladding or stainless steel pieces with a protective plactic foil can be done without critical damage to the layer.
|
|
|
|
|
|
|
Vector Series abrasive flow machines have been redesigned through a joint effort between Extrude Hone Corporation and its customers. Over three hundred existing machine customers were contacted to provide input concerning a new machine design. The customers were asked for suggestions concerning machine operation, ease of maintenance, ergonomics and safety. The result is an extremely flexible Vector Series that is capable of polishing large extrusion and forming dies, multiple workpieces at one time and production deburring. The working tabletop has been lowered and enlarged, to accommodate bulky and heavy components. The abrasive media cylinders can be provided in sizes ranging from 4 inch diameter to 12 inch diameter. The Vector and the Vector HP offer a choice of pressure ranges to meet specific production requirements. Another standard feature on the Vector Series is the touch screen operator interface terminal which simplifies all machine functions in both an automatic or manual mode. This machine can also be ordered with optional flow control.
|
|
At the Heart of Extrude Hone
Extrude Hone patented the Abrasive Flow Machining (AFM) process in the 1960's as a method to deburr, polish and radius difficult-to-reach surfaces.
The typical AFM process (two-way flow) uses two vertically opposed cylinders which extrude an abrasive media back and forth through passages formed by the workpiece and tooling. Abrasive action occurs wherever the media enters and passes through the most restrictive passages. The extrusion pressure is controlled between 7-200 bar (100-3,000 psi), as well as the displacement per stroke and the number of reciprocating cycles.
One-way AFM systems flow the abrasive media through the workpiece in only one direction, allowing the media to exit freely from the part for fast processing, easy cleaning and simple quick-exchange tooling.
|
|
| ... products without technical information |
| |
The Multi Surface Machine is an extremely dependable as well as powerful 115V floor machine. The ConcreteMedic® Multi Surface Machine is designed to work in both dry and wet applications. It is powered by severe duty Leeson, 180 frame, totally enclosed motor. The totally enclosed motor is ideal for the harshest conditions--dust, moisture, chemicals--and great for concrete work.
The Multi Surface Machine is specifically designed to make small jobs highly profitable. Along with the rugged motor, it features a removable weight system and is available in 17" or 20" sizes. This system is manufactured in the USA.
|
|
|
|
see the results for the following category : 
