|
|
The new horizontal machine series for the operators with complex demands - starting immediately, the complete DMC H series is available in duoBLOCK® design. This horizontal machine series from DECKEL MAHO offers users custom-tailored machine configurations, from performance milling with linear drives to maximum feed power for high-volume machining.
|
|
|
|
|
|
ModuFix®-CNC machines are built modular, with high operating comfort for a variety of tasks and applications at an ideal price/performance ratio.
The basis is a frame with an x/y/z-unit with linear motors as well as a integrated control cabinet, monitor, touch screen and a keyboard.
ModuFix®-CNC machines are available as compact units in 4 standard sizes:
ModuFix® 10D
X/Y/Z 600x350x150
ModuFix® 15D
X/Y/Z 1100x350x150
ModuFix® 150D
X/Y/Z 1000x650x150
ModuFix® 200D
X/Y/Z 1500x650x150
The x / y / z-unit can be individual used for all assembling, machining and testing tasks.
This affordable machine concept allows you maximum flexibility in production with very short amortisation time.
ModuFix®-CNC machines are according to the use, with stepper motors (series P) and servo motors (series V) and mixed (combination of servo + direct) available.
ModuFix®-CNC machines have a multitude of use, e.g. for:
* Test and test set-ups of any type
* CNC-Technology (didactics) for training and occupational field
* Flexible manufacturing technology
Applications
ModuFix®-CNC-maschines serves as the basic equipment for test and test set-ups as well as CNC technology for:
* Drilling and milling
* Assembling and mounting
* Imprinting and engraving
* Metering and Fastening
* Buring and polishing
* Bonding and casting
* Soldering and welding
* Measuring and testing
* Scanning
... etc.
|
|
MX FLOOR TYPE MILLING MACHINE (LINEAR GUIDES)
SYMMETRIC COLUMN WITH CENTERED HEADSTOCK GUIDED ON THE FRONT & REAR SIDE
RAM DROP COMPENSATION SYSTEM
RAM GUIDED ON 4 LINEAR GUIDES
FEEDS : 25 M/MIN
TRAVELS : X=4.000-30.000 mm Y=2.000-4.500mm Z=1.300-1.500-1.650mm
HORIZONTAL BORING HEAD
UNIVERSAL HEAD 2,5ºx2,5º/1ºx1º/0,1ºx0,1º - 37 KW - 5.000/24.000 RPM
TWIST HEAD 2 CONTINUOUS AXES 0,001º: A +/-105º C +/- 185º 5.000/24.000 RPM ( MECHANICAL & ELECTROSPINDLE HEADS )
ATC TOOL CHANGER : 20-120 TOOLS
AAC PICK UP STATION : 2-6 ATTACHMENTS
ROTARY TABLES : 6-120 TONS 1000x1000 mm UP TO 4.000x5.000 mm
|
|
Series GFV/GFY
X/Y/Z CNC Base Units
Series GFV / GFY
Effective travel ranges: from 440 x 480 mm to 1,380 x 2,480 mm, z-axis 220 or 300 mm
Clamping surface: from 625 x 1,100 mm to 1,500 x 3,050 mm
Portal passage: optionally 235 mm or 435 mm
Drive system: DC (series GFV) or AC (series GFY) servo drives, precision ball screw spindle
Travel speeds: 8 m/min (series GFV); 12 m/min (series GFY)
Repeatability depending: on the assembly of the plants; on average approx. 0.02 mm
Weight: 450 kg to 650 kg
Example of use
All linear axes of the linear units LES 5 (x- and z-axis) and LES 6 (y-axis) that are use here run on grinded steel shafts with linear ball bearings. Clearance-free ball screw drives with hardened and polished 5/8''-16 spindles with a pitch of, optionally, 2.5/4/5 or 10 mm are used as drives. The linear axes are driven by powerful and robust DC or AC servo motors in easy-to-maintain drive modules.
|
|
|
|
|
|
The D.L. Ricci Corp. "3 axis" Portable Milling Machines are our most versatile and accurate milling machine tool, capable of traveling and machining in all axis (XYZ). They are ideal for onsite machining large and small rectangular areas accurately. These Portable Mills can be clamped or bolted directly onto the part being machined or fabricated. Setup jigs and parallel-mounting fixtures can be used to position the portable mills for difficult work area conditions. Any machinist familiar with machining practices will find the Portable Milling Machines simple to setup and operate, even upside down.
These milling machine tools are designed for rugged onsite machining such as milling, drilling and boring applications on jobs that were previously thought to be impossible without extensive disassembly. The precision ground dovetails with adjustable gibs, to provide smooth, accurate travel in all axis.
When used as a facing mill, this milling machine tool will do a quick job of facing off pitted or misaligned surfaces, restoring the original condition of the part being machined. Servo power feeds are available for all axis, allowing the application of smooth and consistent power feed throughout the speed range, both in forward and reverse.
|
|
Ronin
One of the most important characteristics of RONIN is that of integrating the column in a unique monolithic structure with the longitudinal sliding saddle (X axis).
The result is exciting under all points of view. RONIN differs itself from all competing machines for its qualities of utmost stiffness, of dynamic feedback, for its capabilities to perform extremely heavy machining with high powers, high accuracy machining, as well as for its finishing quality.
|
|
|
|
|
|
The range of the Vertical Milling machines is composed from :
Atlas 2G
is a milling machine with travelling portal (Gantry) and stationary or travelling working crossrail. Hydrostatic lubrication on all axes.
Milling head with built-in "C" axis suitable for different attachment heads
Atlas 2P
is a milling machine with movable table and stationary portal, with movable or stationary working crossrail and hydrostatic bearing on all the axes.
Milling head with built-in "C" axis suitable for different attachment heads
Atlas 3RG
is a milling machine with travelling portal (Gantry) and stationary or travelling working crossrail, featured by closed RAM. Hydrostatic lubrication on all axes.
Atlas 3RP
is a milling machine with movable table and stationary portal, with movable or stationary working crossrail, hydrostatic bearing on all the axes and fully closed ram
Atlas 4RP
is a milling machine with travelling portal (Gantry) and stationary or travelling working crossrail, featured by closed RAM.
Atlas 4RG
is a milling machine with travelling portal (Gantry) and stationary or travelling working crossrail, featured by closed RAM
|
|
A modern machine with 5 NC-axes for parts of medium weight up to 6 tons and a working envelope of 2.5 x 2 x 1.2 m erected on an even foundation and featuring performance parameters to meet highest demands in metalworking industry.
The all-around enclosure permits a diameter of rotation of work pieces to be cut of 2200 mm. Chip and coolant discharge facilities are arranged above floor level. Automatic tool and pallet changers sustain universal application of machine as a machining center.
Comprehensive accessories such as various milling heads, NC facing heads and support bearings that can also be changed automatically are to enhance the universal application of this UNION machine.
|
|
K2X The machines of Extremes
Very high speed and very high precision in 3D-machining.
Precursor of the very high HSM range, the structural calculations have lead to a very high-performance machine : feedrates and working speed up to 60 m/mn and acceleration up to 1g ; powerfull spindle which allows high swarf removal.
Rapidity and power are the best describing the HURON K2X. It allies swarf removal capacity and high machining speeds for 3D-finishing operations.
Milling centres type K2X have a high stability for machining the hardest materiel (machining in 65 Hrc steel have been made).
This milling centre is ideally suited for pieces up to 3000 kg such as injection moulds, foundry templates, cutting tools, aeronautical pieces, precision mechanical parts.
K2X 8
XYZ 700 / 600 / 450 mm
800 x 600 mm / 500 kg
24.000 rpm - 24 kW - 38 Nm
XYZ = 40 m/min
|
|
Drake GS:RM™Heavy Duty Rack Mills
The Drake GS:RM (Gear System: Rack Mill) produces steering racks for a major automotive manufacturer. Cycle time is less than 35 seconds. Its performance earned an overall perfect ten rating from the auto parts maker.
This four-axis machine features a customized automatic loading system designed to use specific alignment features that assure accurate, quick, repeatable loading. High-powered table vice clamps secure the part and feed jaws accommodate two part configurations with no changeovers required.
An available power helix on the milling spindle assists in fast changeovers to a variety of part configurations producing angles up to plus or minus forty-five degrees.
|
|
PD4
COPY ROUTING MACHINE
Copy routing machine model LISI PD 4 for the drilling of PVC and aluminium sections. Vertical and horizontal milling motor. Horizontal three-spindle milling head that bores the three holes of the handle into the section and into the backing in one single operation. (Horizontal motor 900 RPM.) Two horizontal pneumatic clamps system ensuring perfect section positioning. Vertical stroke 130 mm. Width stroke 190 mm. Horizontal stroke 350 mm.
|
|
Stress Relieved and Annealed GA50 Meehanite Castings
Rigid Honeycomb Wall Column Construction
AC Inverter Spindle Drive
High Torque 8:1 Back Gear
Micrometer Stop for Quick Depth Setting of Quill
Halogen Work Lamp
Automatic Lubrication System
Double Lock Device for Axes
Precision Ground Table Surface
Hardened & Ground Way Surfaces with Turcite B
Dovetail Way Surface for X Axis
Square Box Ways for Y Axis and Knee
Internal Knee Rapid Feed Motor
Adjustable Double Nut Design for Minimal Backlash
Chrome Plated Precision Ground Quill
Induction Hardened & Ground Splined Spindle Shaft
|
|
Laboratory Milling Machine, Model 160
For removing the work-hardened edges of tensile test specimens after blanking. The tensile test specimens are clamped individually of in packs into a milling fixture, then both sides are guided past the milling cutter. The result is a favourable parallelism in the measuring zone of the tensile test bar. The speed of the milling cutter is infinitely variable and can be preset between approx. 4,000 - 8,000 min-1 achieving an optimal cutting speed appropriate to the material.
|
|
|
The HSM 600 ProdMod is a high speed machine for use in production. The HSM tried and tested basic machine is used as the base which captivates by virtue of its dynamics, compactness, version variety and ergonomics. ProdMod's configuration additionally offers a tool storage tower which is scaleable for 120, 170 or 220 tool positions. A machine cover with chip rinsing nozzles as well as different configurations with regard to chip conveyors and coolant preparation systems. In addition to the Mikron pallet changers there is also an interface available for connecting other robots.
|
|
CNC BED TYPE HORIZONTAL AND VERTICAL MILLING MACHINE
STANDARD
MODEL 20 KF
- Centralized control panel.
- Digital numerical Control.
- Push-button panel with electronic handwheel.
- Ball screws with double preloaded nut.
- Counterweight with direct hydraulic cylinder in vertical movement.
- The three movements guided with preloaded roller packs over hardened and ground steel guideways.
- Hydromechanical tool clamping.
- 45º head, manual rotations.
- Spindle orientation.
- Spindle taper: ISO 50.
- Hydraulic unit.
- Automatic lubrication.
- Electrical cabinet , with temperature conditioner.
- Coolant equipment, tank 160 l, 60 l/min - 2,5 bar. (*)
- Protections.
|
|
The F1 Travelling-Column Miller addresses to customers who want to combine the size of a boring mill with the universal and dynamical features of an up-to-date miller. This machine is of particular interest for manufacturers of one-offs or small batches thanks to the possibility of five-sided cutting in one setup, associated with high machine dynamics and precision.
- Five-sided cutting in one setup thanks to the use of various milling heads, automatically changeable on request
- High machine dynamics because of rapid feed rates up to 40 m/min and axis acceleration rates up to 5,5 m/s2
- Spindle speed of milling heads up to 5000 rpm
- Sturdy and rigid ram with combined sliding/ antifriction guideways
- Sagging compensation of ram, hydraulically adjustable
- Stand-alone or travelling tool magazine in various configurations of 24 to 240 pockets
- Central arrangement of all service units at one location only
|
|
CNC MOVING COLUMN WITH FIXED TABLE-BED HORIZONTAL AND VERTICAL MILLING MACHINE
HIGH PERFORMANCE
MODEL KMC-AR
- Centralized control panel.
- Digital numerical control.
- Push-button panel with electronic handwheel.
- Rack and double motor and pinion in longitudinal movement.
- Ball screws in cross and vertical movements.
- Counterweight with direct hydraulic cylinder in vertical movement.
- The three movement guided with preloaded roller packs over hardened and ground steel guideways.
- Hydromechanical tool clamping.
- 45º head, manual rotations.
- Hydraulic unit.
- Automatic lubrication.
- Electrical cabinet, with temperature conditioner.
- Protections:
- Screen with doors (at the front and lateral sides)
- Fences (at the back part)
|
|
FV 340 CN:
FV 340 with numerical control
Strockes: 1070 x 350 x 490 mm
High capacities and ease of use for a very close work by the piece...
- Continuous variation of spindle and feed speeds. Digital display of the speeds on movable console.
- Visualization on the 3 movements par rulers, increment 1 / 100 mm. Prismatic tracks on the 3 movements.
- 2 distinct spindles, horizontal and vertical, with each an independant motor.
- 2 gear box 2 ranges on the 2 spindles.
- Vertical head, with sliding drilling quill of very large diametre (130 mm) making feasible slanted drilling (slant + or – 45°). Easy and precise orientation of the head thanks to a wheel and an endless screw.
- Ram moving up to 680 mm thanks to a rack.
- Cast-iron structure fonte to ensure high rigidity and maximal accuracy.
- Electric control of automatics with 3 levers.
- Centralized automatic lubrification system for all movements.
|
|
The milling trade-mark of CAZENEUVE. User-orientated machines. They also supply DUFOUR spare parts.
With the FV range, you can have conventional or CN drilling machines adapted to small or mass production and supplied with a complete accessory kit.
|
|
Numerical milling machine 3 axes covering of the races of 300x210x100mm and, conceived for the tender material machining such as the resins, wood, the plastics, aluminum as well as brass.
This milling machine is compatible with many software or programmable ISO codes some.
|
|
LC-205 VS / LC-205 VN / LC-205 VSD
Travel
Longitudinal Travel 815 mm (32")
Cross Travel 380 mm (15")
Vertical Travel 460 mm (18")
Table
Working Surface 1,300 mm X 260 mm (51" X 10") / Opt: 1,420mm (56")
Working surface to ground A01 935 - 1,395 mm (36.8 - 54.9")
Max. Loading 200 Kg
T-Slot (no. x width x pitch) 3 X 15.875 mm X 63.5 mm
|
|
LC-20 VSG / LC-20 VGN / LC-20 VGA
Travel
Longitudinal Travel 800 mm (32.5") / Opt: 920mm (36.2")
Cross Travel 415 mm (16.3")
Vertical Travel 460 mm (18")
Table
Working Surface 1,300 mm X 260 mm (51" X 10") / Opt: 1,420mm (56")
Working surface to ground A01 910 - 1,370 mm (35.8 - 53.9")
Max. Loading 200 Kg
T-Slot (no. x width x pitch) 3 X 15.875 mm X 63.5 mm (3 X 0.625" X 2.5")
|
|
LC-185 Series
Travel
Longitudinal Travel 790 mm (31") / Opt: 890 mm (35"); 990 mm (39")
Cross Travel 415 mm (16.3")
Vertical Travel 390 mm (15.3")
Table
Working Surface 1,270 mm X 254 mm (50" X 10")
Working surface to ground A01 980 - 1,370 mm (38.6 - 54")
Max. Loading 200 Kg
T-Slot (no. x width x pitch) 3 X 15.875 mm X 63.5 mm (3 X 0.625" X 2.5")
|
|
SPINDLE
Spindle taper: R8(NST30)
Spindle speeds: 60-4200 RPM (Varialbe)
Quill diameter: 85.725mm(3.37)
Quill travel: 127mm(5)
Spindle motor: 3HP
TABLE
Table size: 1270x254mm (50x10)
Longitudinal travel(X): 800mm(31.5)
Cross travel(Y): 380mm(15)
Vertical trave(Z): 406mm(16)
T-solt(width x trough number x pitch): 16mmx3x65mm
RAM
Machine weight: 1400Kgs (3080 lbs)
Machine dimension(L x W x H): 1750x1700x2270mm
Packing dimension: 1800x1600x2400mm
|
|
High-speed Vertical Milling Machine
Toshiba Machine Machinery's policy is to apply the latest and most advanced engineering technologies in the design and manufacturing of their products. Producing everything from start to finish, from the castings to the control systems, Toshiba Machine supplies high-quality machines to such industries as the aerospace, heavy-electrical equipment, automotive, nuclear-power, electronics and other industries where high precision is a prerequisite.
|
|
|
Based on the concept of reliability, the model FP adds to the typical characteristics of the bridge design an exceptional strength and versatility thanks to its over-sized structure, hardened and ground slideways and numerous optional features available. The result is an homogeneous machine that ensures rigidity, damping capacity and accuracy.
|
|
Numerical milling machine 3 axes, covering races of 600x500x100mm and, conceived for the tender material machining such as the resins, wood, the plastics, aluminum as well as brass.
This milling machine is compatible with many software or programmable ISO codes some.
|
|
|
|
