|
|
| CERBEC balls are known worldwide for their extremely smooth surface finish. Our manufacturing process is totally dedicated to Si3N4 finishing. This focus yields surface finish typically < 0.10 micro inch (< 0.003 micron) consistently from batch to batch for the tens of millions of balls we produce annually. Reduced bearing friction from Si3N4 is a function of smooth surface finish - it must be done right all at the time. CERBEC balls have over 10 years' history of superior surface finish. |
|
| ... products without technical information |
| |
Noliac's Ceramic Multilayer Benders products are based on the company's advanced multilayer technology, harnessing the full potential of the piezoelectric effect at very low operating voltages.
Multilayer piezoelectric benders are single co-fired ceramic components with ceramic layers and internal electrodes configured as to generate a bending mode.
The most common bender geometry is a narrow rectangle (CMBP) with typical performance range up to +/- 1500µm stroke and up to 10N blocking force.
Noliac has also developed a unique ring shape bender (CMBR) with typical performances range up to +/- 150µm and up to 100N blocking force.
Multilayer benders are used in numerous applications within e.g. optics, telecommunication, instrumentation, automotive, valves. |
|
Actuators, shear plates (CSAP)
Noliac's line of ceramic shear actuator plates (CSAP) is based on the Noliac Group's advanced piezo technology.
Based on the piezoelectric shear mode, Noliac's shear actuators can be made more compact and have higher resonant frequencies than conventional piezo actuators. In addition, their low capacitance results in reduced power requirements for a given generated displacement in dynamic operation.
Shear actuators are used in numerous applications within e.g. nanopositioning, precision mechanics, active vibration cancellation, semiconductor manufacturing and testing. |
|
Argweld® Weld Backing Tape
Glass fibre weld backing tape.
The tape would ideally be used for:
One-sided welding of weldable metal.
To achieve a flatter, smooth, coke free weld bead to minimise the need for post-weld grinding and cleaning.
Common metals welded with 'Backing Tape' include:
carbon steels
stainless steel
chrome-moly and duplex steels
copper nickel
cast iron
The tape comprises a 75 mm wide, heat resistant aluminium sticky tape, in the centre of which is a 25 mm wide band of woven glass fibre cloth.
The material is available in two grades:
Standard 80 amp Light duty for use up to 80 amps
Heavy Duty 160 amp Heavy duty for use up to 160 amps
It is possible to weld onto the tape with MIG, Stick, TIG or plasma processes, so long as the recommended current levels are not exceeded.
The lightweight grade comes in 25 metre lengths and the heavyweight in 12.5 meter lengths.
If lengths are needed to be joined, rolls of the sticky aluminium tape without the fiber are available from Huntingdon Fusion Techniques Limited, allowing a small length to be cut off to join two lengths of the 'Backing Tape' together.
|
|
Strapping machine suitable to strap the pallet vertically, it is equipped with strapping head mod.MS300. The optional features we recommend are:
- retractable sword
- translation device
- device for inclined strapping
- corners protectors device
- model with two heads and two bayonets
- device advising that the reel is finished |
|
System solutions for the Construction industry / For new installations or for integration into existing packaging lines
The right machine
Due to the flexibility of their machine construction programme,
Strapex can offer tailor-made solutions for customers
individual applications.
The right strap
A comprehensive range of plastic strap (PET, PP) and steel strap
each with their own characteristics to ensure that strap and
equipment are always the best possible combination!
Worldwide Sales and Service
You will receive expert advice on choosing the right solution
and service package together with the guaranteed availability
of spare parts. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
Cold Isostatic Pressing (CIP) is a method of compacting powders into green bodies and near-net shaped in a pressure vessel. The powder, which can be metallic, ceramic or graphite, is sealed in a flexible mold shaped like the end product. High pressure is used up to 600 MPa (6,000 bar/87,000 psi) having water as pressure medium. A high and uniform density is achieved, resulting in easier handling, easier machining and even predictable shrinking during sintering.
CIP applications include compaction of powders into refractory nozzles, metal filters, graphite parts, ceramics, cemented carbides, etc.
Avure Technologies Isostatic presses are widely recognized as the leading brand in the world. This is due to the Company's technological superiority in a number of areas, particularly in the institutional knowledge related to engineering, design, manufacturing and the application of high pressure. The first QUINTUS ® isostatic press was delivered in 1965.
AVURE offers a full line of standard models of Cold Isostatic Presses or models can also be custom configured to meet your needs. These presses are available with diameters of up to 2,5 m (8.2 feet) for pressures up to 600 MPa (6,000 bar/87,000 psi). Please contact Avure Technologies with your requirements. |
|
... see all the products in the category
Presses
|
Ceramic labels are useful in applications where more robust labels cannot withstand the extreme conditions. They tolerate temperatures up to 1400° C and are very resitant to acids and other aggressive chemicals.
Applications:
-manufacturing process of semi-conductors-,lenses or cd identification
-manufacturing process of tools and containers in high temperature areas
-manufacturing process in the aluminium and metal industry
|
|
Our High Tech-series offer VSM quality on the highest level. Due to the continuous self-sharpening the highest level of stock removal, an extra-long service life and hence an economical grinding are realised. At the same time they achieve an improved surface quality.
For applications involving the dry machining of stainless and high-temperature steels we recommend using TOP SIZE products. Their additional lubricating layer provides increased stock removal rates and significantly reduced temperature in the grinding zone, which prevents workpiece structural changes.
The VSM®CERAMICS series are special products for aggressive but cool grinding. The use of VSM®CERAMICS series lead to an increase in productivity with simultaneous improvement of surface quality and outstanding stock removal. |
|
SPK-Cutting Tools is opening up big potentials to increase productivity and efficiency in chip removal machining with innovative cutting materials and tooling, extensive application know-how and intelligent engineering. High Performance Cutting and Hard Part Machining - SPK-Cutting Tools offers excellent solutions for turning, milling and boring of cast iron and of hardened steel.
|
|
Features
- Radial leaded devices
- Aids compliance with:
- ITU-T K.20, K.21, K.45
- Narrow resistance tolerance
- RoHS compliant
Applications
Used as a secondary overcurrent protection
device in:
- Customer Premise Equipment (CPE)
- Central Office (CO)
- Access equipment |
|
SPK-Cutting Tools is opening up big potentials to increase productivity and efficiency in chip removal machining with innovative cutting materials and tooling, extensive application know-how and intelligent engineering. High Performance Cutting and Hard Part Machining - SPK-Cutting Tools offers excellent solutions for turning, milling and boring of cast iron and of hardened steel.
|
|
| Our forming tools which are used for example for the drawing, bending, expanding or welding of tubes also get top marks for wear resistance and surface finish. Here too, the good friction behavior of CeramTec high-tech ceramics allows long tool life, their low tendency to diffuse and adhere prevents cold sets and their hot hardness setting and thermal resistance properties reduce any tendency towards plastic deformation. |
|
Advanced Ceramic Technology is a recent term that
refers to a wide range of materials, which are
generally obtained from partition of inorganic raw
material –metal oxides-, and selected with a high
grade of purity. These materials are submitted to
shaping techniques of the powder metallurgy with a
following very high temperature sintering process
that leads to dense components, which high technical
performances offer a wide range of applications.
Thanks to their excellent properties, the Advanced
Ceramic Technology can be used in the making of
primary flow elements – with APLITEX as a pioneer.
At the present time, they are a key element in
processes that require:
• Extreme solidity.
• Stability at high temperatures.
• High resistance to corrosion.
• High resistance to chemical attacks.
• High resistance to vacuum.
• Long life. |
|
For cutting purposes CeramTec has developed a high-performance material zirconia - a special zirconia ceramic (TZP). It stands out from other materials with its extremely high cutting edge strength and very good bending strength and toughness. The use of zirconia cutting blades improves efficiency in cutting textile threads, and thus increases profitability.
|
|
The SPC98 dry and flush mounted ceramic pressure sensor uses an aluminum oxide ceramic sensor as a "dry cell" that is extremely resistant to overload, aggressive mediums, extreme min/max temperature, applications with solid particles and low pressure ranges. These transmitter's are made in either 316 S.S. or Hastelloy C and provide a 4-20mA output signal. The SPC98 is designed to be installed at the bottom of the tank.
FEATURES
*Loop powered, 4-20mA signal output
*Measuring ranges -1 to 580PSI (-1 to 40 bar) gauge /absolute
*Ideal for waste water or other applications with "dirty" medium
*Rugged and compact design- Body entirely 316 S.S. or Hasteloy C
*High accuracy, Excellent repeatability & Temperature compensated
*3A approved
The actual measuring range of the SPC98 sensor is determined by the thickness of the ceramic diaphragm, which if overloaded, stops on the ceramic substrate without sustaining damage. Ceramic cells do not expand and contract nearly as much as metal, ensuring good temperature stability. Common features of the SPC98 are low hysteresis, high repeatability, immunity to the effects of process builds up and outstanding resistance to chemical attack. |
|
Unique direct printing technology with specialised inks
Clean and accurately positioned print on each product
Up to 10 colours with integrated backstamp
Maximum image diameter of 320 mm
Capacity up to 500 prints/hour (in function of object, size, shape and number of colours)
Quick changeover, fast set-up, easy cleaning
Other configurations: MonoColor (up to Ř 350 mm inkcup) |
|
|
... see all the products in the category
| |
