|
|
Size Range
Diameter: 0.060 in. - 0.500 in.
Length: 0.100 in. - 2.00 in.
Length to diameter: 1.5:1 - 10:1
Precision needle rollers have multiple uses in a variety of industries including automotive, truck, farm and construction equipment, two-cycle engines, outboard engines and consumer durables. Needle rollers are mainly used as bearing rolling elements to transmit torque and reduce friction. They can also serve as precision shafts or as precision locating pins.
|
|
Drawn cup roller clutches are one-way clutches comprising thin-walled, drawn outer rings with a series of ramps on the inside diameter, plastic cages, springs and needle rollers. They can transmit torques in one direction and are radially compact. The roller clutches are available with and without a bearing assembly.
Drawn cup roller clutches give very precise indexing, since individual spring retention of each needle roller ensures constant contact between the shaft, needle rollers and the clamping surfaces. They allow high indexing frequencies due to their low mass and therefore the low moment of inertia of the clamping elements. They also have a low free-wheeling frictional torque.
Drawn cup roller clutches can be used in a wide variety of applications, for example as indexing elements, back-stopping clutches or overrunning clutches. The drawn cup roller clutch fulfils the overrunning or holding function as appropriate.
|
|
|
Free wheel with a cage with contact elements running on races primarily measured in inches
|
|
In this product group only the clamping elements are supplied, assembled into a cage or retainer.
This must be mounted between supporting inner and outer races which may be formed directly in the customer’s component or machine.
The races should be manufactured from the correct material and to the required specification and the whole assembly supported by the existing shaft bearings which must absorb all axial and radial loads.
Suitable lubrication and sealing also have to be provided.
|
|
|
Free wheels with bearing incorporated, with same dimensions of bearings series 6200, available in version ZZ and 2RS
|
|
Free wheels with cams to be incorporated with obstruction radial reduced.
Couples from 48 to 460 Nm for tree of diameter 20 with diamètre50.
They count rollers of blocking between a line of balls and rollers, to combine dynamic heads, static, axial and radial.
Without maintenance, autonomous, lubricated with grease for normal conditions of use, they are used to lock a step back or to place from one drive to the other in a kinematics to multiple order.
External dimension identical to the bearings series 59.
|
|
The transmission is involved in the 2 directions of rotation and is locked in position. The origin of the movement can be manual or electric.
The bidirectional transmission involves the transmission towards the right-hand side or the left. If the movement of entry ceases, the irreversible one locks the transmission in the position of stop and the movement of exit is neutralized in the 2 directions.
|
|
Placed between 2 energy sources, the oversteer one couples or disconnects whatever the differential speed.
It is a relayage simple, instantaneous, autonomous, without control.
To 360.000 Nm, the active elements are with slopes, cams.
Under casing, lubricated with oil or grease.
During launching out of high-speed, the oversteer one disunites and protects slow speed.
|
|
ECOLINE’s products have been designed to fit in applications where quality movement is needed at a low price. The patented design offers a well-protected, smooth slide that is easily and quickly mounted. ECOLINE combines the quality associated with all of ROLLON’s products with the affordability needed in application sectors like industrial protective panels, vehicle slides, and machine tool doors. ECOLINE is the answer to labor intensive, homemade solutions, cheap bent steel slides, or expensive, overdesigned round or profiled shafting.
|
|
Advantages of OSBORN Non-Woven Mill Rolls versus conventional rolls:
- High coefficient of friction (3 to 5 times grester than rubber)
- Eliminates surface scratching
- Tighter coils
- Long Life (5 to 10 times of rubber roll)
- Re-dressable in the field
- Self healing
- Improved squeegee action
- Does not generate cracks
- Resists damage due to construction
- Resilient
- Compressible
|
|
Mink roller brushes (BW) - Individually configured roller brushes with shafts
Mink roller brushes differ from other Mink round brushes by virtue of their integrated shafts. Owing to the wide-ranging demands made on these brushes, especially in terms of shaft dimensions, there is no advantage in maintaining a stock range. Nevertheless, with our extensive experience in this area we are able to configure special brushes for you very quickly. On account of its extraordinary versatility the Mink Zick-Zack-System can frequently serve as the basis for a reliable solution.
Your advantage:
• Individual configurations for special purposes
|
|
Deburring and Roller Brushes
Use Deburring and Roller Brushes for a professional and perfect finish of cut edges. Diameter, filling material, measurements of the brush and the required bore are determined by the appointed machine and the work piece. We exclude any imbalance by evenly arranged filling material and the testing of every brush.
|
|
|
Applied Brushes offer you complete solution to your Brushing Problems. We, as your reliable partners, offer you highest quality directly wound brushes for your brushing needs. These brushes can be re-wrapped directly on your shaft and dynamically balanced to suit your requirement for the best performance
|
|
| ... products without technical information |
| |
... see all the products in the category
Brushes
|
|
|
see the results for the following category
