|
|
| The Universal Mag Drive is the ideal sealing technology for critical liquid containment applications within Viking’s Universal Seal product line. It is dimensionally interchangeable with Viking's Heavy Duty bracketed and Universal Seal pumps, allowing for easy upgrade from packed or mechanical seals to sealless technology. The Universal Mag Drive’s hermetic, static sealed canister provides the highest level of liquid containment available by eliminating traditional dynamic shaft seals. It also eliminates housekeeping issues and downtime due to seal failure. This product is designed to handle a broad range of applications requiring continuous duty at pressures up to 200 PSI (14 Bar). |
|
| Viking Mag Drive® sealless internal and external gear pumps eliminate leakage and maintenance associated with shaft seals. For use with all hazardous/toxic fluids, hard-to-seal liquids and for 24/7 operations which cannot afford unscheduled downtime due to seal failure. Some models allow reversible direction of flow, and temporary run-dry capability. May be close-coupled to IEC or NEMA motors, or long-coupled with optional bearing carrier. ATEX conformity available. |
|
The RFIK mechanical hydraulic tester provides the ideal solution for servicing and commissioning
hydraulic circuits on agricultural and other mobile machinery.
The kit comprises of a direct acting flow indicator with built in thermometer, a loading valve and a pressure gauge all built into a strong steel case with a removable lid.
The unit is self contained and requires no electrical power. The dials are clear and easy to read.
Installation is extremely simple and the test kit can be connected into either the pressure or return lines. The loading valve and pressure gauge allow a progressive build up of system pressure in complete safety.
The test kit provides the service engineer with quick, accurate and simple performance testing of pumps, motors, valves, cylinders and complete hydraulic
circuits.
Note: This unit is not designed for permanent installation. |
|
Flow Indicators are designed for continuous monitoring or intermittent use commissioning and
servicing hydraulic systems up to 420 bar, 6000 psi. The large clear 63mm diameter dial ensures that quick checks can be made to determine pump performance and setting of flow control valves. They can be used on mobile and industrial hydraulic circuits. Also lubrication and coolant systems using oil.
These direct acting flow indicators can be installed in hazardous areas or on applications where no power is available. The flow indicator design ensures good reliability and minimises the effects of contamination. |
|
Beyond Roots Blowers
Higher efficiency(45% over roots blowers) , no oil system, less noise(85dB @1m) , no vibration, compact size without gear box, no scheduled maintenance, and competative price are realized to our products through our innovative technology of air foil bearing, sensorless inverter, high speed PM motor(95% of efficiency) and cast impeller.
|
|
Beyond Roots Blowers
Higher efficiency(45% over roots blowers) , no oil system, less noise(85dB @1m) , no vibration, compact size without gear box, no scheduled maintenance, and competative price are realized to our products through our innovative technology of air foil bearing, sensorless inverter, high speed PM motor(95% of efficiency) and cast impeller.
|
|
... see all the products in the category
Blowers
|
| ... products without technical information |
| |
| ... products without technical information |
| |
The humidity and temperature transmitters for industrial applications measure relative humidity and temperature f.i. in air and other non-aggressive gases within a (working) temperature range up to 200°C or under pressure up to 25 bar.
Galltec+Mela offer as well versions for applications in gases containing ammonia or transmitters in die cast housing for outdoor use.
|
|
The humidity and temperature transmitters for industrial applications measure relative humidity and temperature f.i. in air and other non-aggressive gases within a (working) temperature range up to 200°C or under pressure up to 25 bar.
Galltec+Mela offer as well versions for applications in gases containing ammonia or transmitters in die cast housing for outdoor use.
|
|
Forged valves with direct passage
- DNN (Nominal Diameter): 10-50
- PN (Pressure rating): 130-420
Execution: Class 800 to 2500
Technology: Forged
Principle: Oblique seats
Markets:
- Chemistry
- Engineering
- Maintenance
- Oil/gas
Connections:
- Has flanges
- To weld
- Tapped
Types of connection:
- ANSI
- BSP/NPT
- BW/SW
- PN/ISO |
|
Balancer
The rope balancer is a pneumatically powered hoist unit. Thanks to the low manual force required for the horizontal movement, these units are the optimum solution for careful load balancing and positioning. In particular complicated positioning and assembly tasks can be performed easily and safely with this unit. Rope balancers make it possible to reposition loads quickly in short cycles.
There are two different basic units:
D-BP 55 Load capacity 50 kg (at 6 bar)
D-BP 110 Load capacity 100 kg (at 6 bar) |
|
|
... see all the products in the category
Hoists
|
Roscamat 200; Capacity M2-M14 (M16)
This machine consists of a pendular parallelogram that is balanced by a pneumatic spring, plus a radial arm.
The gas spring and radial arm assembly fixes the motor head and keeps it perpendicular to the working area. The motor is equipped with a quick-change system and is rotated by compressed air that has previously been filtered and lubricated by a unit for that purpose.
Taps and shank tooling fit to the motor's quick-change system by means of tapholders.
|
|
Our pneumatic AirLiquid PN-Module has been improved for use with liquids. Sealing material is Viton (FKM / Fluorcarbon rubber) providing high resitance against oils, gasoline, diesel, biodiesel or ethanol. The Module is available with one or two pneumatic nipples. Brass-valves, locked on socket side, ensure reliability, efficiency and high mechanical firmness within the durable industrial environment. GES can provide three versions of this module, including locked valves on both sides and a push/pull hose-connection mechanism for rapid connection/disconnection. With increased perfomance for the same price the AirLiquid PN-Module now replaces our past Pneu-Module.
Find more information on the datasheet and on www.ges-electronic.de |
|
Ultra-high-pressure hydraulic hose assemblies with crimped on fittings and couplings/nipples and operating pressures starting at 10,150 PSI (700 bar).
CEJN ultra-high-pressure hose assemblies feature high-pressure, spiral-reinforced polymer hose styles, constructed of multiple layers of spiral steel reinforcement with thermoplastic covers and tubes. Hose can be cut to any length and combined with multiple end connection possibilities.
One hundred percent of all hose assemblies are individually proof tested to 1.5 times their rated maximum operating pressure.
CEJN hose assembly capabilities, available throughput the world, enable customers to:
· Receive quick turnaround and nearby after-sales support
· Save production time and money, since assemblies are ready for immediate use without further assembly or testing and are more economical then buying individual components
· Purchase both hose and couplings from the same supplier, ensuring compatible components that are safety and performance tested
With CEJN’s extensive inventory of bulk hose and end connections, many hose assembly styles can be made and shipped the same day orders are received.
|
|
Sample Gas Filters
The distance between the extraction point of sample gas and the analyser cabinet is normally bridged by tubes or hoses in continuous emission monitoring (CEM) systems. Depending on the method of analysis (FDIR, HFID, hot wet analysis, total hydrocarbons, etc.), these gas lines can be unheated or must be heated to prevent unwanted condensate formation.
Due to the nature of such installations, additional in-line filtration is required.
Bühler offers a wide selection of unheated and heated filters specifically designed for gas sampling applications. |
|
Standard with a hose pillar 13 mm and a connection 3/8” BSP female thread.
Applications:
- Extraction of welding vapour, if required from three places simultaneously using a manifold
- Extraction of dangerous vapours from boilers, ovens, tanks, etc.
- Supplying clean air to closed work areas
- Ventilation of closed work areas, cooling vulnerable parts
- Atomizing liquids
- Discharging smoke, steam or vapour from solvents, paint, etc.
- As extension of a central ventilation system, e.g. by means of hose length 20-50 m, ø 125 mm |
|
The Webster DHM 3 Series Digital Hydraulic Multimeter is an all-in-one unit designed to test the performance of hydraulic pumps, motors, valves and hydrostatic transmissions.
The easy-to-use design allows the operator to just switch on and test, without complex setup or special training.
The DHM measures flow, pressure and temperature. In addition, the DHM holds the peak pressure value as well as calculating hydraulic power and volumetric efficiency using the unique P-Q test button.
The DHM is the ideal tool for pinpointing hydraulic system faults, reducing downtime, and helping in preventative maintenance. The design builds on the very successful Webster DHT range of portable testers with the addition of a large digital display and a built-in pressure transducer.
The turbine flow meter with built-in loading valve is bi-directional and specifically designed to enable the operator to simulate the maximum working pressure safely during normal machine operation.
The loading valve has safety discs built-in to protect the operator and the multimeter in the event of excessive pressure, allowing oil to bypass the loading valve INTERNALLY with no spillage of oil from the hydraulic circuit, eliminating any danger to the operator or environmental hazards.
|
|
|
|
