|
|
Verdergear gear pumps for laboratory (max 550 l/h)
Verdergear gear pumps for industry (max 10000 l/h)
Verdergear inner geared gear pumps (high viscous fluids)
Verdergear Micro Electronic sealless gear pumps
All pumps are constructed according to the suction shoe principle. This suction shoe style design compared to the cavity styled pumps results in a higher efficiency.
|
|
|
The Universal Mag Drive is the ideal sealing technology for critical liquid containment applications within Viking’s Universal Seal product line. It is dimensionally interchangeable with Viking's Heavy Duty bracketed and Universal Seal pumps, allowing for easy upgrade from packed or mechanical seals to sealless technology. The Universal Mag Drive’s hermetic, static sealed canister provides the highest level of liquid containment available by eliminating traditional dynamic shaft seals. It also eliminates housekeeping issues and downtime due to seal failure. This product is designed to handle a broad range of applications requiring continuous duty at pressures up to 200 PSI (14 Bar).
|
|
|
Diener Precision Pumps manufacture the highest quality and most accurate precision external magnetic drive gear pumps in the world. With flow ranges from 5 ml/min to 10 L/min our pumps are designed to give optimum performance over a wide range of applications.
|
|
Miniature Magnetically Coupled Pumps > T Series
- Flow Rates from 5 to 650 gph (2460 L/hr)
- Differential pressures to 250 psi (17.2 bar)
- ATEX approved
|
|
|
Leak-free external-gear pumps that provide precise, non-pulsing flows from 1 ml/min to 10 USGPM (38 lpm), differential pressures to 250 psi (17.2 bar), system pressures to 500 psi (34.5 bar), temperatures to 350°F (176°C), viscosities to 2000+ cps
|
|
|
Viking Mag Drive® sealless internal and external gear pumps eliminate leakage and maintenance associated with shaft seals. For use with all hazardous/toxic fluids, hard-to-seal liquids and for 24/7 operations which cannot afford unscheduled downtime due to seal failure. Some models allow reversible direction of flow, and temporary run-dry capability. May be close-coupled to IEC or NEMA motors, or long-coupled with optional bearing carrier. ATEX conformity available.
|
|
|
|
|
|
|
The CMD series is a groundbreaking new series of sealless, non-metallic pumps specially designed for crucial liquid containment applications. This series offers several important benefits, including: 100% renewable performance with use of Viking’s recommended spare parts kit; an innovative magnet system with a patent-pending spline design that allows the magnet to self-align while floating on the shaft with no added fasteners; self-lubricating, heavy-duty bearings with patent-bearing geometry that allow dry-run capabilities; and, a unique, universal flange that allows for easy installation for both ANSI and DIN flanged systems, among other key benefits. In addition, the CMD series offers extreme flexibility, including an array of models with port sizes ranging from .25” to 1.5” (6.35 to 38.1 mm), a performance level of 100 SSU (22 cSt), normal capacity at 1450 RPM ranging from 0.34 to 30 GPM (1.3 to 120.0 LPM), normal capacity at 1750 RPM ranging from 0.4 to 33.0 GPM (1.5 to 125.0 LPM), a maximum differential pressure of 150 PSI (10 Bar), a maximum hydrostatic pressure of 200 PSI (14 Bar), approximate shipping weights ranging from 4 to 44 pounds (2 to 20 kg), and a maximum recommended operating temperature of 150°F (65°C).
|
|
|
|
|
|
With various applications conventional seals come up against their limits. Typical applications can be found in PUR plants, refrigerating installations and vacuum plant. It is possible to fit the KF 0 with a magnetic coupling for these applications. The magnetic coupling serves as a shaft seal and to
transmit the torque. The outer rotor of the magnetic coupling is placed on the motor shaft and the inner rotor directly on the pump shaft. The torque is transmitted between the outer and inner rotors through the magnetic forces. The split case, which seals the pump hermetically, is located between the two rotors. The magnetic coupling is used if an absolutely tight seal is required between the pump chamber and the atmosphere, e. g. for dosing isocyanate, where contact with the air would lead to an undesired hardening of the medium. It can be used in vacuum operations, e.g. filling brake liquid, and reliably prevents air penetrating into the system. Non-leak operations are also guaranteed when used in sealed systems with a high admission pressure on the pump suction side. The magnetic coupling is predestined for dosing hazardous and harmful media.
|
|
Stainless steel gear dosing pump with magnetic coupling
Metering pump for the food industry with flushing connections and passages for CIP cleaning
HP radial piston pump (closed design)
HP radial piston pump submersible (open design)
|
|
|
Liquiflo's 4-Series pumps are low-flow magnetically-driven gear pumps. The 4-Series housings are manufactured from Bar Stock in 316 Stainless Steel, Alloy-C or Titanium. With several material options for shafts, gears, wear plates and bearings, these pumps can be used in a wide variety of chemical processing applications.
|
|
TopGear MAG - Protecting your future
TopGear MAG is a range of leak-proof internal gear pumps for low and high viscous liquids which are corrosive, toxic, aggressive or expensive.
Total containment of the liquid inside the pump is achieved using a hermetically sealed can, which isolates the liquid from the surrounding environment. This eliminates the need for shaft seals and the associated wear and leakage that would normally be experienced. The Magnetic Drive pumps are therefore not only environmentally friendly – they also contribute to improved safety in chemical and process plant environments.
Complying amongst others with the “ATEX” (ATmospheres EXplosibles) directive, magnetic drive pumps make an important contribution to health and safety on process plants.
TopGear MAG provides environmental, human, legal and economical protection -
|
|
Magnetic drive gear pumps MDG series
Leakage free, sealless structure
The pump mechanism is the magnetic drive type. Free of leakage trouble, the pump is suitable to be incorpotated in various equipment.
Superior corrosion resistance
The wetted parts are manufactured from superior corrosion-resistant materials such as stainless steel, PPS, and PEEK. Therefore, the pump can be used to transfer various types of chemical solutions.
Long life design
Each part that is precision processed using Iwaki's original technology excels in thermal resistance, therefore does not cause pump troubles due to thermal expansion of the parts. Even when operated for long continuous hours, the pump should exhibit superior durability.
|
|
General description :
GATHER Industrie’s magnetic drive gear pump is made from stainless steel, Hastelloy or titanium and may be used as dosing pump, process pump or for laboratory service. The hermetically sealed gear pumps convey and meter in a non-pulsating manner even non-lubricating liquids such as water, salt solutions, solvents, acids and caustic solutions. As low-maintenance process pumps they can be optimally integrated into existing systems; when used for metering or dosing service they enable highly precise and reproducible flow rates to be attained. Based on the magnetic coupling and making use of new materials GATHER Industrie constantly advances the pumps originally intended for laboratory service to optimum acid or caustic solution pumps used in pilot facilities (miniplant) and for process technological applications. It goes without saying that the pumps meet the requirements of the Pressure Vessel Code and are ATEX compliant for use in hazardous areas.
|
|
Tuthill lubrication and circulation pumps handle many viscosities and sustain a constant flow at any pressure. With only two moving parts the internal gear design allows the pump to handle more viscosities than it's competitors.
Simple, Compact Design offers high efficiency and longer life.
Positive Reversing Action - The unique reversing feature allows the lubrication and circulation pumps the ability to reverse flow without the use of valves.
L Series
- Internal gear pump design
- Compact and flexible drive options
- Available with positive reversing feature
- Flow rates to 13.7 usgmp (3m3/hr)
- Pressures to 500 psi (34.5 bar)
- Standard with single mechanical seal
- Cast Iron Construction
|
|
Tuthill lubrication and circulation pumps handle many viscosities and sustain a constant flow at any pressure. With only two moving parts the internal gear design allows the pump to handle more viscosities than it's competitors.
Simple, Compact Design offers high efficiency and longer life.
Positive Reversing Action - The unique reversing feature allows the lubrication and circulation pumps the ability to reverse flow without the use of valves.
1000 Series
- Internal gear pump design
- Flow rates to 13.7 usgpm (3M3/hr)
- Pressures to 300 psi (20.7 bar)
- Multiple porting options with side ports as standard
- Cast iron construction
|
|
|
The High-Speed Compact internal gear pumps offer heavy-duty design and small footprint for rotating equipment lubrication such as compressors and turbines. They are just one of many options that Viking offers for lubrication pumps. Others include gearbox lube pumps that pump in one direction regardless of shaft rotation, pump kits for OEM lubrication applications, and a variety of internal gear, external gear and gerotor pumps suitable for lube oil and grease applications,
|
|
G Series Gear Pumps
G-series is designed for metering, booster, vacuum extraction, lubrication and transfer of a great variety of fluids in any industrial application. Continually updated, more than forty years of experience and development are invested in this series, making it the meeting point for quality and practicality.
Materials
Housing: Cast Iron G25
Rotors: Steel 39NiCrMo3
Bearings: PTFE on Stainless Steel
Sealing Elements: Various
Application
Viscosity: from 1CST to 1'000'000CST
Pressure: from 0BAR to 30BAR
Size: from 1.5cc/rev to 300cc/rev
Temperature: from -10°C to +240°C
|
|
|
|
|
|
Description
The MP pump is designed for single line automatic lubrication
systems. It composes an electric motor, and a gear pump
mounted on a reservoir equipped with an electrical low level
switch. The reservoirs are metal or plastic.
Functioning
Once under charge the motorised gear pump pressurises
lubricant in the primary supply line. A discharge valve
depressurises the primary supply line at the completion of each
cycle. The motor can be stopped by a timer or by a pressure
switch situated at the end of the primary line. A by-pass permits
the pressure to be regulated when being used with a single line
resistance system
Characteristics
- Motor: 3 phase electric motor, ventilated,
multivoltage
220/460V - 50/60 Hz,
90 W 1500/1800 rpm.
- Discharge: from 100 to 750 cm3/min
(at 1500 rpm).
- Pressure regulation: from 0 to 25 bar.
- Over pressure valve set: 20-22 bar.
- Reservoir capacities: 4 litre (plastic);
6, 12 and 30 litres (metal)
- Electrical low level switch: 240V max.
Power rating: 0,04 A max
- Working temperature: 80°C max.
- Lubricants to be used: mineral oils with viscosities 30 to
3000 Cst at working temperature.
- Other lubricants: contact Bijur.
|
|
The GHC Series of iron, steel and stainless steel pumps is designed for continuous duty service for applications in the operating ranges shown. These units are available with head jackets for temperature control, carbon graphite bushings for low-viscosity liquids, silicon carbide bushings for wear resistance, and numerous seal options. The GHC Series units may be foot-mounted or, by using a motor adapter, direct connected to NEMA "C" flange motors. This heavy-duty series provides superior rotor shaft support and an integral, maintenance-free radial/thrust bearing for reduced deflection and wear.
Specifications
Size: 1" (25 mm), 1-1/2" (37.5 mm), 2" (50 mm), 2-1/2" (62.5 mm), 3" (75 mm)
Max Capacity: 107 GPM (7 lps)
Max Viscosity: 250,000 SSU (54,000 cST)
Max Pressure: 300 PSI (21 BAR)
Min Temperature: -60 F (-51 C)
Max Temperature: 350 F (177 C)
Materials of Construction: Cast Iron, Cast Steel, Stainless Steel
|
|
The GHC Series of iron, steel and stainless steel pumps is designed for continuous duty service for applications in the operating ranges shown. These units are available with head jackets for temperature control, carbon graphite bushings for low-viscosity liquids, silicon carbide bushings for wear resistance, and numerous seal options. The GHC Series units may be foot-mounted or, by using a motor adapter, direct connected to NEMA "C" flange motors. This heavy-duty series provides superior rotor shaft support and an integral, maintenance-free radial/thrust bearing for reduced deflection and wear.
Specifications
Size: 1" (25 mm), 1-1/2" (37.5 mm), 2" (50 mm), 2-1/2" (62.5 mm), 3" (75 mm)
Max Capacity: 107 GPM (7 lps)
Max Viscosity: 250,000 SSU (54,000 cST)
Max Pressure: 300 PSI (21 BAR)
Min Temperature: -60 F (-51 C)
Max Temperature: 350 F (177 C)
Materials of Construction: Cast Iron, Cast Steel, Stainless Steel
|
|
Technical Data:
-Stainless steel frame
-Switch cabinet with controler, pneumatic and mechanics
-Feed part A direct from suppliers 50 litre open topped straight sided rums, follower-plate unit with 360mm diameter
-Feed part B direct from suppliers 50 litre open topped straight sided drums, follower-plate unit with 360mm diameter
-Metering pump with drive unit mounted on follower plate A
-Metering pump with drive unit mounted on follower plate B
-Low level cut off for both components
-Three-phase current motor
-Electronic adjustable dispense rate
-Electronic mixing ratio adjustment
-Pressure lines 250 bar
-Mixing block with dynamic and static mixing
-Purge with one component
-Swivel boom for mixing block
-Follower plate unit and Unidos 300 TX/MP machine are based on a zinc plated steel base with rollers
-Potlife alarm, adjustable time
|
|
The DOPAG ELDO-MIX range of gear pump driven metering and mixing systems are built in modular form and are custom designed.
Depending on the specific application, various basic configurations are available.
|
|
|
To view pump drive product information, please select a series below. To learn more about the OEM applications that use pump drives
|
|
Technical Data:
-Stainless steel frame
-Switch cabinet with controler, pneumatic and mechanics
-Feed part A direct from suppliers 50 litre open topped straight sided rums, follower-plate unit with 360mm diameter
-Feed part B direct from suppliers 50 litre open topped straight sided drums, follower-plate unit with 360mm diameter
-Metering pump with drive unit mounted on follower plate A
-Metering pump with drive unit mounted on follower plate B
-Low level cut off for both components
-Three-phase current motor
-Electronic adjustable dispense rate
-Electronic mixing ratio adjustment
-Pressure lines 250 bar
-Mixing block with dynamic and static mixing
-Purge with one component
-Swivel boom for mixing block
-Follower plate unit and Unidos 300 TX/MP machine are based on a zinc plated steel base with rollers
-Potlife alarm, adjustable time
|
|
|
Viking in-line gear reducers offer reduction ratios from 2.6:1 to 35.1:1, with the ability to handle loads up to 260 kW. Solid input shaft or close-coupled input side adapters for IEC or NEMA motors offer mounting versatility. A second series of offset gear reducers, with ratios from 2.24:1 to 7.95:1, allows rotation of the input shaft to match motor height for easy mounting, while maintaining output shaft height. They are capable of loads to 30 kW.
|
|
|
|
