|
|
Manipulator Panto' Lecq Suspended (Pantograph):
In version suspended, PANTO' LECQ makes it possible to handle loads going from 0 to 250 kg while optimizing the operating areas available (useful ray of 3 meters, displacement in X following the definition of the zone to be covered), in perfect ergonomics and for the men and the material.
Example of handled products:
- Glazing, Panel of wood.
- Barrels.
- Reels.
- Paperboards.
- Castings.
- Bags.
- automobile Parts (limps speed, coils, doors, cap, seats, panel instrument...)
Specific hand of gripping on request.
Turnkey installation.
|
|
Pneumatic parallelogram manipulator Z-Arm
Z-Arm units can be used in the following combinations:
- as mounted on a pillar
- as suspended travelling units
- as suspended stationary units
|
|
Pneumatic parallelogram manipulator Z-Arm
Z-Arm units can be used in the following combinations:
- as mounted on a pillar
- as suspended travelling units
- as suspended stationary units
|
|
|
|
|
|
Koike Aronson / Ransome manufactures a complete line of turning rolls which maximize both safety and production with load capacities ranging from 3000 to 2,400,000 pounds.
Offering the widest variety and capacity ranges of turning rolls in the world, Koike Aronson / Ransome always has a fit for your application. Variable speed powered rotation with constant or variable wheel centerline settings are available.
Rubber, Steel, urethane and Micarta (phenolic) wheels are also available. Traditional, Unitized, Self-Adjusting (SA), Tractred, Turbine and Tilting rolls are just some of the models we offer.
Manual or powered mobile sub base cars can be included for quick adjustment of varying vessel lengths. Special engineered Turning Rolls are always available.
MACHINE FEATURES
- For rotating pipes or vessels
- Capacities range from 3,000 lb to 2.4 million pounds
- Rubber, Steel or special composite wheels
- Precise Center Distances
- Heavy Duty Chassis Design
- Overload Discs protect rubber tires on 5,000 lb units & above
|
|
|
Koike Aronson / Ransome manufactures a complete line of gear driven welding positioners ranging from 66 to 1,000,000 pounds. Special engineered positioners are always available.
|
|
Careful handling with GIS vacuumlifters
(up to 500 kg)
- for a variety of products and all kinds of
load surfaces
- combination with electric chain hoists or
wire rope hoists
|
|
The Glass PANTO'LECQ manipulator
PANTO'LECQ allows to handle a rang of glass from 0 to 500 kg while optimizing available work areas
|
|
|
The manipulator with cable makes it possible to handle paperboards going from 0 to 300 kg with a suction cup gripping while optimizing the operating areas available, in perfect ergonomics and in full safety for the men and the material.
|
|
The Tube of Lifting uses the same flow of aspiration for the catch of the product, the lifting and the transfer of the load. Thanks to this system of aspiration of reliable and robust design, it is possible to handle loads without effort in any safety for your operations of handling, palletization or depalettisation.
Charge up to 200 kg
Type charges: bags, paperboard, drum
|
|
AO Series Air/Oil Hydraulic Manipulators
For effortless lifting and unobstructed reach, AO Series manipulators provide strong lifting and positioning power in compact, easy-to-operate units. Running quietly and trouble-free on shop air and a self-contained oil supply, AO Series manipulators are provided with low and high points of the lift stroke determined by your specific application requirements. Its non-electric operation is ideal for C1D1 areas.
Manually-guided articulating arms are available with radial reaches up to 96 inches. The unique linkage design allows smooth, continuous movement throughout the work area. Horizontal movement is not restricted by vertical supports, cabling, or vacuum hoses. This permits the arm to maintain the attitude of the load for reach-in or reach-under applications.
|
|
UM Series Underhung-Overhead Manipulators
Unidex manipulators provide versatile solutions when mounted overhead. One machine can do the work of many by taking advantage of the X and Y axis movement offered by bridge cranes. Unidex works with various crane manufacturers and is an authorized dealer of several brands, enabling us to supply the ideal combination crane-manipulator for your needs.
The unique design of Unidex UM Series manipulators offers reach-in flexibility for machine loading and unloading, plus the capability for stabilizing out-of-balance loads that cannot be handled as well by a swinging or dangling hoist.
UM Series manipulators have a wide range of applications including the handling of castings, parts or tooling, and stacking and reaching into restricted areas such as ovens, parts washers, racks, presses, and other equipment.
|
|
|
|
|
|
- Retractors -
Conductix-Wampfler retractors are designed in such a way that retraction force increases smoothly as the cable is extended. As a result, the attached tool is returned to its starting position by the retractor after use, leaving the workbench free for other tools or equipment. An assurance of precision work is provided by the progressive increase in spring force.
- Balancers -
Conductix-Wampfler balancers can be identified by their conical cable drum, which ensures that the retraction force remains virtually ‘constant’, throughout the full cable travel. As a result, the position is retained after the attached tool has been used. In addition, no noteworthy increase in retraction force occurs when delicate operations are being performed.
- Cable reels -
Conductix-Wampfler Cable reels are mostly used for the supply to electromechanically driven tools in workshops, commerce and industry. The cables are no longer lying around on the floor, the safety level in the company is enhanced, and the operational life of the cables is also increased. In our program you can find cable reels from 2 x 1 mm², with 7 meters take-up length, through 8 x 1.5mm² and 30 meters take-up length, up to reels that are suitable for grounding tank wagons, with 1x16mm² and 15 meters take-up length.
|
|
Suspending your power tool above the work surface with a tool stand and balancer reduces clutter, increase tool and cable life, and improves operator efficiency. Mounting the tool in a torque arm takes the torque reaction force away from the operator's hand.
Tool balancers, used in conjunction with our tool stand or existing overhead support, will keep your screwdriver at the ready, leaving your work area clear when the driver is not in use. These balancers are easy to install and adjust. Choose the appropriate model to suit the weight of your screwdriver.
All models have a maximum travel of 6 ft (1.8 m).
|
|
Aero-Motive® balancers allow the worker to move the suspended tool or object up or down with very little effort. Depending on the spring adjustment, object will remain in position or retract when no force is applied. With a spiral groove on a tapered drum, the winding radius is increased to match the torque buildup of the spring, thus neutralizing it and achieving a balance condition.
Standard Duty Balancers offer full featured tool support at an economical price. Maximum weight up to 24 lbs/ 10.9 kg.
Heavy Duty Balancers are built for higher impact resistance & long-term, continuous use. Maximum weight up to 100 lbs/ 45.5 kg.
Severe Service Balancers provide the support of production tools in the most demanding applications. Maximum weight up to 200 lbs/ 91 kg.
|
|
The COL range provides weightless suspension for loads from 0.7 to 55 kg. COL 1 has a 2 mm polyester rope and COL 2, 3, 4 have 2.5 mm stranded steel wire. Every COL balancer is equipped with an automatic braking system. The braking system makes it possible to completely connect or disconnect the spring force to or from the load.
|
|
Make tools light as air
Balancers :
- Eliminate strain and fatigue
- Increase productivity
- Streamline work stations
- Applications : assembly lines, packaging units
Cable tool balancers:
- Adjust easily to any tool size and weight
- Secure fastenings
- Rugged aluminium construction
- Long-lasting stainless steel cable
- Various safety systems
|
|
With cylindrical drum: progressive traction, one balances the load or the tool, one positions his height with the choice, one draws on the load or on the tool to carry out the slackened work, once load or the tool, they return to their initial position.
With conical drum: constant traction on all the race, the load or the tool remain in balance with the desired position.
With pawl: allows to block the rope lathe by lathe or with the wanted position, to free to draw downwards.
Without pawl: the load is balanced or the tool with the position desired, after use the load or the tool takes again its initial position.
|
|
To support all types of controls on the ground: pushbutton box, control for stages, various levels or staircase...
With detent pawl: allows to block control on the ground with the desired height, to free to draw downwards.
Automatic recall by spring.
Rope steel covered plastic.
Drum painted steel, support aluminum.
N.B. to take account of the weight of the pushbutton box as well as weight of the electrical cable to support
|
|
BalTec Tool Balancers
BalTec Tool Balancers have been designed and manufactured to prevent operator fatigue, hence improving productivity. BalTec tool balancers can also eliminate accidental dropping of pneumatic hand tools, helping to reduce repair and replacement costs.
|
|
| ... products without technical information |
| |
|
|
