|
|
|
|
|
|
- Retractors -
Conductix-Wampfler retractors are designed in such a way that retraction force increases smoothly as the cable is extended. As a result, the attached tool is returned to its starting position by the retractor after use, leaving the workbench free for other tools or equipment. An assurance of precision work is provided by the progressive increase in spring force.
- Balancers -
Conductix-Wampfler balancers can be identified by their conical cable drum, which ensures that the retraction force remains virtually ‘constant’, throughout the full cable travel. As a result, the position is retained after the attached tool has been used. In addition, no noteworthy increase in retraction force occurs when delicate operations are being performed.
- Cable reels -
Conductix-Wampfler Cable reels are mostly used for the supply to electromechanically driven tools in workshops, commerce and industry. The cables are no longer lying around on the floor, the safety level in the company is enhanced, and the operational life of the cables is also increased. In our program you can find cable reels from 2 x 1 mm², with 7 meters take-up length, through 8 x 1.5mm² and 30 meters take-up length, up to reels that are suitable for grounding tank wagons, with 1x16mm² and 15 meters take-up length.
|
|
Suspending your power tool above the work surface with a tool stand and balancer reduces clutter, increase tool and cable life, and improves operator efficiency. Mounting the tool in a torque arm takes the torque reaction force away from the operator's hand.
Tool balancers, used in conjunction with our tool stand or existing overhead support, will keep your screwdriver at the ready, leaving your work area clear when the driver is not in use. These balancers are easy to install and adjust. Choose the appropriate model to suit the weight of your screwdriver.
All models have a maximum travel of 6 ft (1.8 m).
|
|
Aero-Motive® balancers allow the worker to move the suspended tool or object up or down with very little effort. Depending on the spring adjustment, object will remain in position or retract when no force is applied. With a spiral groove on a tapered drum, the winding radius is increased to match the torque buildup of the spring, thus neutralizing it and achieving a balance condition.
Standard Duty Balancers offer full featured tool support at an economical price. Maximum weight up to 24 lbs/ 10.9 kg.
Heavy Duty Balancers are built for higher impact resistance & long-term, continuous use. Maximum weight up to 100 lbs/ 45.5 kg.
Severe Service Balancers provide the support of production tools in the most demanding applications. Maximum weight up to 200 lbs/ 91 kg.
|
|
The COL range provides weightless suspension for loads from 0.7 to 55 kg. COL 1 has a 2 mm polyester rope and COL 2, 3, 4 have 2.5 mm stranded steel wire. Every COL balancer is equipped with an automatic braking system. The braking system makes it possible to completely connect or disconnect the spring force to or from the load.
|
|
Make tools light as air
Balancers :
- Eliminate strain and fatigue
- Increase productivity
- Streamline work stations
- Applications : assembly lines, packaging units
Cable tool balancers:
- Adjust easily to any tool size and weight
- Secure fastenings
- Rugged aluminium construction
- Long-lasting stainless steel cable
- Various safety systems
|
|
With cylindrical drum: progressive traction, one balances the load or the tool, one positions his height with the choice, one draws on the load or on the tool to carry out the slackened work, once load or the tool, they return to their initial position.
With conical drum: constant traction on all the race, the load or the tool remain in balance with the desired position.
With pawl: allows to block the rope lathe by lathe or with the wanted position, to free to draw downwards.
Without pawl: the load is balanced or the tool with the position desired, after use the load or the tool takes again its initial position.
|
|
To support all types of controls on the ground: pushbutton box, control for stages, various levels or staircase...
With detent pawl: allows to block control on the ground with the desired height, to free to draw downwards.
Automatic recall by spring.
Rope steel covered plastic.
Drum painted steel, support aluminum.
N.B. to take account of the weight of the pushbutton box as well as weight of the electrical cable to support
|
|
BalTec Tool Balancers
BalTec Tool Balancers have been designed and manufactured to prevent operator fatigue, hence improving productivity. BalTec tool balancers can also eliminate accidental dropping of pneumatic hand tools, helping to reduce repair and replacement costs.
|
|
Dalmec has already manufactured more than 4000 Manipulators for the car industry, solving the handling problem of:
Axles Gears
Batteries Tailgates
Bottles Bonnets
Headlinings Pedal assembles
Clutch assemblies Radiators
Drive shafts Rear seats
Cylinder heads Side members
Dashboards Body sides
Doors Sunroofs
Engine frames Spare wheels
Engines Steering columns
Exhaust pipes Suspensions
Floor panels Fuel tanks
Flywheels Wheel assemblies
Front seats Wheels
Frontal parts Windscreens
|
|
Dalmec offers a range of tooling heads for handling drums, barrels, containers, pails and canisters in a “weightless’ condition.
Simple to use, they allow the operator to move the product quickly, accurately and with the utmost safety within the working area.
These manipulators offer maximum flexibility in type, design, dimensions and gripping system in order to suit the specific requirements of the user and the environmental conditions of the working area.
|
|
Dalmec offer a wide range of manipulators, fitted with custom-built tooling for the “weightless” handling of various mechanical components.
Simple to use, they allow the operator to move the products quickly, accurately and easily in the operating space.
The type, design, dimensions and picking systems incorporated in these manipulators are tailored to suit the specific requirements of the user and the varying environmental conditions available.
|
|
|
PARTNER PM equipped with special gripping tools, is particularly suitable to manually handle, in a weightless condition, center and off-set loads in any direction. Thus enables the operator to work quickly, with precision and without fatigue, in excellent ergonomic and safety conditions. Its versatile structure also allows to fit in any working environment.
|
|
|
|
|
|
The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific customer’s requests. Such devices are equipped with movement units which can be manual or pneumatic, and are necessary to the movement cycle.
The usability and functionality of the system are obtained by keeping the operator’s needs at the forefront during the planning phase; they are in fact considered by our personnel a fundamental part of the specific characteristics of the movement products.
The parallelogram shaped ATISmirus are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, fixed overhead or sliding on overhead runway tracks.
Our manipulators do not need electrical power but only compressed air at 5-7 bar. This implies a remarkable reduction of the installation time simplifying the operation of the set-up of the working area.
|
|
Dalmec offer a wide range of equipment for the “weightless” handling of sheets, various panels, panels of glass etc.
Simple to use, they allow the operator to move the sheets around quickly, accurately and safely.
These manipulators are custom-built and the type, design, dimensions and picking system used is specially adapted to suit the specific requirements of the user and the various environmental conditions available.
|
|
Equipment designed for the “weightless” picking and moving of sacks - in polythene, cardboard, hessian, plastic fibre etc...Simple to use, this range of Dalmec machines allows the operator to move bags quickly, accurately and safely within the operating area.
The bags are picked with either a suction head or with a pneumatically clamp. Vacuum is created by an electric motor or by a Venturi ejector.
This range of manipulators offer maximum flexibility in type, design, dimensions and picking systems order to suit the specific requirements of the user and environmental conditions of the working area.
|
|
|
Dalmec has designed and manufactured hundreds of manipulators with special toolings for the handling of textile products having different forms, weights and dimensions.
|
|
Dalmec offer a wide range of manipulators, designed and manufactured for the “weightless” handling of reels and bobbins.
Simple to use, they allow the operator to move reels quickly, accurately and safely within the operating area.
The type, design, dimensions and picking systems incorporated in these manipulators are tailored to suit the specific requirements of the user and the varying environmental conditions available.
|
|
Dalmec offers a range of tooling heads for the “weightless” handling of electrical household appliances.
Simple to use, they allow the operator to move the electrical household appliances quickly, accurately and safely throughout the working area.
These manipulators have been custom-built, with specially adapted design, dimensions and picking systems to suit the specific requirements of the users and the various environmental conditions available.
|
|
The most advanced manipulator
A rigid manipulation principle is often desirable for eccentric handling (loads that can be handled centrically are best manipulated using a flexible or self-suspended principle such as a cable balancer). The most advanced possibility in rigid handling systems is the Master Balancer: because, in this case too, the arms are bare and hollow. So that manoeuvrability is much better than with conventional manipulators which have drive elements and sometimes even ballast weights on the arms, which means that everything moves. (For technical specifications: see table below)
|
|
Pneumatic rope balancers for all types of handling, “weightless”, which allows the minimum effort for the operator for different kinds of parts.
Max capacity 110 kg
Max work radius 7 m
On customer request the following can be supplied:
· Fork liftable self bearing base
· Special handling attachments: mechanical, pneumatic, vacuum o magnetic operated
· Manual or pneumatic rotating or tilting devices
· Jib cranes or light crane bridge or monorails systems, complete with metal supporting frame, delivered as a turn key project
|
|
|
|
|
|
HANDLE YOUR PRODUCTS INTUITIVELY WITH ZE'SOLUTION SAPELEM
ECONOMICIAL
Electric energy.
Eliminate MSD.
INTUTIVE
Follow operators' nature gestures.
No bouton necessary to make movements.
No adjustment necessary to adapt mass changes.
REACTIVE
Reaction time < 0,1 s.
Acceleration up to 1 g.
Max Speed 2 m/s.
POWERFUL
From 0 until 300 kg.
Arm up to 4,7 m.
PRECISE
At Millimeter.
Arm in aluminium : Movements without resistance.
SECURE
Detector of hand presence.
Active security through embedded software.
Power-Cut Management.
ERGONOMIC
Ergo Conception : lightness, sensibility, visibility …
Design for left and right handers.
Effort to make movements < 20 grammes.
ALL PRODUCTS
Cans, boxes, bags, doors, windshields, bumpers, tanks, tubes, bottles, pallets, tyres, ham, spools, eggs, motor parts (water pump, etc.), metallic systems, windows, dashboards, sand core, equipments, moulds, parts of fuselage, yoghurt pots, exhaust system, car batteries, shower trays, sinks, sunroofs, motorbikes engines, bus windscreen, car doors, bonnets, steel cabinets, car seats, aeronautical parts …
ALL FIELDS
Food industry, aeronautics, car industry, textile, cardboard, glass, woodworking, plastic, chemistry, sheet metal, medical, warehouses, electronics, equipments, pharmacy ...
|
|
|
|
|
|
HANDLE YOUR PRODUCTS INTUITIVELY WITH ZE'SOLUTION SAPELEM
ECONOMICIAL
Electric energy.
Eliminate MSD.
INTUTIVE
Follow operators' nature gestures.
No bouton necessary to make movements.
No adjustment necessary to adapt mass changes.
REACTIVE
Reaction time < 0,1 s.
Acceleration up to 1 g.
Max Speed 2 m/s.
POWERFUL
From 0 until 300 kg.
Arm up to 4,7 m.
PRECISE
At Millimeter.
Arm in aluminium : Movements without resistance.
SECURE
Detector of hand presence.
Active security through embedded software.
Power-Cut Management.
ERGONOMIC
Ergo Conception : lightness, sensibility, visibility …
Design for left and right handers.
Effort to make movements < 20 grammes.
ALL PRODUCTS
Cans, boxes, bags, doors, windshields, bumpers, tanks, tubes, bottles, pallets, tyres, ham, spools, eggs, motor parts (water pump, etc.), metallic systems, windows, dashboards, sand core, equipments, moulds, parts of fuselage, yoghurt pots, exhaust system, car batteries, shower trays, sinks, sunroofs, motorbikes engines, bus windscreen, car doors, bonnets, steel cabinets, car seats, aeronautical parts …
ALL FIELDS
Food industry, aeronautics, car industry, textile, cardboard, glass, woodworking, plastic, chemistry, sheet metal, medical, warehouses, electronics, equipments, pharmacy ...
|
|
|
|
|
|
HANDLE YOUR PRODUCTS INTUITIVELY WITH ZE'SOLUTION SAPELEM
ECONOMICIAL
Electric energy.
Eliminate MSD.
INTUTIVE
Follow operators' nature gestures.
No bouton necessary to make movements.
No adjustment necessary to adapt mass changes.
REACTIVE
Reaction time < 0,1 s.
Acceleration up to 1 g.
Max Speed 2 m/s.
POWERFUL
From 0 until 300 kg.
Arm up to 4,7 m.
PRECISE
At Millimeter.
Arm in aluminium : Movements without resistance.
SECURE
Detector of hand presence.
Active security through embedded software.
Power-Cut Management.
ERGONOMIC
Ergo Conception : lightness, sensibility, visibility …
Design for left and right handers.
Effort to make movements < 20 grammes.
ALL PRODUCTS
Cans, boxes, bags, doors, windshields, bumpers, tanks, tubes, bottles, pallets, tyres, ham, spools, eggs, motor parts (water pump, etc.), metallic systems, windows, dashboards, sand core, equipments, moulds, parts of fuselage, yoghurt pots, exhaust system, car batteries, shower trays, sinks, sunroofs, motorbikes engines, bus windscreen, car doors, bonnets, steel cabinets, car seats, aeronautical parts …
ALL FIELDS
Food industry, aeronautics, car industry, textile, cardboard, glass, woodworking, plastic, chemistry, sheet metal, medical, warehouses, electronics, equipments, pharmacy ...
|
|
Pneumatic arm manipulator with pneumatic gripping tool for disks or wheels
180° rotating device, manual operated or by pneumatic motor.
Max capacity 280 kg.
Max work radius 3.7 m.
Max vertical stroke up to 2100 mm.
|
|
Handling attachment with ovalshaped vacuum pad. Indicated for handling of paper, plastic or juta bags.
It is the quickest and economic way to handle bags.
Vacuum generation by electric vane pump.
Max capacity 80 kg.
Accessories: quick disconnection for suction pads, angular adaptor, flexible extended manouvre handle, etc.
|
|
To analyze the requirement of the customer and to link it with the experiment matured during many years it is essential to decide which technical solution will be the key of success of the project
To direct itself towards a solution with rigid arms means to make it possible to the customer to reach high performances of precision on great ranges or complex movements of the product by guaranteeing a perfect stability throughout all operating cycle.
The flexible solutions exaltent the lightness and the speed of the movements, while making the solution essential for the fast and repetitive operating cycles.
The choice of a solution with rigid arms or a flexible solution is the objective of FAMATEC to satisfy the Customer by providing him the solution most appropriate to its requirements.
|
|
|
|
|
|
The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific customer’s requests. Such devices are equipped with movement units which can be manual or pneumatic, and are necessary to the movement cycle.
The usability and functionality of the system are obtained by keeping the operator’s needs at the forefront during the planning phase; they are in fact considered by our personnel a fundamental part of the specific characteristics of the movement products.
The parallelogram shaped ATISmirus are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, fixed overhead or sliding on overhead runway tracks.
Our manipulators do not need electrical power but only compressed air at 5-7 bar. This implies a remarkable reduction of the installation time simplifying the operation of the set-up of the working area.
|
|
|
|
|
|
The ATISmirus manipulators, with parallelogram shaped vertical movement, allow the handling of loads even with jolts, in any direction without ties, with extreme ease and precision.
They can be integrated with personalized gripping devices, planned and structured according to specific customer’s requests. Such devices are equipped with movement units which can be manual or pneumatic, and are necessary to the movement cycle.
The usability and functionality of the system are obtained by keeping the operator’s needs at the forefront during the planning phase; they are in fact considered by our personnel a fundamental part of the specific characteristics of the movement products.
The parallelogram shaped ATISmirus are available in the following configurations: column mounted installed to the floor, column mounted with self-firmed base-plate, fixed overhead or sliding on overhead runway tracks.
Our manipulators do not need electrical power but only compressed air at 5-7 bar. This implies a remarkable reduction of the installation time simplifying the operation of the set-up of the working area.
|
|
|
Manipulating ATISmirus 100 with tool to ventose for the movimentazione of scato them in cardboard. The job cycle previews the disattivazione of the parking brakes acting on the appropriate selector. The tool to ventose comes posizionato from the operator on the product to enliven place on the packing emplacement the taken operation of of the product comes executed from the operator acting on the appropriate push-button of taken predisposed on the tool. Caught up a prestabilito value of empty that it assures abundant emergency, the insertion will be had automatic rifle of the balance to cargo. The operator can enliven therefore the cargo easily acting directly on the grip or the product. The release of the product on pallet is obtained pressing the two push-buttons at the same time affixed to you with consequent restoration in automatic rifle of the balance to empty.
|
|
Pneumatic arm manipulators for all types of handling, “weightless”, which allows the minimum effort for the operator for different kinds of parts.
Max capacity 600 kg
Max work radius 3,7 m
On customer request the following can be supplied:
· Fork liftable self bearing base
· Push or powered trolley for suspended execution
· Special handling attachments: mechanical, pneumatic, vacuum o magnetic operated
· Manual or pneumatic rotating or tilting devices
· Rails systems, complete with metal supporting frame, delivered as a turn key project
|
|
|
|
