|
|
Pneumatic rope balancer with special double fork handling attachment, with adjustable width, provided with mechanical locking of the handled part. Properly designed to handle metallic and/or plastic boxes and cases.
Available also in version with rotating device for the emptying of the contents.
Max capacity 80 kg.
|
|
Equipment designed for the “weightless” picking and moving of sacks - in polythene, cardboard, hessian, plastic fibre etc...Simple to use, this range of Dalmec machines allows the operator to move bags quickly, accurately and safely within the operating area.
The bags are picked with either a suction head or with a pneumatically clamp. Vacuum is created by an electric motor or by a Venturi ejector.
This range of manipulators offer maximum flexibility in type, design, dimensions and picking systems order to suit the specific requirements of the user and environmental conditions of the working area.
|
|
Pneumatic manipulating model Standard with tool of taken for movement bags
Description
The standard solutions allow to head at the certainty of the repetitive and optimized solution as from the numerous solutions supplied on similar demands. FAMATEC Standard offers to perfectly definable times of delivery and a precise definition of the technical aspects in phase of offer.
Technical details
In the event specific draft of an endowed manipulating of a system of taken flowing along the revolving and equipped arm of vertical movement through a detail is arranged of raising of the product. The solution is the ideal for who must enliven similari bags or products quickly (as an example scato them). The taken one happens through a ventosa and successively the product can be raised and moved on the horizontal plane in every point inside of the workspace.
The illustrated solution is available on autostabile base and fixed column.
The maximum capacity 65 kg
Range 4000 milimeter
|
|
Pneumatic linear manipulator with pneumatic gripping tool for parcels of ceramic tiles or for any part that can be gripped pushing on the sides.
Max capacity 200 kg.
Max work radius 7 m.
Max vertical stroke up to 2100 mm.
|
|
|
|
|
|
HANDLE YOUR PRODUCTS INTUITIVELY WITH ZE'SOLUTION SAPELEM
ECONOMICIAL
Electric energy.
Eliminate MSD.
INTUTIVE
Follow operators' nature gestures.
No bouton necessary to make movements.
No adjustment necessary to adapt mass changes.
REACTIVE
Reaction time < 0,1 s.
Acceleration up to 1 g.
Max Speed 2 m/s.
POWERFUL
From 0 until 300 kg.
Arm up to 4,7 m.
PRECISE
At Millimeter.
Arm in aluminium : Movements without resistance.
SECURE
Detector of hand presence.
Active security through embedded software.
Power-Cut Management.
ERGONOMIC
Ergo Conception : lightness, sensibility, visibility …
Design for left and right handers.
Effort to make movements < 20 grammes.
ALL PRODUCTS
Cans, boxes, bags, doors, windshields, bumpers, tanks, tubes, bottles, pallets, tyres, ham, spools, eggs, motor parts (water pump, etc.), metallic systems, windows, dashboards, sand core, equipments, moulds, parts of fuselage, yoghurt pots, exhaust system, car batteries, shower trays, sinks, sunroofs, motorbikes engines, bus windscreen, car doors, bonnets, steel cabinets, car seats, aeronautical parts …
ALL FIELDS
Food industry, aeronautics, car industry, textile, cardboard, glass, woodworking, plastic, chemistry, sheet metal, medical, warehouses, electronics, equipments, pharmacy ...
|
|
|
The manipulator with cable makes it possible to handle paperboards going from 0 to 300 kg with a suction cup gripping while optimizing the operating areas available, in perfect ergonomics and in full safety for the men and the material.
|
|
The Tube of Lifting uses the same flow of aspiration for the catch of the product, the lifting and the transfer of the load. Thanks to this system of aspiration of reliable and robust design, it is possible to handle loads without effort in any safety for your operations of handling, palletization or depalettisation.
Charge up to 200 kg
Type charges: bags, paperboard, drum
|
|
To support all types of controls on the ground: pushbutton box, control for stages, various levels or staircase...
With detent pawl: allows to block control on the ground with the desired height, to free to draw downwards.
Automatic recall by spring.
Rope steel covered plastic.
Drum painted steel, support aluminum.
N.B. to take account of the weight of the pushbutton box as well as weight of the electrical cable to support
|
|
| ... products without technical information |
| |
HAMO KG
Cleaning System for Containers
Wash chamber 1000-1200/1300-2000/1700-2900 mm (39.37-47.24/51.18-86.61/66.93-114.17 inches) (W/H/D).
The economical system for cleaning, drying.
The HAMO KG was developed specifically for industrial areas. The machine is designed for cleaning the following parts:
* large parts with dimension as of 1000/1000/1000 mm (39.37/39.37/39.37 inches) (W/H/D)
|
|
Baskets HAMO LS-2000
HAMO offers you a wide range of racks for cleaning glassware, containers, instruments and AN-equipment
HAMO DW
Cleaning, Disinfecting and Drying System
Wash chamber 1000/2000/1600-2700 mm (39.97/78.37/63.00-106.30 inches) (W/H/D).
The economical machine for cleaning, disinfecting of beds, OP-tables, conveyors, containers.
Highest Demands for Cleaning and Disinfection in Hospitals
|
|
TURBO 24/36
The T24 and T36 are Graymills most economical total immersion cleaners and are offered in both solvent and aqueous (heated) versions
STANDARD FEATURES
* Total parts immersion provides hands-off cleaning without operator involvement
* Grid platform supports parts above bottom - allows for all sides of parts to be exposed to cleaning solution
* "V" shaped tank bottom with two inch center drain for easy cleaning and fluid change outs
* Turbo-action units scour and flush parts clean with a pump that provides 3000 GPH
* Multiple tank sizes up to 118 gallon capacity
* Solvent or aqueous models available; some models can be field-retrofit and converted to aqueous versions if cleaning method changes
* Fusible safety link closes lid in event of a fire
* Energy saving insulation and stainless steel lined lids (aqueous only)
* Refer to voltage options for additional details on wiring options
|
|
CLEAN-O-MATIC 902-A
Dual pump version of the Model 900 includes two Hydro-Jet manifolds to deliver the most internal fluid agitation available for the Clean-O-Matic series.
STANDARD FEATURES
* 49"L x 28-1/2"W x 33-3/8"H work space
* 50-117 gallon capacity
* Pump with Hydro-Jet manifold provides active in-tank fluid agitation
* Two 1/3 HP Graymills Superflo pumps, 2400 GPH each, provide aggressive in-tank fluid agitation through dual Hydro-Jet manifolds operating independently or together
|
|
| ... products without technical information |
| |
|
|
|
|
IBC Mixers
Mixing in Intermediary Bulk Containers (IBCs) can be a challenging task. With the restricted opening and problematic vessel geometry it is difficult to find a mixer which can operate efficiently in these containers. Conventional agitators can provide adequate in-tank movement at low viscosities, but they are generally less effective and can be difficult to clean.
The Silverson Ultramix is designed to provide solutions to challenges such as this. The small diameter dynamic mixing head provides vigorous in-tank mixing, even at higher viscosities, eliminating dead areas in square vessels. This also reduces power requirements and simplifies cleaning – the Ultramix is designed for CIP (Cleaning-in-Place) and complies with 3A, USDA and cGMP requirements.
To further enhance the capabilities of the Ultramix in this application Silverson has designed a mixing station for use with IBCs. The unit incorporates a number of safety features and is available as either a mobile model which can be moved between vessels, or a floor/wall mounted station for operation in a designated area. Various levels of automation are available from safety interlocked manual operation to fully automated systems.
|
|
A container mixing unit is designed for a particular size of container and cannot mix any size of container. The closing cone of the container must be secured with a cover (screwed into the cone) prior to mixing. The operation of container mixing may be fully automated, included the positioning of the container in the mixing unit, and its removal.
Working Principle:
The optimal mixing conditions are:
- duration : approx. 10 min
- mixing batch : maximum 1000 kg of powder
- filling % : 60 % of the container volume
- Rotation : 8 – 10 RPM
- Container volume: 500 to 1500 lt
|
|
EDUCTOR PRINCIPLES:
BEX eductors use a unique venturi design which enables smaller pumps to circulate large volumes of tank solution. The eductor will circulate four to five gallons of solution for each gallon pumped.
BEX eductors are used for mixing chemicals, suspending solids, adjusting pH, "sweeping" debris or sludge toward a filter intake and many other useful applications.
TYPICAL APPLICATIONS:
- Plating tanks
- Cleaning tanks
- Phosphating tanks
- E-coat tanks
- Fertilizer tanks
- Pulp tanks
- Sludge tanks
- Paint booths
- Anodizing tanks
- Cooling towers
- Decorative fountains, and more...!
|
|
|
Eductors %u2014 These jet mixing eductors are placed in a vessel and fed by a recirculation line. The recirculated liquid sucks in surrounding liquid from the vessel, mixes with it, and is ejected. The ejected liquid promotes further mixing by forming a swirling flow inside the vessel
|
|
|
JOGINDRA Container Mixer is specially designed for cold mixing process for all polymer powders or granules with colorants and or additives for concentrated master batches. The mixer is in two parts i.e. Mixer and Storage Hopper. Initially the mixing head is facing to ground and is in a position for lifting and clamping to Container and finally rotate to 180º for mixing. The cleaning time is reduced to a minimum. The mixing bowl is made of stainless steel with lockable system and gasket to prevent leakage during operation. The mixer ensures gentle product treatment and has shorter mixing times. PLC can be supplied on request.
|
|
| ... products without technical information |
| |
Coke unloading
Fives Solios takes into account the whole process of handling all raw materials at the inlet of the anodes plant, as well as storing and unloading the pitch at the terminal.
Fives Solios equips the anodes plant with a station for unloading the coke destined to trucks equipped with automatic unloading "udders". It integrates the collection of dust and storage in daily coke silos.
|
|
Ship container BULK loader type CBL
New unique loader ideal for loading of dry bulk commodities into containers, such as sugar, malt, fish meal, grain or almost any other granular product.
Sturdy screw conveyor with special designed pressure outlet for optimum filling of container liner.
Remote controlled sidewise and vertical movement of outlet.
Easy moveable by e.g. a fork lift truck.
Feeding hopper for connection to a gravity bellow feeder or other customer specific feeding system.
Capacity: one 20 feet container in 20 minutes.
New:
We can now also supply a unique pneumatic container un-loading system.
|
|
BULK CONTAINER FILLING
FIBCs, Octabins, boxes and other types of semi-bulk packaging are a cost-effective variant when compared to bags and other small packages.
The following large types of packages are effectively filled and proven in use by HAVER machines:
1-loop FIBCs
2-loop FIBCs
4-loop FIBCs
boxes / Octabins
barrels and drums
|
|
|
|
|
|
The tipping horizontal pressure tank O.ME.P.S. type CM 25 is manufactured of Peraluman 45 R light alloy to transport powdery foodstuff (flour) for a total capacity of 25 m3. It is tested at 2 bar pressure according to the standard PED 97/23/CE.
The vertical discharge system is equipped with:
n° 03 load manholes with 3 wing nuts’ closing;
atoxic and polyvalent unloading system;
n° 1 aluminium bottom for the product unloading, complete of butterfly valve, Ø 150 mm;
atoxic rubber pipeline;
accident protection (n° 1 anti-slip ladder, n° 1 gangway with a pneumatic safety handrail) according to the standard C.M. 294/93;
n° 2 unloading hoses, Ø 100 mm, 6 m long, complete of their hosetubes;
tank chassis in S 355 JR steel, equipped with n° 2 saddles for the tank support;
hydraulic system compound of tipping cylinder, valves group for the control, hydraulic circuit with pipeline and connectors, hydraulic oil tank, rear stabilizing legs, kit hydraulic pump
Tank painting: unique tint O.ME.P.S. WHITE (different colour/logo application on demand)
Structure guarantee: 24 months.
The tank is homologated in accordance with the standard PED 97/23/CE
* Supply and assembly of N° 1 GHH - RAND COMPRESSORS TYPE CG 80, PTO not included (supply by your side).
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
